What Have You Done To Your Explorer ST Today

[Diamondave]

I have running boards that secure to the same pinch weld seam. Will the Jack Pads work?

 

[BrooseDaMoose]

I have running boards that secure to the same pinch weld seam. Will the Jack Pads work?

No. The jack pads go around the pinch weld seam so the running boards would be in the way. You may be able to get creative and notch out the running boards.


Sent from my iPhone using Tapatalk

 

[Caster]

Installed the Dewhel jack pads today along with M6x25mm stainless cap head screws and blue loctite.

https://a.co/d/aPwTvlC
https://a.co/d/fyek1ZU

View attachment 25863

How many come per order? Not sure if I'm missing the quantity listing in the Amazon link you provided. The title description leads me to believe that it's $45 per jack block but in the product description they show (4).

 

[UGADawg96]

How many come per order? Not sure if I'm missing the quantity listing in the Amazon link you provided. The title description leads me to believe that it's $45 per jack block but in the product description they show (4).

View attachment 25877

Four came in the box for the 45$. They are half the price of the ZL1s.

 

[Caster]

Four came in the box for the 45$. They are half the price of the ZL1s.

Thank you. I just placed my order. I've been eyeing these for a while. I used one of my rubber pads with the groove in it with my jack on Friday on my ST and when I was done, the rubber was already splitting and it was brand new. Hopefully this solves that issue and I won't need the rubber pad for anything now.

 

[UGADawg96]

How many come per order? Not sure if I'm missing the quantity listing in the Amazon link you provided. The title description leads me to believe that it's $45 per jack block but in the product description they show (4).

View attachment 25877

Here is the box the four came in along with the included little set screws. You can see how short they are. Once engaged, they are barely in the pad anymore and most of their bite is in the gap. The cap screws are much longer so you can get more bite in the pad housing.

 

[BrooseDaMoose]

How many come per order? Not sure if I'm missing the quantity listing in the Amazon link you provided. The title description leads me to believe that it's $45 per jack block but in the product description they show (4).

View attachment 25877

According to the Q&A it comes with 4.


Sent from my iPhone using Tapatalk

 

[UNBROKEN]

Thank you. I just placed my order. I've been eyeing these for a while. I used one of my rubber pads with the groove in it with my jack on Friday on my ST and when I was done, the rubber was already splitting and it was brand new. Hopefully this solves that issue and I won't need the rubber pad for anything now.

Technically you don’t need anything at all. The car is designed to be lifted from the pinch weld in the marked area. All this add on stuff does is empty peoples wallets.

 

[Cruising68]

I like those. I have the carbon fiber side skirts so those won’t work for me. I use 4 of these when I need to break out the quick jack. Just don’t forget to pull them off before driving away

https://a.co/d/6y4OUkC


Sent from my iPad using Tapatalk

 

[Caster]

According to the Q&A it comes with 4.


Sent from my iPhone using Tapatalk

I typed in "quantity" in the search bar and nothing came up. Also, another person responded in a way that made it sound like they only received one. Anyway, sounds like all will be well now!

 

[Caster]

Technically you don’t need anything at all. The car is designed to be lifted from the pinch weld in the marked area. All this add on stuff does is empty peoples wallets.

I haven't seen many vehicles lifted from the pinch weld without a slotted rubber block or slotted lift head on the jack (like the factory jack in with the spare tire) that doesn't bend or f'-up the pinch weld. I know this first hand.

Tire shops - Why anyone needs to do this at this pont in time is beyond me since pinch weld jack points aren't new, but, it seems more times than not, you need to school your tire shop on how to lift your vehicle with pinch welds. They F' them up A LOT. That's my own personal experience as well as quite a few other people I know. I'm sure plenty of people on here can attest to that same thing from their own tire shop experiences.

 

[UNBROKEN]

I haven't seen many vehicles lifted from the pinch weld without a slotted rubber block or slotted lift head on the jack (like the factory jack in with the spare tire) that doesn't bend or f'-up the pinch weld. I know this first hand.

Tire shops - Why anyone needs to do this at this pont in time is beyond me since pinch weld jack points aren't new, but, it seems more times than not, you need to school your tire shop on how to lift your vehicle with pinch welds. They F' them up A LOT. That's my own personal experience as well as quite a few other people I know. I'm sure plenty of people on here can attest to that same thing from their own tire shop experiences.

A shop screwing something up doesn’t make the lift point bad. Unibody cars have been designed to lift from the pinch weld since the dawn of unibody cars almost. Done correctly no damage will occur.

 

[Caster]

A shop screwing something up doesn’t make the lift point bad. Unibody cars have been designed to lift from the pinch weld since the dawn of unibody cars almost. Done correctly no damage will occur.

Exactly my point. I'm not dissing the pinch weld, I'm dissing people not caring about, or being ignorant, with our vehicles and causing preventable damage. Adding these block should help. If it's a waste of $45, so be it. You are the king of buying un-needed stuff for your ST!! I mean that playfully and not in a Richard kind of way! You have lots of cool mods. I have a HUGE lifted F-150 with more money in the mods than the cost of the truck new. I know exactly how the modification game works!

 

[Cruising68]

Yes pinch weld jack points have been around forever. Unfortunately brainless techs seem to be plentiful. First trip to the dealer and they folded one of my jack points. No excuse imo for a dealer. Right after that I fixed it and bought those pinch weld plates. Every time I HAVE to use a shop I stick them to the pinch welds (magnetic) and point it out to the tech. Cheap insurance imo.


Sent from my iPad using Tapatalk

 

[FlatSpot]

My 2025 is coming along. So far I have installed the Eibach lowering springs, Steeda Front and Rear sway bars with links, Steeda strut tower brace, Thermal R&D 3" Catback, removed the luggage racks, tinted the front door windows.

 

[BrooseDaMoose]

My 2025 is coming along. So far I have installed the Eibach lowering springs, Steeda Front and Rear sway bars with links, Steeda strut tower brace, Thermal R&D 3" Catback, removed the luggage racks, tinted the front door windows. View attachment 25989 View attachment 25990

Lookin’ good man!


Sent from my iPhone using Tapatalk

 

[bcsugarhill]

Have any of you had your front driver/ passenger windows tinted? Just picked mine up yesterday, and I can't be sure, but I think the windows are tinted? but I can't find anything on the factory order showing those driver / passenger side front door windows being tinted... but there is one window that has a slight flaw like dust caught behind a film tint, which leads me to think its been tinted. So just curious if somebody had experience with that before? or know if the 2025's come with tinted windows on the front driver/ passenger side door?

 

[Mako]

My 2025 is coming along. So far I have installed the Eibach lowering springs, Steeda Front and Rear sway bars with links, Steeda strut tower brace, Thermal R&D 3" Catback, removed the luggage racks, tinted the front door windows. View attachment 25989 View attachment 25990

Do you have spacers?

 

[BrooseDaMoose]

Blacked out my ST emblems using The OCD Plug overlays. They fit really well. Also put on my matte black lettering on the lifgate.

 

[FlatSpot]

Do you have spacers?

No. I plan to install some 22x10.5" Velgen Wheels early next year.