• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Mercon ULV ATF vs Amsoil SS Transmission Fluid

Floc

Member
Messages
27
Reactions
7
Points
2
Location
Ontario
Vehicle
2020 explorer st
#21
Since there are a lot of people in this thread with experience doing fluid changes with these transmissions, I had a couple questions.
1) how often are you doing fluid changes, and are they mostly just spill and fill?
2) I plan on using a fluid extractor instead of removing the pan. How much trans fluid does the pan hold? I don't mind doing this one a year to keep the fluid fresh.

Thanks for any information you can provide.
 

Cruising68

1000 Post Club
Messages
1,677
Reactions
1,228
Points
262
Location
Chicago, IL, USA
#22
I changed the filter the first drain and fill at 20k. 25-30k for the next one. Double drain and fill with some driving in between. Probably won’t change the filter again until 100k. I have a PPE pan with a drain. Iirc I get about 6 qts out.


Sent from my iPhone using Tapatalk
 

Cdubya

1000 Post Club
Messages
1,732
Reactions
867
Points
262
Location
NE Ohio
Vehicle
2020 Explorer ST
#23
dropping the pan, you can exchange 6qts, with vacuum extraction from the dipstick hole, about 4 qts.
 

RAYJAY

New Member
Messages
21
Reactions
14
Points
2
Location
Union Dale Pa
Vehicle
2021 explorer limited
#24
And with the amount of people that got their panties in a bunch about the Ford Performance tune and keeping their warranty I wonder how many threw in a non spec fluid because some guy pulled up to their house and did a spill and fill..... I really hope their transmissions hold up but if a bunch start blowing up and Ford starts running a fluid analysis there are going to be a lot of pissed off people..... When I had my XFR I had to run a certain type of oil because Jag spec'd a dye in it and would deny warranty claims if you were caught not using and then you have the whole Dexos thing with GM.....

When I changed my fluid over the summer I used Valvoline ULV instead of the OEM fluid.
see any difference ??
 

Messages
229
Reactions
92
Points
27
Location
Jessup, MD, USA
#25
Last edited:

Cruising68

1000 Post Club
Messages
1,677
Reactions
1,228
Points
262
Location
Chicago, IL, USA
#26
Is this a new product by Amsoil that does meet the spec?

AMSOIL Signature Series ULV 100% Synthetic Automatic Transmission Fluid | ULV1G-EA - AMSOIL

Looks like it was just announced on 10-31-2024.

I only took a quick glance, but the specs seem pretty close to what the Mercon ULV is.
Looks to be the right viscosity. It’s likely good to go but Amsoil is not big on paying for rating approvals. I’ve used many of their products over the years with good results. Not currently running any Amsoil in the ST. Mobil1 oil, liquid-moly in the tranny, and valvoline synthetic in the diffs.


Sent from my iPad using Tapatalk
 

Messages
229
Reactions
92
Points
27
Location
Jessup, MD, USA
#27
Looks to be the right viscosity. It’s likely good to go but Amsoil is not big on paying for rating approvals. I’ve used many of their products over the years with good results. Not currently running any Amsoil in the ST. Mobil1 oil, liquid-moly in the tranny, and valvoline synthetic in the diffs.


Sent from my iPad using Tapatalk
How are you liking the Valvoline products? Did you put their ATF in the transfer case as well?

Which liquimoly are you using in the trans? I'm guessing Toptec 1850?
 

Last edited:

Cruising68

1000 Post Club
Messages
1,677
Reactions
1,228
Points
262
Location
Chicago, IL, USA
#28
How are you liking the Valvoline products? Did you put their ATF in the transfer case as well?

Which liquimoly are you using in the trans? I'm guessing Toptec 1850?
I’ve switched between Mobil1 and Valvoline synthetic for the past 40 years. Had a fleet of trucks with towing involved when I owned a business and always stuck with quality fluids and early changes for trans and gears. That seemed to serve me well.

Yes, running the 1850 in the trans. Ran a case of motorcraft through it first double drain/fill but was not 100% convinced it was full synthetic. Switched to the liqui-moly. Don’t notice any difference in shifting.

Don’t recall what I put in the tcase


Sent from my iPhone using Tapatalk
 

Messages
229
Reactions
92
Points
27
Location
Jessup, MD, USA
#29
I’ve switched between Mobil1 and Valvoline synthetic for the past 40 years. Had a fleet of trucks with towing involved when I owned a business and always stuck with quality fluids and early changes for trans and gears. That seemed to serve me well.

Yes, running the 1850 in the trans. Ran a case of motorcraft through it first double drain/fill but was not 100% convinced it was full synthetic. Switched to the liqui-moly. Don’t notice any difference in shifting.

Don’t recall what I put in the tcase


Sent from my iPhone using Tapatalk
For some reason, I can't find the LiquiMoly 1850 anymore. Only the 1800 and 1900.

I am thinking about trying HPL Teal next, it meets the ULV spec.
 

Explorer ST Posts



Top