• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


New Vossen Hybrid Forged

Messages
375
Reactions
157
Points
37
Location
El Paso, TX, USA
#43
Still 3 weeks out


Sent from my iPhone using Tapatalk
Negative . Hopefully in the next couple weeks


Sent from my iPhone using Tapatalk
What happened to your order ? I called Vossen today and they told me mine are 2-3 weeks from shipping and mine were special order also . Seems like we will be getting them around the same time but i thought you ordered yours before me .
 

OP
Nbk4t5e

Nbk4t5e

Active Member
Messages
852
Reactions
555
Points
232
Location
San Antonio, TX, USA
Thread Starter #44
What happened to your order ? I called Vossen today and they told me mine are 2-3 weeks from shipping and mine were special order also . Seems like we will be getting them around the same time but i thought you ordered yours before me .
I changed the order on the width and that pushed the date back


Sent from my iPhone using Tapatalk
 

Messages
375
Reactions
157
Points
37
Location
El Paso, TX, USA
#45
I changed the order on the width and that pushed the date back


Sent from my iPhone using Tapatalk
Well that makes sense . I stayed with a 9 wide because we don't make enough power to need a wider tire . I might go with some spacers to push them out a bit . 1/4" up front and 1/2" out back . I also went with a slightly shorter overall diameter on my wheel / tire combo . I figured if i was going to lower it , it might as well be lower to the ground . I figured the overall cost difference between a 10.5" wheel and tire to a 9" could be used towards other mods .

Just out of curiosity , what did you guys pay for your 10.5 combo ?
 

OP
Nbk4t5e

Nbk4t5e

Active Member
Messages
852
Reactions
555
Points
232
Location
San Antonio, TX, USA
Thread Starter #46
Well that makes sense . I stayed with a 9 wide because we don't make enough power to need a wider tire . I might go with some spacers to push them out a bit . 1/4" up front and 1/2" out back . I also went with a slightly shorter overall diameter on my wheel / tire combo . I figured if i was going to lower it , it might as well be lower to the ground . I figured the overall cost difference between a 10.5" wheel and tire to a 9" could be used towards other mods .

Just out of curiosity , what did you guys pay for your 10.5 combo ?
I got them for 700.00 each. But I have a great hook up Still looking at tires.


Sent from my iPhone using Tapatalk
 

Messages
375
Reactions
157
Points
37
Location
El Paso, TX, USA
#47
I got them for 700.00 each. But I have a great hook up Still looking at tires.


Sent from my iPhone using Tapatalk
You did get a good deal . I have a good hook up also which is why I paid so little for my setup . I did satin silver with gloss red center caps .
 

OP
Nbk4t5e

Nbk4t5e

Active Member
Messages
852
Reactions
555
Points
232
Location
San Antonio, TX, USA
Thread Starter #48
You did get a good deal . I have a good hook up also which is why I paid so little for my setup . I did satin silver with gloss red center caps .
Nice!! That will look clean


Sent from my iPhone using Tapatalk
 

UNBROKEN

4000 Post Club
Messages
4,587
Reactions
5,362
Points
352
Location
Houston, TX, USA
#49
There’s more to it than just putting power to the ground. A 10.5 at +30 adds over 2” to the track width and puts over an inch more rubber on the road on all 4 corners. That makes a substantial difference in handling and how fast you can throw it through corners.
 

Messages
375
Reactions
157
Points
37
Location
El Paso, TX, USA
#50
There’s more to it than just putting power to the ground. A 10.5 at +30 adds over 2” to the track width and puts over an inch more rubber on the road on all 4 corners. That makes a substantial difference in handling and how fast you can throw it through corners.
I'm not arguing with you over that . I completely understand what the purpose of a wider wheel/tire combo , track width does . I was merely saying that in this platform , actually people auto crossing or track racing is probably going to be few and far between . A competitive racer , or even occasional racer , is not out looking at a 50k+ Ford suv .

I personally love this ST and i am going to do mods to it that others may not like or understand but i don't care .
 

UNBROKEN

4000 Post Club
Messages
4,587
Reactions
5,362
Points
352
Location
Houston, TX, USA
#51
I took mine out and flogged the hell out of it on some twisty roads with a local car group last weekend. Considering they have a damn near 50/50 weight balance it surprised me with how well it took to the roads. Some bigger sway bars would turn these things into a real corner carver. The only time I was out-driven was on corner exits...it’s obviously lacking the power of the cars I was with but those guys were pretty surprised too.
Race car? Hell no...but there’s a lot of potential here.
 

Messages
78
Reactions
94
Points
17
Location
Savannah, GA, USA
#52
Coming from a Mustang with 305/30 front and 325/30 rears, everything smaller than a 305 looks weird to me. I love wide tires and I cannot lie...
 

UNBROKEN

4000 Post Club
Messages
4,587
Reactions
5,362
Points
352
Location
Houston, TX, USA
#53
Coming from a Mustang with 305/30 front and 325/30 rears, everything smaller than a 305 looks weird to me. I love wide tires and I cannot lie...
I was working out the offset and tire sizes last night to run a 22x12 out back with a 325/35. Bad thing is I’d have to run a 285/40 up front for equal heights and they’re both 31” tall. I’m not done thinking it through. lol
 

Messages
78
Reactions
94
Points
17
Location
Savannah, GA, USA
#54
I like a little bit of rake from back to front honestly as long as it's not too extreme.
 

UNBROKEN

4000 Post Club
Messages
4,587
Reactions
5,362
Points
352
Location
Houston, TX, USA
#55
I like a little stagger but I don’t want to run 285’s on a 10.5” wheel and the wife wouldn’t be too happy if I had another full set of wheels built a month after the first set. lol
 

Messages
375
Reactions
157
Points
37
Location
El Paso, TX, USA
#56
I took mine out and flogged the hell out of it on some twisty roads with a local car group last weekend. Considering they have a damn near 50/50 weight balance it surprised me with how well it took to the roads. Some bigger sway bars would turn these things into a real corner carver. The only time I was out-driven was on corner exits...it’s obviously lacking the power of the cars I was with but those guys were pretty surprised too.
Race car? Hell no...but there’s a lot of potential here.
Completely agree 100%

......but do you think you couldn't have done that with the 9" wide with spacer setup ? I would be willing to bet the 9" wide would perform the same . Now tack on another 100+whp and yes , I would think that it is almost essential to go wider . I am not knocking anyone that went 10.5 because i think it looks fantastic and does serve a purpose if you are using it for very spirited driving adventures....like you do . I am merely stating that most people will not use the vehicle for the same purpose . I also do my occasional spirited driving but i thought , for my purpose , i would use the extra money towards other mods that i want to do .

Lastly , if you are going to run through some twisty roads at speed.....put it on camera so we can enjoy it also (y)(y)(y)
 

UNBROKEN

4000 Post Club
Messages
4,587
Reactions
5,362
Points
352
Location
Houston, TX, USA
#57
I need to buy another GoPro...but I need to buy car parts worse. lol
 

Messages
375
Reactions
157
Points
37
Location
El Paso, TX, USA
#58
I need to buy another GoPro...but I need to buy car parts worse. lol
Me too....on both needs .

I had my GoPro i took out with some guys when i had my TT Ferrari 360 . Left it on someone's car and they were nice enough to not return it .
 

Messages
375
Reactions
157
Points
37
Location
El Paso, TX, USA
#59
and now it's a race to see who get's them on first (y)
 



Top