-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!
Infotainment wont stay in dark mode
- Thread starter StayinStock
- Start date
Same problems for the past two weeks for me.
Hard/Soft reset is not going to fix it. Nor does a software update.
I made my peace with it and let it do its own thing now.
It is haunting a lot of people lately. No fix from Ford till date.
Just waiting for a stable update
Another thread here
Hard/Soft reset is not going to fix it. Nor does a software update.
I made my peace with it and let it do its own thing now.
It is haunting a lot of people lately. No fix from Ford till date.
Just waiting for a stable update
Another thread here
The display and background setting is the most subtle symptom which starts the ordeal of no retention of many settings due to lack of memory. I've been dealing with this for almost 2 months. A master reset helped at first until the memory got full again. The most annoying things are radio defaulting to FM instead of satellite, only 2 pages of preset channels, half a navigation map and FordPass disconnecting.
-
1
- Show All
I had the same thing happening, I fixed the issue. Check the FB group.
https://www.facebook.com/groups/730564520677528/permalink/1890360091364626/?mibextid=cr9u03
https://www.facebook.com/groups/730564520677528/permalink/1890360091364626/?mibextid=cr9u03
May 31, 2023
To everyone having issues with 22251 forgetting it’s settings, Nav only showing half the screen, etc let’s hope 23088 is the fix.
I installed it tonight so I should know by the end of the week.
The issues I had with sync 22251 after every key cycle:
Radio would default to FM or radio starts on "station 0 - SSID"
Nav only shows bottom half of the screen (intermittent)
Couldn’t make it show more than 2 pages of presets
Ambient lights would be off
Infotainment Display theme would default to auto
Apply CarPlay notification would display
Ford connect settings acceptance popup
Wouldn’t remember Wi-Fi network
Pixelation if camera image, like outlines of thing are pixelated, not the whole screen.
June 10, 2023
Update time!
23088 did NOT fix the issues and they came back within about 2 days.
Turns out when comparing the software data 23088 is almost identical to 22251 as a program package. It still has the issue of rwdata not dumping periodically, which is causing the APIM to change settings back to factory defaults because it is out of memory.
The rwdata should have 500-700Mb available at any given time
22251 always had 0Mb available space in rwdata
23088 I had 0-29Mb available in rwdata
I did however fix the issue.
I downgraded back to 22200. I now have 600-700Mb available in rwdata and all of my settings are holding strong for the last week. I check my rwdata size daily and it has never gotten lower than 600Mb available.
Initially I tried a few times to install and had memory errors and it would fail.
In order to downgrade I had to do a master reset and then 2 soft resets back to back, then I had enough space for the install to start and complete successfully.
I think it goes without saying but I’m going to say it anyways for the people who need to read it:
DO NOT Re-connect to Wi-Fi, and disable automatic updates after downgrading to 22200. If you connect to Wi-Fi it will download/install 22251 again and you’ll be back to the crap version.
To consolidate this post and post #14
Program you need
How to setup the program
Use the USB it creates like you would normally.
To everyone having issues with 22251 forgetting it’s settings, Nav only showing half the screen, etc let’s hope 23088 is the fix.
I installed it tonight so I should know by the end of the week.
The issues I had with sync 22251 after every key cycle:
Radio would default to FM or radio starts on "station 0 - SSID"
Nav only shows bottom half of the screen (intermittent)
Couldn’t make it show more than 2 pages of presets
Ambient lights would be off
Infotainment Display theme would default to auto
Apply CarPlay notification would display
Ford connect settings acceptance popup
Wouldn’t remember Wi-Fi network
Pixelation if camera image, like outlines of thing are pixelated, not the whole screen.
June 10, 2023
Update time!
23088 did NOT fix the issues and they came back within about 2 days.
Turns out when comparing the software data 23088 is almost identical to 22251 as a program package. It still has the issue of rwdata not dumping periodically, which is causing the APIM to change settings back to factory defaults because it is out of memory.
The rwdata should have 500-700Mb available at any given time
22251 always had 0Mb available space in rwdata
23088 I had 0-29Mb available in rwdata
I did however fix the issue.
I downgraded back to 22200. I now have 600-700Mb available in rwdata and all of my settings are holding strong for the last week. I check my rwdata size daily and it has never gotten lower than 600Mb available.
Initially I tried a few times to install and had memory errors and it would fail.
In order to downgrade I had to do a master reset and then 2 soft resets back to back, then I had enough space for the install to start and complete successfully.
I think it goes without saying but I’m going to say it anyways for the people who need to read it:
DO NOT Re-connect to Wi-Fi, and disable automatic updates after downgrading to 22200. If you connect to Wi-Fi it will download/install 22251 again and you’ll be back to the crap version.
To consolidate this post and post #14
Program you need
How to setup the program
Use the USB it creates like you would normally.
Last edited:
-
3
- Show All
