• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


What Have You Done To Your Explorer ST Today

UGADawg96

UGADawg96

Member
#2,881
Messages
88
Reactions
95
Points
17
Location
JAX, FL
Vehicle
25 Explorer ST & 21 F150 PB
#2,881
Caster said:
How many come per order? Not sure if I'm missing the quantity listing in the Amazon link you provided. The title description leads me to believe that it's $45 per jack block but in the product description they show (4).

View attachment 25877
Click to expand...
Four came in the box for the 45$. They are half the price of the ZL1s.
 

C

Caster

Member
#2,882
Messages
262
Reactions
239
Points
37
Location
Michigan
#2,882
UGADawg96 said:
Four came in the box for the 45$. They are half the price of the ZL1s.
Click to expand...
Thank you. I just placed my order. I've been eyeing these for a while. I used one of my rubber pads with the groove in it with my jack on Friday on my ST and when I was done, the rubber was already splitting and it was brand new. Hopefully this solves that issue and I won't need the rubber pad for anything now.
 

UGADawg96

UGADawg96

Member
#2,883
Messages
88
Reactions
95
Points
17
Location
JAX, FL
Vehicle
25 Explorer ST & 21 F150 PB
#2,883
Caster said:
How many come per order? Not sure if I'm missing the quantity listing in the Amazon link you provided. The title description leads me to believe that it's $45 per jack block but in the product description they show (4).

View attachment 25877
Click to expand...
Here is the box the four came in along with the included little set screws. You can see how short they are. Once engaged, they are barely in the pad anymore and most of their bite is in the gap. The cap screws are much longer so you can get more bite in the pad housing.

1730037705714.png
 

BrooseDaMoose

BrooseDaMoose

Active Member
#2,884
Messages
946
Reactions
531
Points
82
Location
East Freetown, MA
Vehicle
2020 Explorer ST, Silver Spruce Metalic
#2,884
Caster said:
How many come per order? Not sure if I'm missing the quantity listing in the Amazon link you provided. The title description leads me to believe that it's $45 per jack block but in the product description they show (4).

View attachment 25877
Click to expand...
According to the Q&A it comes with 4.


Sent from my iPhone using Tapatalk
 

UNBROKEN

UNBROKEN

4000 Post Club
#2,885
Messages
4,587
Reactions
5,362
Points
352
Location
Houston, TX, USA
#2,885
Caster said:
Thank you. I just placed my order. I've been eyeing these for a while. I used one of my rubber pads with the groove in it with my jack on Friday on my ST and when I was done, the rubber was already splitting and it was brand new. Hopefully this solves that issue and I won't need the rubber pad for anything now.
Click to expand...
Technically you don’t need anything at all. The car is designed to be lifted from the pinch weld in the marked area. All this add on stuff does is empty peoples wallets.
 

C

Cruising68

1000 Post Club
#2,886
Messages
1,627
Reactions
1,185
Points
262
Location
Chicago, IL, USA
#2,886
I like those. I have the carbon fiber side skirts so those won’t work for me. I use 4 of these when I need to break out the quick jack. Just don’t forget to pull them off before driving away

https://a.co/d/6y4OUkC


Sent from my iPad using Tapatalk
 

C

Caster

Member
#2,887
Messages
262
Reactions
239
Points
37
Location
Michigan
#2,887
BrooseDaMoose said:
According to the Q&A it comes with 4.


Sent from my iPhone using Tapatalk
Click to expand...
I typed in "quantity" in the search bar and nothing came up. Also, another person responded in a way that made it sound like they only received one. Anyway, sounds like all will be well now!
 

C

Caster

Member
#2,888
Messages
262
Reactions
239
Points
37
Location
Michigan
#2,888
UNBROKEN said:
Technically you don’t need anything at all. The car is designed to be lifted from the pinch weld in the marked area. All this add on stuff does is empty peoples wallets.
Click to expand...
I haven't seen many vehicles lifted from the pinch weld without a slotted rubber block or slotted lift head on the jack (like the factory jack in with the spare tire) that doesn't bend or f'-up the pinch weld. I know this first hand.

Tire shops - Why anyone needs to do this at this pont in time is beyond me since pinch weld jack points aren't new, but, it seems more times than not, you need to school your tire shop on how to lift your vehicle with pinch welds. They F' them up A LOT. That's my own personal experience as well as quite a few other people I know. I'm sure plenty of people on here can attest to that same thing from their own tire shop experiences.
 

UNBROKEN

UNBROKEN

4000 Post Club
#2,889
Messages
4,587
Reactions
5,362
Points
352
Location
Houston, TX, USA
#2,889
Caster said:
I haven't seen many vehicles lifted from the pinch weld without a slotted rubber block or slotted lift head on the jack (like the factory jack in with the spare tire) that doesn't bend or f'-up the pinch weld. I know this first hand.

Tire shops - Why anyone needs to do this at this pont in time is beyond me since pinch weld jack points aren't new, but, it seems more times than not, you need to school your tire shop on how to lift your vehicle with pinch welds. They F' them up A LOT. That's my own personal experience as well as quite a few other people I know. I'm sure plenty of people on here can attest to that same thing from their own tire shop experiences.
Click to expand...
A shop screwing something up doesn’t make the lift point bad. Unibody cars have been designed to lift from the pinch weld since the dawn of unibody cars almost. Done correctly no damage will occur.
 

C

Caster

Member
#2,890
Messages
262
Reactions
239
Points
37
Location
Michigan
#2,890
UNBROKEN said:
A shop screwing something up doesn’t make the lift point bad. Unibody cars have been designed to lift from the pinch weld since the dawn of unibody cars almost. Done correctly no damage will occur.
Click to expand...
Exactly my point. I'm not dissing the pinch weld, I'm dissing people not caring about, or being ignorant, with our vehicles and causing preventable damage. Adding these block should help. If it's a waste of $45, so be it. You are the king of buying un-needed stuff for your ST!! I mean that playfully and not in a Richard kind of way! You have lots of cool mods. I have a HUGE lifted F-150 with more money in the mods than the cost of the truck new. I know exactly how the modification game works!
 

C

Cruising68

1000 Post Club
#2,891
Messages
1,627
Reactions
1,185
Points
262
Location
Chicago, IL, USA
#2,891
Yes pinch weld jack points have been around forever. Unfortunately brainless techs seem to be plentiful. First trip to the dealer and they folded one of my jack points. No excuse imo for a dealer. Right after that I fixed it and bought those pinch weld plates. Every time I HAVE to use a shop I stick them to the pinch welds (magnetic) and point it out to the tech. Cheap insurance imo.


Sent from my iPad using Tapatalk
 

F

FlatSpot

New Member
#2,892
Messages
14
Reactions
26
Points
2
Location
Atlanta, GA
Vehicle
2025 Explorer ST
#2,892
My 2025 is coming along. So far I have installed the Eibach lowering springs, Steeda Front and Rear sway bars with links, Steeda strut tower brace, Thermal R&D 3" Catback, removed the luggage racks, tinted the front door windows. 20241030_150638.jpg 20241030_152128.jpg
 

BrooseDaMoose

BrooseDaMoose

Active Member
#2,893
Messages
946
Reactions
531
Points
82
Location
East Freetown, MA
Vehicle
2020 Explorer ST, Silver Spruce Metalic
#2,893
FlatSpot said:
My 2025 is coming along. So far I have installed the Eibach lowering springs, Steeda Front and Rear sway bars with links, Steeda strut tower brace, Thermal R&D 3" Catback, removed the luggage racks, tinted the front door windows. View attachment 25989 View attachment 25990
Click to expand...
Lookin’ good man!


Sent from my iPhone using Tapatalk
 

B

bcsugarhill

New Member
#2,894
Messages
3
Reactions
0
Points
1
Location
Sugar Hill
Vehicle
2025 Ford Explorer ST vapor blue
#2,894
Have any of you had your front driver/ passenger windows tinted? Just picked mine up yesterday, and I can't be sure, but I think the windows are tinted? but I can't find anything on the factory order showing those driver / passenger side front door windows being tinted... but there is one window that has a slight flaw like dust caught behind a film tint, which leads me to think its been tinted. So just curious if somebody had experience with that before? or know if the 2025's come with tinted windows on the front driver/ passenger side door?
 

M

Mako

New Member
#2,895
Messages
10
Reactions
2
Points
2
Location
Canada
Vehicle
2025 Explorer ST
#2,895
FlatSpot said:
My 2025 is coming along. So far I have installed the Eibach lowering springs, Steeda Front and Rear sway bars with links, Steeda strut tower brace, Thermal R&D 3" Catback, removed the luggage racks, tinted the front door windows. View attachment 25989 View attachment 25990
Click to expand...
Do you have spacers?
 

BrooseDaMoose

BrooseDaMoose

Active Member
#2,896
Messages
946
Reactions
531
Points
82
Location
East Freetown, MA
Vehicle
2020 Explorer ST, Silver Spruce Metalic
#2,896
Blacked out my ST emblems using The OCD Plug overlays. They fit really well. Also put on my matte black lettering on the lifgate.
Front ST.jpg
Rear ST.jpg
Liftgate Letters.jpg
 

H

hfrog355

Member
#2,898
Messages
39
Reactions
33
Points
12
Location
Louisiana
Vehicle
2023 Explorer ST
#2,898
FlatSpot said:
My 2025 is coming along. So far I have installed the Eibach lowering springs, Steeda Front and Rear sway bars with links, Steeda strut tower brace, Thermal R&D 3" Catback, removed the luggage racks, tinted the front door windows. View attachment 25989 View attachment 25990
Click to expand...
I really wish mine didn't have the roof rack. It looks so much better without it. The quotes I received to have it done are obnoxiously expensive and I don't feel that comfortable (yet?) pulling the interior apart myself.
 

F

FlatSpot

New Member
#2,899
Messages
14
Reactions
26
Points
2
Location
Atlanta, GA
Vehicle
2025 Explorer ST
#2,899
I paid the retail price for the 4 parts at my local dealer and did it myself. Took about 4 hours to complete. The first side took 2.5 hours, and other side went a little faster since I knew what to expect. It's not for the faint of heart. I use to install car stereos and alarms decades ago, so pulling trim before and having the right tools helped.
 

F

FLnative

New Member
#2,900
Messages
16
Reactions
31
Points
12
Location
FL
Vehicle
2024 Explorer ST
#2,900
Went slick top today.
PXL_20241102_215411753.jpg
 

You must log in or register to reply here.

Explorer ST Posts



Top