-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!
What Have You Done To Your Explorer ST Today
- Thread starter TNSmokee
- Start date
Depends on what type of setup you want to run. Always on, parked monitoring? You'll need to tap the fuse panel. On only when the vehicle is powered? You'll need to tap the rear view mirror. That's the easier of the two. If you want to install a rear cam you have to run the wiring through the headliner.
Just did the rubber cane tip mod on my 2020 ST blow off valve. Waiting on Black Friday to update to Hot and Cold side pipes and BOV. Hopefully there Will be a deal. Hint Hint @Lethalperformance
-
1
- Show All
I was afraid of tackling this project. Once I dove into it, I found it quite simple and a very satisfying accomplishment. I installed front and rear cameras in our ST and my wife’s EcoSport. All it takes is some fuse taps and a tool kit like this:
https://a.co/d/7xYBzYP
https://a.co/d/7xYBzYP
Yea…not really. You might think they do and the internet groups love to distort and throw out the Mag Moss Act like it gives you carte blanch to do whatever you want…but it doesn’t. Example…you swapped springs and a cv shaft goes bad. They can tie that into the entire suspension, axle shafts and rear diff all by saying you modified the suspension. They don’t have to prove it when you give them the proof.
-
1
- Show All
I watched many videos; the manufacturer (Mangoal) of the cam I bought (Amazon) even had one. It's not hard at all. The front one took me all of about 20 minutes and the rear one about 2 hours. I'm anal about hiding the wires and getting into cable to the rear hatch took the longest. Just take your time and do it yourself.
-
2
- Show All
- Messages
- 958
- Reactions
- 538
- Points
- 132
- Location
- East Freetown, MA
- Vehicle
- 2020 Explorer ST, Silver Spruce Metalic
It would be great if it were that simple, but it's not. They can tie just about any modification into a warranty denial. Once they deny it, you would end up paying more in attorney fees than you would on the actual repair! Most dealers won't give you a hassle because they want to get paid but if they decide to deny your claim, be ready to pay out of pocket.
-
1
- Show All
