-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!
Cleaning Front Grill
- Thread starter John Henry
- Start date
Always bear in mind when using a leaf blower that you are blowing unfiltered air at high pressure so anything in the way of airborne particles are being blasted into your finish.
I have seen how anal members are about their cars finish, though I should point this out.
I use an METRO Blower Dryer like this one. Warm filtered air and no water spots
Amazon.com: Metro MasterBlaster MB-3CD Industrial Dryer and Blower System - 8 hp: Automotive
I have seen how anal members are about their cars finish, though I should point this out.
I use an METRO Blower Dryer like this one. Warm filtered air and no water spots
Amazon.com: Metro MasterBlaster MB-3CD Industrial Dryer and Blower System - 8 hp: Automotive
As mentioned I use a small gas powered leaf blower to dry off the whole vehicle. You can spray the grille with a little detailer and microfiber towel each slot. (Took me 15 minutes to wax it the other day)
It's a PIA but pretty when clean. I have a Raptor style grille in my F150 and it's the same way.
It's a PIA but pretty when clean. I have a Raptor style grille in my F150 and it's the same way.
I've been using this on my front grill and rear window as well as my wheels. Before I take my speed run, I blow off the grill, rear window and the wheels and wipe down to prevent spotting. After the speed run, I just wipe down the vehicle with a microfiber towel.
I have quite a few Ryobi tools so this was a quick buy at Home Depot. It is a lot easier to handle than a full size leaf blower. I even use it to blow off the dash and driver seat area and cubby holes. Variable speed as well.
https://www.amazon.com/dp/B078TPR4LB/ref=cm_sw_r_u_apa_glt_fabc_V2HFM9EZSGE6E9N0RHXA
I have quite a few Ryobi tools so this was a quick buy at Home Depot. It is a lot easier to handle than a full size leaf blower. I even use it to blow off the dash and driver seat area and cubby holes. Variable speed as well.
https://www.amazon.com/dp/B078TPR4LB/ref=cm_sw_r_u_apa_glt_fabc_V2HFM9EZSGE6E9N0RHXA
I drive 14 miles to a small town carwash. It is the old fashion wand type car wash that is well maintained and has high pressure, lots of soap, decent temperature and a no-spot rinse. The drive on the way home dries the majority of the vehicle. I only have to spray down the rear door and bumper (with a spray bottle of soft water) and then re-wipe the rear door and bumper with a micro-fiber towel. I never even have to touch the front grill unless its time for ceramic wax. Added benefit is I like trains and I usually see one or two BNSF trains rolling by the carwash while washing the car.
I use my shop vac with the hose on the exhaust port along with a outlet reducer on the hose end to increase air velocity…. Also I don’t use the blue filter in the vacuum, I use the Filter Bag as it is used for dust pickup and filters the air very well. Works great for the grille and the tailgate to blow out water from the top of the window.
