-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!
SwagSolo’s Star White Build
- Thread starter SwagSolo
- Start date
OP
Thread Starter
#22
OP
Thread Starter
#24
Thread Starter
#24
UPR Catch Can & Drain Line
Did this over a couple of days. Started by breaking/replacing the orange connector on the clean side. Ordered the 90 degree connector with free shipping from eBay. Was drop shipped from UPR directly. Followed @F=MA’s lead and sliced the inner plastic pipe with a razor blade to remove the old fitting. Heat wasn’t getting it done. Popped in replacement and used a small hose clamp to secure. Outer foam tubing covers 90% of clamp.
2025-40 to replace orange fitting
Ordered from https://www.ebay.com/itm/264640753743
Attached can with drain line attached to work out optimal routing
Cut hose to correct length and drilled a 14mm hole in bottom plastic cover to accommodate threaded male end of drain valve.
Male thread is 1/4 inch NPT. Wasn’t able to find anything that fit well at local hardware stores. Took a shot in the dark on Amazon and orders a pair of these that work perfectly
DERNORD Cast Pipe Fitting Stainless Steel 304 Hex Locknut NPT Female (1/4 Inch) https://www.amazon.com/dp/B06WWQBKR...abc_J91N2FFP75F0G6A41C4X?_encoding=UTF8&psc=1
Threaded by hand with blue Loctite then a half turn with a wrench
Finished product
Like how drain line came together. Clean. Slight regret I didn’t spray nut black first. Might dip it.
Sent from my iPhone using Tapatalk
Did this over a couple of days. Started by breaking/replacing the orange connector on the clean side. Ordered the 90 degree connector with free shipping from eBay. Was drop shipped from UPR directly. Followed @F=MA’s lead and sliced the inner plastic pipe with a razor blade to remove the old fitting. Heat wasn’t getting it done. Popped in replacement and used a small hose clamp to secure. Outer foam tubing covers 90% of clamp.
2025-40 to replace orange fitting
Ordered from https://www.ebay.com/itm/264640753743
Attached can with drain line attached to work out optimal routing
Cut hose to correct length and drilled a 14mm hole in bottom plastic cover to accommodate threaded male end of drain valve.
Male thread is 1/4 inch NPT. Wasn’t able to find anything that fit well at local hardware stores. Took a shot in the dark on Amazon and orders a pair of these that work perfectly
DERNORD Cast Pipe Fitting Stainless Steel 304 Hex Locknut NPT Female (1/4 Inch) https://www.amazon.com/dp/B06WWQBKR...abc_J91N2FFP75F0G6A41C4X?_encoding=UTF8&psc=1
Threaded by hand with blue Loctite then a half turn with a wrench
Finished product
Like how drain line came together. Clean. Slight regret I didn’t spray nut black first. Might dip it.
Sent from my iPhone using Tapatalk
-
2
- Show All
LED license plate upgrade
Ordered these. Plug and play solution. No resistors of Forscan necessary. Light is also oriented correctly as opposed to when changing bulbs in existing housings.
These are the ones I ordered.
Everbuilt LED License Plate Light Compatible For Ford Explorer Fiesta Fusion Escape MKZ Bright White LED 2011 to 2018 Ford Explorer/Fiesta 2013 to 2018 Ford Fusion/Escape 2015-2018 Lincoln MKC https://www.amazon.com/dp/B07QDFFLN...abc_Q78KNKT2VCW3DRG4MD3Z?_encoding=UTF8&psc=1
Also had every intent of changing our turn signals and reverse lights but then this happened
. Have to get around to drilling out. Already tried to slot with dremel wheel but no dice. Feel free to recommend extraction bits you’ve used in the past
Sent from my iPhone using Tapatalk
Ordered these. Plug and play solution. No resistors of Forscan necessary. Light is also oriented correctly as opposed to when changing bulbs in existing housings.
These are the ones I ordered.
Everbuilt LED License Plate Light Compatible For Ford Explorer Fiesta Fusion Escape MKZ Bright White LED 2011 to 2018 Ford Explorer/Fiesta 2013 to 2018 Ford Fusion/Escape 2015-2018 Lincoln MKC https://www.amazon.com/dp/B07QDFFLN...abc_Q78KNKT2VCW3DRG4MD3Z?_encoding=UTF8&psc=1
Also had every intent of changing our turn signals and reverse lights but then this happened
. Have to get around to drilling out. Already tried to slot with dremel wheel but no dice. Feel free to recommend extraction bits you’ve used in the past
Sent from my iPhone using Tapatalk
OP
Thread Starter
#26
OP
Thread Starter
#29
Thread Starter
#29
Got the Ford Performance one from SupDec. 2 for $23 I think after shipping. Took about a week. Comes from Ukraine.
https://supdec.com/catalog?product_id=8332
Got the ST decals cut locally. Purchased the SVG file from Etsy for $1.82 from a vendor named YachtGraphiX
Sent from my iPhone using Tapatalk
https://supdec.com/catalog?product_id=8332
Got the ST decals cut locally. Purchased the SVG file from Etsy for $1.82 from a vendor named YachtGraphiX
Sent from my iPhone using Tapatalk
Got the redline struts fitted. Might be my favorite mod so far. Function AF
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I looked at the MTR's too but only for a few minutes. I watched the install on these up front and decided for the same things you mentioned that the holes were the least invasive of the two setups. I like the RedLine's. That said, I liked being able to drop the hood from a few inches and have it close by itself. Not possible with the RedLine's, you have to develop a feel to close it.
-
1
- Show All
OP
Thread Starter
#35
Thread Starter
#35
Been dormant for awhile with work getting back to normal but wanted to share the latest mod. Newest “stiffy diffy” (Don’t sue me, need a name for this monster) on the market. Worked with the AWESOME peeps over at AWR Racing in SoCal in helping come up with a super beefy and dare I say dope looking differential stiffening mount for the #OneBoltGang. Had a weird clicking noise that I’d hear when putting the vehicle in R from P or D from R and that’s no longer there. Launches feel a hair crisper and the slightly rough shifts I was experiencing at low speed with ZFG 91 tune in sport mode are now a thing of the past. Guessing the diff was jumping around considerably. The product is super well made and I’d highly recommend for those looking to shore up this platform weak spot. Plus it looks sexy
under there in red
. Install is super easy, no drilling required. Big shoutout to Ron Miller from Whoosh Motorsports for connecting me with AWR, appreciate you man! Order thru Ron for an exclusive introductory discount. $30 cheaper than buying direct for a limited time. Link below.
https://whoosh-motorsports.myshopif...s/awr-racing-rear-diff-mount-2020-explorer-st
Sent from my iPhone using Tapatalk
under there in red
. Install is super easy, no drilling required. Big shoutout to Ron Miller from Whoosh Motorsports for connecting me with AWR, appreciate you man! Order thru Ron for an exclusive introductory discount. $30 cheaper than buying direct for a limited time. Link below.https://whoosh-motorsports.myshopif...s/awr-racing-rear-diff-mount-2020-explorer-st
Sent from my iPhone using Tapatalk
Last edited:
-
1
- Show All
Explorer ST Posts
-
-
-
-
-
2025 Headliner Exposed at Drivers Door- Latest: 23 Explorer ST
-
-
-
