• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


I apologize if someone has already answered- Forscan codes for ST?

LokiWolf

LokiWolf

Active Member
#81
Messages
583
Reactions
320
Points
182
Location
Henrico, VA
#81
bender953 said:
Haven't seen the "Enabled Use Fog Lamps as Cornering Lamps" option before in the forscan lists.
Click to expand...
Yep, been in the drop down easy config settings for over a year.

People, stop using actual coding, use the drop downs, FAR less risk. You just reverse it if it doesn’t work.


Sent from my iPad using Tapatalk Pro
 

S

sadeen

Member
#82
Messages
358
Reactions
194
Points
37
Location
Ashburn, VA
Vehicle
2020 Explorer ST
#82
It's selectable option, here's an informative video on FORscan usage - FORScan F150 mods. New easy way with no spreadsheet! - YouTube . Fast forward to ~6 mins. to bypass connecting, etc. The option to use fogs lights as cornering lamps is shown on the screen at 13:00 minutes.
 

Swiftydrinky

Swiftydrinky

New Member
#83
Messages
23
Reactions
2
Points
2
Location
San Diego, CA, USA
#83
Road.racer said:
To turn off the enhanced engine noise, the first line in ACM (727-01-01), 6th digit is a 4, and should be set to a 0 or 9. I set mine to a 9 because I read that a 0 completely disables the dash speaker. Because the stock exhaust is so quiet, I ended up turning it back on.
Click to expand...
I can not find the ACM page/screen. I get this far and am scared to adjust something. Please advise.
 

Attachments

Swiftydrinky

Swiftydrinky

New Member
#84
Messages
23
Reactions
2
Points
2
Location
San Diego, CA, USA
#84
LokiWolf said:
Yep, been in the drop down easy config settings for over a year.

People, stop using actual coding, use the drop downs, FAR less risk. You just reverse it if it doesn’t work.


Sent from my iPad using Tapatalk Pro
Click to expand...
Can I access the FENG and ANC throught these drop downs? I can't find the ACM page only this page (see attached)
 

Attachments

B

Blown F-150

Member
#85
Messages
388
Reactions
338
Points
67
Location
Calgary, AB, Canada
#85
Swiftydrinky said:
Can I access the FENG and ANC throught these drop downs? I can't find the ACM page only this page (see attached)
Click to expand...
Which dongle are you using? I had to switch to the OBD link EX after I couldn’t connect to the ACM module with my ELM327.


Sent from my iPhone using Tapatalk
 

You must log in or register to reply here.

Explorer ST Posts



Top