-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!
Glovebox and Center armrest lights?
- Thread starter ScottZL1
- Start date
As I haven't installed these I can only assume that mine will be the same as others have indicated. I believe the vehicle's wiring harness is in place and the ordered LEDs have the wiring/connector necessary to attach to what already exists in the vehicle.
This isn't something you can take my word for at this point. Look at these closely as I haven't received or installed these parts yet. I can't guarantee they are the right pieces as they only list these parts fitting vehicles through the 2020 model year. I have read where others have plugged these in their 2021's.
Armrest LED/Harness - https://parts.ford.com/shop/en/us/wire-assy-11499427-1
Glove Box LED/Harness - https://parts.ford.com/shop/en/us/jumper-wiring-11569077-1
This isn't something you can take my word for at this point. Look at these closely as I haven't received or installed these parts yet. I can't guarantee they are the right pieces as they only list these parts fitting vehicles through the 2020 model year. I have read where others have plugged these in their 2021's.
Armrest LED/Harness - https://parts.ford.com/shop/en/us/wire-assy-11499427-1
Glove Box LED/Harness - https://parts.ford.com/shop/en/us/jumper-wiring-11569077-1
-
1
- Show All
As I said, I'm lazy and I'm betting the harness is there. The part I'm most concerned about not being there is the activator in the glove box. Might have to chase this down too. The only thing I know for a fact at this point is the holder for the LED already exists in the armrest. I'd be happy to update this once I've received the pieces.
Last edited:
Did the install for both about a month ago (my ST is 2021 model). I heavily referenced this guide, which goes into detail the glovebox light installation.
The center console light is very straightforward; the panel containing the rear HVAC controls is held on by clips. Once the panel is unclipped, the dummy plug has to be disengaged from a retaining clip, same for the harness. Below is a photo of the dummy plug disengaged from the retaining clip.
The center console light is very straightforward; the panel containing the rear HVAC controls is held on by clips. Once the panel is unclipped, the dummy plug has to be disengaged from a retaining clip, same for the harness. Below is a photo of the dummy plug disengaged from the retaining clip.
-
1
- Show All
@Cruise72 I think I understand the console light installation. I too have read the thread you have referenced with respect to the glove box light but can't quite make out the picture without the part in hand. What can you tell me about the glove box light? Is there a switch or actuator? Is it simply part of the glove box support arm?
Last edited:
Essentially there are two plugs (male and female) for the glove box wiring harness; the female plug replaces the dummy plug attached behind the glovebox, and the male plug connects to the glove box support arm, causing the light to turn on/off when opening/closing the box.
Installation makes more sense when the glove box is disassembled.
Installation makes more sense when the glove box is disassembled.
-
1
- Show All
Here are the links for both the glove box and console lights.
https://www.explorerforum.com/forums/threads/adding-oem-glove-box-light.493467/
https://www.explorerforum.com/forums/threads/center-console-light.493402/
Hope this helps.
https://www.explorerforum.com/forums/threads/adding-oem-glove-box-light.493467/
https://www.explorerforum.com/forums/threads/center-console-light.493402/
Hope this helps.
-
2
- Show All
I'm just reporting back. With parts in hand, now largely disappointed, and feeling a bit foolish, I can confidently tell you that my Xploder with a build date of 3/21 does not have either of the wiring connectors in existence to add the lights.
I'm not going to be opening up the wiring harnesses to add them. Learn from my mistakes. As was discussed earlier in this thread, don't be lazy like I was and I knew I was being lazy. Check for existing connectors before ordering the parts.
Somewhere along the line, Ford figured out the extra wiring laying around unused costs them money.
I'm not going to be opening up the wiring harnesses to add them. Learn from my mistakes. As was discussed earlier in this thread, don't be lazy like I was and I knew I was being lazy. Check for existing connectors before ordering the parts.
Somewhere along the line, Ford figured out the extra wiring laying around unused costs them money.
Last edited:
-
3
- Show All
OP
Thread Starter
#20
Thread Starter
#20
I'm just reporting back. With parts in hand, now largely disappointed, and feeling a bit foolish, I can confidently tell you that my Xploder with a build date of 3/21 does not have either of the wiring connectors in existence to add the lights.
I'm not going to be opening up the wiring harnesses to add them. Learn from my mistakes. As was discussed earlier in this thread, don't be lazy like I was and I knew I was being lazy. Check for existing connectors before ordering the parts.
Somewhere along the line, Ford figured out the extra wiring laying around unused costs them money.
I'm not going to be opening up the wiring harnesses to add them. Learn from my mistakes. As was discussed earlier in this thread, don't be lazy like I was and I knew I was being lazy. Check for existing connectors before ordering the parts.
Somewhere along the line, Ford figured out the extra wiring laying around unused costs them money.
I might try looking just to be sure. I'll report back if I find I do have the harness.
