Agreed. The small plastic covers are specific left and right. Also specific with regard to the position. So they unsnap and snap back in very easily as long as the orientation remains the same.
I removed a small retaining piece that takes torx screws. It made getting the larger plastic trim piece off and on easier. It will all be obvious. After the retainer is removed from the inside, you have to pry the front edge of the light assy outward to get the snap to release. Just use your fingers to pull the front end away or if you have fat fingers like me, use a bone tool.
You'll need a socket, 11 or 12 mm a torx driver, #25 I think.
@JohnE is right, 10 minutes per side. Just be careful to not drop the unit against the car.
I removed a small retaining piece that takes torx screws. It made getting the larger plastic trim piece off and on easier. It will all be obvious. After the retainer is removed from the inside, you have to pry the front edge of the light assy outward to get the snap to release. Just use your fingers to pull the front end away or if you have fat fingers like me, use a bone tool.
You'll need a socket, 11 or 12 mm a torx driver, #25 I think.
@JohnE is right, 10 minutes per side. Just be careful to not drop the unit against the car.
-
1
- Show All
