Wide Body Kit interest?

Did some measuring today. The only way ANY spacer is fitting IN ADDITION TO a 10.5+30 wheel is with 305/35r22 tires (a +35 wheel will give you a little more room to play with spacer width). There is a metal backing plate on the rear side (by the door) of the font fender lining that my 305/40r22s almost touch and will prevent any trimming from being done. Any more offset and they WILL touch. so I and others like me are out of the game unless going to a smaller tire size. assuming 1" bigger diameter than stock, that 1/2" in additional radius gives you a little room to play with.

I would definitely be curious what that gap looks like on others with 305s on +30s. For those with stock 21", keep this in mind. the difference in "poke" is only about 1" between you and me, but i was able to run a 1.25" spacer on my 21" without touching the fender lining due to the smaller tire diameter. so a stock street pack 21" with 1.25" spacer can actually sit FURTHER outboard than my custom forged setup due to my tire size. which ALSO means, if I size down to 305/35r22s on my current wheels, I could throw in at least a 0.25" spacer to get some more poke. this ALSO means, that someone who hasn't built wheels yet, could possibly order 22x10.5+25s

if these overfenders can actually make the wheel well opening smaller so there is less gap between the tire and the body, then moving to 305/35s would actually be a good move without sacrificing looks. @Waido can you comment on if this kit reduces the overall opening size of the fender at all, reducing tire/body gap?

View attachment 9050

Do you have a straight-on side view? Can you add a red one similar to Rapid Red to the mix?

Was a price ever discussed ? I know you can't give exact pricing but a ballpark would help with a lot of decision making among members .

Was a price ever discussed ? I know you can't give exact pricing but a ballpark would help with a lot of decision making among members .

read the first post in this thread .

Roughy 2k the mold needs to be made so we need at least 3 to 4 ppl to be interested with half down before moving forward


Sent from my iPhone using Tapatalk

Just signed up as number two. I believe waido is going to send a rendering in silver! Can’t wait.

We are working on a little change as well. I’m going to open another thread once renders are finalized and we can get a count.

Working with ppl here / Facebook / IG and ticktok. Just trying to get everyone satisfied with the look.


Sent from my iPhone using Tapatalk

We are working on a little change as well. I’m going to open another thread once renders are finalized and we can get a count.

Working with ppl here / Facebook / IG and ticktok. Just trying to get everyone satisfied with the look.


Sent from my iPhone using Tapatalk

Pe


personally I was a big fan of the rendering with the vent, added a little bit of contrast making it look less round and went more with the sharp edges of the st

We were back-and-forth on the vents the only problem I see is sometimes they can look a little fake in person


Sent from my iPhone using Tapatalk

Depends on the style of the vent .

IMHO , the fender vents are what makes a widebody look widebody .