• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Best tune for 2020 Ford Explorer ST

UNBROKEN

4000 Post Club
Messages
4,590
Reactions
5,365
Points
352
Location
Houston, TX, USA
Are there states that do no have 93 Octane? I live near Washington DC. VA, MD, & DC all have 93 Octane.

Second Question: If you can only go up, it may be safer (if traveling often) to stick with a tune for 91. But will I get more Horsepower/Torque from a 93 tune?
Plenty is states only have up to 91. Yes, you will get a little more power out of 93. As far as traveling...I just keep a couple of bottles of Boostane with me when I know I’m headed into a 91 only state.
 

Messages
111
Reactions
45
Points
27
Location
Commerce Charter Township, MI, USA
I haven't bought his tune yet, but I'm going with ZFG racing. Mostly because of his previous comment about the possibility of reducing the torque in 1st and 2nd gears if I so chose. It sounds like you, JShaffer, are interested in fine tuning your tune, and while I'm not 100% sure, it would seem to me that ZFG Racing is the tune for you.
 

Jshaffer3819

Member
U.S. Army Veteran
Messages
471
Reactions
261
Points
37
Location
Kaiserslautern, Germany
Plenty is states only have up to 91. Yes, you will get a little more power out of 93. As far as traveling...I just keep a couple of bottles of Boostane with me when I know I’m headed into a 91 only state.
Great idea. So you just pour the whole bottle of boost in when you fill up? I’m getting ready to get the Palm Beach Dyno 93 tune with the octane boost as well.


Sent from my iPhone using Tapatalk
 

Jshaffer3819

Member
U.S. Army Veteran
Messages
471
Reactions
261
Points
37
Location
Kaiserslautern, Germany
I haven't bought his tune yet, but I'm going with ZFG racing. Mostly because of his previous comment about the possibility of reducing the torque in 1st and 2nd gears if I so chose. It sounds like you, JShaffer, are interested in fine tuning your tune, and while I'm not 100% sure, it would seem to me that ZFG Racing is the tune for you.
I need to look at ZFG again. Tough choice. I liked 5Star too.


Sent from my iPhone using Tapatalk
 

Messages
220
Reactions
181
Points
37
Location
Columbus, OH, USA
Great idea. So you just pour the whole bottle of boost in when you fill up? I’m getting ready to get the Palm Beach Dyno 93 tune with the octane boost as well.


Sent from my iPhone using Tapatalk
If you're using the pro kind I think a whole bottle takes you up pretty high.

I'm tuned with livernois and I have a case of boostane and I add about 1/3-1/2 of a bottle with a fill up of 93 and by my (probably incorrect calculation) that gets me to 100ish octane.
 

Jshaffer3819

Member
U.S. Army Veteran
Messages
471
Reactions
261
Points
37
Location
Kaiserslautern, Germany
I haven't bought his tune yet, but I'm going with ZFG racing. Mostly because of his previous comment about the possibility of reducing the torque in 1st and 2nd gears if I so chose. It sounds like you, JShaffer, are interested in fine tuning your tune, and while I'm not 100% sure, it would seem to me that ZFG Racing is the tune for you.
So I guess the purpose of reducing torque in first and second gear would be to minimize wheel spin and driveshaft damage. I think I would want the torque and just control it with my foot during takeoff. Don’t plan on taking this to the dragstrip but want to smoke the Beamers when merging onto the Audubon.


Sent from my iPhone using Tapatalk
 

Nbk4t5e

Active Member
Messages
852
Reactions
555
Points
232
Location
San Antonio, TX, USA
When the time comes I’m going with ZFG. Just trying to figure out if I want E50 or just 93.


Sent from my iPhone using Tapatalk
 

Jshaffer3819

Member
U.S. Army Veteran
Messages
471
Reactions
261
Points
37
Location
Kaiserslautern, Germany
When the time comes I’m going with ZFG. Just trying to figure out if I want E50 or just 93.


Sent from my iPhone using Tapatalk
I was getting ready to place my order today with Palm Beach Dyno but going back to the drawing board. I think they all are very good but I want to make sure I find one tuner and stick with them the entire time.


Sent from my iPhone using Tapatalk
 

UNBROKEN

4000 Post Club
Messages
4,590
Reactions
5,365
Points
352
Location
Houston, TX, USA
It doesn’t take much...especially if you’re just trying to get 91 up to 93. Over mixing is just wasting it. 68B9E625-FF4B-4158-BA13-90FAC2CBA2C2.png
 

Nbk4t5e

Active Member
Messages
852
Reactions
555
Points
232
Location
San Antonio, TX, USA
There is only a few E85 gas stations around here. None of them near me.


Sent from my iPhone using Tapatalk
 

Nbk4t5e

Active Member
Messages
852
Reactions
555
Points
232
Location
San Antonio, TX, USA
I was getting ready to place my order today with Palm Beach Dyno but going back to the drawing board. I think they all are very good but I want to make sure I find one tuner and stick with them the entire time.


Sent from my iPhone using Tapatalk
Seems like ZFG customer service is on point and that says a lot.


Sent from my iPhone using Tapatalk
 

Messages
311
Reactions
550
Points
117
Location
Marinette, WI, USA
I was getting ready to place my order today with Palm Beach Dyno but going back to the drawing board. I think they all are very good but I want to make sure I find one tuner and stick with them the entire time.


Sent from my iPhone using Tapatalk
Of course I would like you to pick me, but regardless of that you should consider the device that you are going with. If you plan on doing a lot of modifications over time the n gauge is not the best advice for that. The data logging ability of the engage just isn't there, when I'm doing a custom tune on the St or pretty much any EcoBoost the customer is data logging 80 + channels of data. The most you can record with the n gauge is 25 and it is missing a lot of the important EcoBoost specific parameters. It's great for loading an off-the-shelf tune but if you want something custom the RTD or mpvi2 is the way to go.

Sent from my SM-N975U using Tapatalk
 

Nbk4t5e

Active Member
Messages
852
Reactions
555
Points
232
Location
San Antonio, TX, USA
Of course I would like you to pick me, but regardless of that you should consider the device that you are going with. If you plan on doing a lot of modifications over time the n gauge is not the best advice for that. The data logging ability of the engage just isn't there, when I'm doing a custom tune on the St or pretty much any EcoBoost the customer is data logging 80 + channels of data. The most you can record with the n gauge is 25 and it is missing a lot of the important EcoBoost specific parameters. It's great for loading an off-the-shelf tune but if you want something custom the RTD or mpvi2 is the way to go.

Sent from my SM-N975U using Tapatalk
Anything coming out to change tunes from our phones on the fly? Like a OBII Bluetooth tuner?


Sent from my iPhone using Tapatalk
 

Jshaffer3819

Member
U.S. Army Veteran
Messages
471
Reactions
261
Points
37
Location
Kaiserslautern, Germany
It doesn’t take much...especially if you’re just trying to get 91 up to 93. Over mixing is just wasting it. View attachment 1130
Nice. So many options to choose from. I think I will go with the 93 tune and add an octane boost tune.


Sent from my iPhone using Tapatalk
 

UNBROKEN

4000 Post Club
Messages
4,590
Reactions
5,365
Points
352
Location
Houston, TX, USA
Anything coming out to change tunes from our phones on the fly? Like a OBII Bluetooth tuner?


Sent from my iPhone using Tapatalk
Highly doubtful.
 

Jshaffer3819

Member
U.S. Army Veteran
Messages
471
Reactions
261
Points
37
Location
Kaiserslautern, Germany
Of course I would like you to pick me, but regardless of that you should consider the device that you are going with. If you plan on doing a lot of modifications over time the n gauge is not the best advice for that. The data logging ability of the engage just isn't there, when I'm doing a custom tune on the St or pretty much any EcoBoost the customer is data logging 80 + channels of data. The most you can record with the n gauge is 25 and it is missing a lot of the important EcoBoost specific parameters. It's great for loading an off-the-shelf tune but if you want something custom the RTD or mpvi2 is the way to go.

Sent from my SM-N975U using Tapatalk
Thanks for the info. I will check out your website shortly. I like the interaction on here as well.


Sent from my iPhone using Tapatalk
 



Top