- Messages
- 391
- Reactions
- 360
- Points
- 67
- Location
- Rancho Santa Margarita, CA, USA
- Vehicle
- 2020 Explorer ST
-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!
Mishimoto Intercooler Install Issues/Observations
- Thread starter xr4tic
- Start date
- Messages
- 391
- Reactions
- 360
- Points
- 67
- Location
- Rancho Santa Margarita, CA, USA
- Vehicle
- 2020 Explorer ST
This is a classic situation with after market performance parts from any vendor ,been through this kind of stuff modding my AMG's , sorry your going through this , I'd call company and "pitch a bitch" $1,000 head ache. It's ridiculous they couldn't even send proper instruction ,no less exact fitment.
Hey @xr4tic!
Apologies for the delayed response! Sorry to hear you're having trouble with your install, and thanks so much for bringing this to our attention - I already forwarded this over to our engineering team to look into this issue. I'll keep you guys posted as we further investigate.
Also, just as a correction to the installation instructions regarding the MAP sensor - please use the longer bolt not the shortest bolt
Definitely reach out to our customer service team and they should be able to help you out!
-Nick
Apologies for the delayed response! Sorry to hear you're having trouble with your install, and thanks so much for bringing this to our attention - I already forwarded this over to our engineering team to look into this issue. I'll keep you guys posted as we further investigate.
Also, just as a correction to the installation instructions regarding the MAP sensor - please use the longer bolt not the shortest bolt
Definitely reach out to our customer service team and they should be able to help you out!
-Nick
Hey guys!
Back with another update and we'll be diving deeper into this. To start, we understand that this part of the installation is challenging mixed with a tight fit, and variable tolerances between different vehicles doesn't make it any easier. So, to help rectify this, or at least help clarify the installation, we're bringing in a third vehicle for another test fit and to make an install video focusing on how to get through the tricky bits. I'll be sure to post up the video and updated instructions once we have them ready.
For those currently stuck on this install, something that our engineer wanted to relay was to try slotting these tabs in from the side, which may be easier than dropping them in from overhead.
I also wanted to note that these tabs are not critical to a proper installation. They were one of the primary mounting points for the OEM intercooler, but the size and weight of our's would be way too much for these. We added the tabs as more of a locator/temporary holding position while the main mounting points are snugged down. As long as the lower struts and three other mounting points are properly aligned it's not necessary to have these tabs fully inserted, and especially if it means damaging your OE radiator.
Thanks, guys, I'll be sure to keep you posted on what we find on our next test fit, and keep you posted on the latest installation info as it becomes available
-Nick
Back with another update and we'll be diving deeper into this. To start, we understand that this part of the installation is challenging mixed with a tight fit, and variable tolerances between different vehicles doesn't make it any easier. So, to help rectify this, or at least help clarify the installation, we're bringing in a third vehicle for another test fit and to make an install video focusing on how to get through the tricky bits. I'll be sure to post up the video and updated instructions once we have them ready.
For those currently stuck on this install, something that our engineer wanted to relay was to try slotting these tabs in from the side, which may be easier than dropping them in from overhead.
I also wanted to note that these tabs are not critical to a proper installation. They were one of the primary mounting points for the OEM intercooler, but the size and weight of our's would be way too much for these. We added the tabs as more of a locator/temporary holding position while the main mounting points are snugged down. As long as the lower struts and three other mounting points are properly aligned it's not necessary to have these tabs fully inserted, and especially if it means damaging your OE radiator.
Thanks, guys, I'll be sure to keep you posted on what we find on our next test fit, and keep you posted on the latest installation info as it becomes available
-Nick
-
3
- Show All
Glad I happened upon this thread. I ordered up a Mishimoto IC a week or so ago from Whoosh and now second guessing not going Whipple.
At this point I'll wait and see what the results are from Nick @Mishimoto and installation tips/vids. Thanks
At this point I'll wait and see what the results are from Nick @Mishimoto and installation tips/vids. Thanks
Hey Guys!
Just wanted to chime in here again, and make sure that you have a copy of the installation instructions!
Explorer ST Intercooler Written Installation Guide
We have our donor vehicle arriving in the shop tomorrow so we can work on the updated install guide and video. I'll keep you guys posted as those materials are finished.
-Nick
Just wanted to chime in here again, and make sure that you have a copy of the installation instructions!
Explorer ST Intercooler Written Installation Guide
We have our donor vehicle arriving in the shop tomorrow so we can work on the updated install guide and video. I'll keep you guys posted as those materials are finished.
-Nick
So, these tabs won't have any bearing on the proper fitment or performance of the intercooler. We kept these in the design as a temporary fixture while securing the other mounting points, so as long as the lower struts and upper points are properly aligned the intercooler is secure on the front of the vehicle
-Nick
-Nick
So glad to read this thread. I have the broken off tab from mine sitting on my toolbox. I did a little grinding with a dremel before I gave up. The install instruction debacle is unacceptable in my opinion. I installed mine 8/6 and did it with a YouTube video on how to install the Whipple. I just had to figure out the rest on my own. I get that the @Mishimoto engineering and customer service teams are willing to help but the majority of us are doing this on the weekend with the need to have our Explorers back on the road by Monday morning.
-
1
- Show All
Hey Guys!
Just wanted to check in and see how everyone's doing with their installs! If you haven't already, make sure that you head over to our thread since I dropped a little more insight on there for those still having trouble:
Intercooler Install Tips
We also have our update installation instructions up on our website, AND are wrapping up our installation video this week as well
Apologies that our original installation instructions weren't up to our usual standards! We always appreciate any and all feedback, and for bringing this to our attention. Glad to hear you were able to get everything installed, but please don't hesitate to reach out if you have any other questions or need to make adjustments in the future!
-Nick
Just wanted to check in and see how everyone's doing with their installs! If you haven't already, make sure that you head over to our thread since I dropped a little more insight on there for those still having trouble:
Intercooler Install Tips
We also have our update installation instructions up on our website, AND are wrapping up our installation video this week as well
Apologies that our original installation instructions weren't up to our usual standards! We always appreciate any and all feedback, and for bringing this to our attention. Glad to hear you were able to get everything installed, but please don't hesitate to reach out if you have any other questions or need to make adjustments in the future!
-Nick
Last edited:
