• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Newly designed phone mount/draggy holder

S

StayinStock

Member
#1
Messages
167
Reactions
88
Points
27
Location
Charles Town, WV, USA
#1
Figured I'd share a little project I've been working on the last few weeks. It aggravates me the lack of aftermarket solutions for a good phone holder for these cars so I decided to take matters into my own hands. I started by reverse engineering the factory nav cover on the back of the screen then added my own geometry to it to add a support. A friend mentioned while I was at it I should add in a pocket to hold the Dragy, here's what I was able to come up with. After a week of using it I have to say I'm pleased with the results. Let me know what you guys think! So far it holds the phone and the draggy great even on a hard launch. Inserts are threaded for a 1/4-20 and m5 screws (to mount a plate or MagSafe which I eventually may do, currently just using a pinch mount I had laying around).

Image 11-26-22 at 10.21 AM.JPG
DSC07436.jpg DSC07432.jpg DSC07428.jpg DSC07417.jpg
 

T

TMac

1000 Post Club
#3
Messages
1,706
Reactions
1,496
Points
262
Location
Knoxville, TN
#3
Nice- Solidworks?
 

C

Cdubya

1000 Post Club
#4
Messages
1,729
Reactions
865
Points
262
Location
NE Ohio
Vehicle
2020 Explorer ST
#4
That cover on the back of the NAV is a great idea. No one can see back there and it is definitely a more solid mounting point compared to the Pro.Fit VSM mount that I have. Sounds like a product you could market to the community if you can manage to get the cost down.
 

2020FordRaptor

2020FordRaptor

1000 Post Club
#5
Messages
1,577
Reactions
764
Points
162
Location
Nevada
Vehicle
'20 Raptor, '22 Explorer ST, '14 GT500, '03 F150
#5
StayinStock said:
Figured I'd share a little project I've been working on the last few weeks. It aggravates me the lack of aftermarket solutions for a good phone holder for these cars so I decided to take matters into my own hands. I started by reverse engineering the factory nav cover on the back of the screen then added my own geometry to it to add a support. A friend mentioned while I was at it I should add in a pocket to hold the Dragy, here's what I was able to come up with. After a week of using it I have to say I'm pleased with the results. Let me know what you guys think! So far it holds the phone and the draggy great even on a hard launch. Inserts are threaded for a 1/4-20 and m5 screws (to mount a plate or MagSafe which I eventually may do, currently just using a pinch mount I had laying around).

View attachment 15304
View attachment 15305 View attachment 15306 View attachment 15307 View attachment 15308
Click to expand...
That's awesome!
 

OP
S

StayinStock

Member
Thread Starter #6
Messages
167
Reactions
88
Points
27
Location
Charles Town, WV, USA
Thread Starter #6
TMac said:
Nice- Solidworks?
Click to expand...
OnShape, I've heard Solidworks is a great program though.

Thank you guys for kind words! I'm not sure if I'm allowed to post the link here but if anyones interested I'm planning on making a few of them. DM me for a link
 

Chamorro85

Chamorro85

Active Member
#7
Messages
535
Reactions
254
Points
52
Location
Round Lake, IL USA
Vehicle
'21 Explorer ST
#7
That is legit. Like that more than the ProClip I recently got!
 

swkim722

swkim722

New Member
#10
Messages
10
Reactions
24
Points
2
Location
California
Vehicle
2022 Explorer ST
#10
Nice
 

mycbtech

mycbtech

Member
#11
Messages
239
Reactions
146
Points
37
Location
Sacramento, CA
Vehicle
2022 ST
#11
what are you using to print these? I wouldnt think PETG could stand up to summer temps
 

Chamorro85

Chamorro85

Active Member
#12
Messages
535
Reactions
254
Points
52
Location
Round Lake, IL USA
Vehicle
'21 Explorer ST
#12
StayinStock said:
I've got about 80 hours in the design and testing, so I'd like to try and make a bit of my time/money back on it rather than release the file.
Click to expand...
Yes please, waiting for you to say you wanted to make money lol. Let us know when you've got a figure! Cyber Monday deal haha...?!
 

OP
S

StayinStock

Member
Thread Starter #13
Messages
167
Reactions
88
Points
27
Location
Charles Town, WV, USA
Thread Starter #13
mycbtech said:
what are you using to print these? I wouldnt think PETG could stand up to summer temps
Click to expand...
Carbon PETG, so far we haven't had any issues with heat. PLA could be an issue but typically PETG is pretty resilient to UV and Heat.

Chamorro85 said:
Yes please, waiting for you to say you wanted to make money lol. Let us know when you've got a figure! Cyber Monday deal haha...?!
Click to expand...
I'll DM you the link!
 

mycbtech

mycbtech

Member
#14
Messages
239
Reactions
146
Points
37
Location
Sacramento, CA
Vehicle
2022 ST
#14
StayinStock said:
Carbon PETG, so far we haven't had any issues with heat. PLA could be an issue but typically PETG is pretty resilient to UV and Heat.
Click to expand...
oohh...carbon PETG? that sound fancy. ive used a few PETG prints in the engine bay and have had ok success but not carbon. Wonder if that would hold up better. well done in the build btw.
 

OP
S

StayinStock

Member
Thread Starter #15
Messages
167
Reactions
88
Points
27
Location
Charles Town, WV, USA
Thread Starter #15
I can't really tell much difference but they say its better lol. It prints a lot messier but cleans up nice and leaves really minimal layer lines though. The final product looks really clean. Luckily the way these mount they pretty much set on top of the vent and taper down with it so very little weight is actually hanging off the mounting boss.
 

V

viking

Member
#16
Messages
203
Reactions
79
Points
27
Location
Columbus, MT, USA
Vehicle
2022 Explorer ST
#16
Saw it on FB yesterday.
Finally got around to ordering today. Nice Work (y)
 

S

scoobysportD

Member
#17
Messages
121
Reactions
35
Points
27
Location
Amsterdam
Vehicle
Ford Explorer ST PHEV MY22
#17
Design looks nice!
 

S

scoobysportD

Member
#18
Messages
121
Reactions
35
Points
27
Location
Amsterdam
Vehicle
Ford Explorer ST PHEV MY22
#18
StayinStock said:
I can't really tell much difference but they say its better lol. It prints a lot messier but cleans up nice and leaves really minimal layer lines though. The final product looks really clean. Luckily the way these mount they pretty much set on top of the vent and taper down with it so very little weight is actually hanging off the mounting boss.
Click to expand...
Would a resin print be a good alternative?

Have had mixed result with the carbon, petg prints a bit easier, prusa also has some good nylon options which i think should hold up pretty well.
 

OP
S

StayinStock

Member
Thread Starter #19
Messages
167
Reactions
88
Points
27
Location
Charles Town, WV, USA
Thread Starter #19
I've debated even doing an injection mold if there would be enough interest. Seems to have tapered off a bit already though so I think for now atleast PETG is where im going to leave it. I have no desire to get into the mess that comes with resin printing. I had one a few years ago just to play around with and it was a constant headache lol. Cool results but not worth the added mess.
 

S

scoobysportD

Member
#20
Messages
121
Reactions
35
Points
27
Location
Amsterdam
Vehicle
Ford Explorer ST PHEV MY22
#20
StayinStock said:
I've debated even doing an injection mold if there would be enough interest. Seems to have tapered off a bit already though so I think for now atleast PETG is where im going to leave it. I have no desire to get into the mess that comes with resin printing. I had one a few years ago just to play around with and it was a constant headache lol. Cool results but not worth the added mess.
Click to expand...
I actually was thinking about getting a resin printer to play with haha :p love my prusa mk3s though, but the MMU is a difficult beast to tame, let alone master... You could make a silicon mold and fill that with resin as well. A buddy of mine does it all the time, makes buttons for flight sims for boeing amongst other things with that method.
 

You must log in or register to reply here.

Explorer ST Posts



Top