• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


UNBROKEN’s Iconic Silver ST build

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #961
Messages
4,588
Reactions
5,364
Points
352
Location
Houston, TX, USA
Thread Starter #961
zdubyadubya said:
Why/how are you burning through tires so quickly? I've had my Toyos for 15k miles and they still look new...
Click to expand...
280 treadwear tires and I drive it very hard on my favorite curvy backroads.
 

C

Cruising68

1000 Post Club
#962
Messages
1,627
Reactions
1,185
Points
262
Location
Chicago, IL, USA
#962
UNBROKEN said:
280 treadwear tires and I drive it very hard on my favorite curvy backroads.
Click to expand...
Love hearing that! Wish I still lived in New England as there were some epic roads. Not so much in the Midwest


Sent from my iPhone using Tapatalk
 

H

HOODED DON

New Member
Law Enforcement
#963
Messages
12
Reactions
2
Points
2
Location
East
Vehicle
2020 ST
#963
OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #964
Messages
4,588
Reactions
5,364
Points
352
Location
Houston, TX, USA
Thread Starter #964
Yes it’s Vvivid but I don’t remember the shade. It’s also turning purple…I’ll be swapping to fully painted heads soon.
 

Last edited:
S

SmittysST

Member
Law Enforcement
#965
Messages
130
Reactions
25
Points
17
Location
SOCAL
Vehicle
2023 FORD Explorer ST
#965
What a read! Killer stuff here, thank you for sharing all your great ideas with us!! My list of stuff just got longer!!!!
 

S

sundevilfanatic

New Member
#966
Messages
1
Reactions
0
Points
1
Location
Litchfield Park, AZ
Vehicle
2020 Ford Explorer XLT
#966
UNBROKEN said:
It’s pretty easy. 4 screws on the front doors and 5 on the rear. Then the panels just pop off. The inner structure is a little more involved because you have to release the window glass to remove them but still not hard.
Click to expand...
I have recently joined the forum and greatly appreciate your entire writeup on what you have done to your ST. I am getting ready to perform a complete audio upgrade but wanted to get your feedback related to sound deadening and would like to get your feedback on the following:
  1. How difficult is it to remove the window glass retaining clips?
  2. Is it difficult to reattach the window regulator panel to the glass retaining clips?
  3. On September 5, 2020, Post #254 shows a picture where your headliner was dropped to remove the roof rails. I'm interested in applying sound deadening to the roof sheet metal. How difficult is it to remove the headliner and I also heard that it is glued to the roof structure in a few areas. How did you address that?
  4. Did you apply sound deadening to the entire floor and if so, how difficult was it to remove the center console?
Thanks for your feedback.

Leroy
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #967
Messages
4,588
Reactions
5,364
Points
352
Location
Houston, TX, USA
Thread Starter #967
Pods built and installed for the differential rear fill widebands. Hope to have the 4th amp installed tomorrow and power to everything so I can write them into the tune next week. C9B9EE5A-6DF5-4A5E-9074-83ECF022B686.jpeg 282823C4-8775-47C9-8FA0-231381C01E38.jpeg
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #968
Messages
4,588
Reactions
5,364
Points
352
Location
Houston, TX, USA
Thread Starter #968
Ok…so I always liked the idea of the wiper delete but I never liked the 40mm wide aluminum delete plug I used. I tried to work with companys in the U.K. And also Germany to have these made…one ghosted me, the other took my money, sent a part that wasn’t even close to what I ordered and then ghosted me…luckily PayPal made me whole again. So…I ordered up some black acrylic circles from my friend with a waterjet and made my own. I had to sand one down from 5.1mm thick to 4.4mm to match the glass thickness then CA glue it to the backer and after that it popped right in. All the delete plug companies use black rtv so I did the same. I like I much better than the giant aluminum plug. AD8A3060-63C4-4B17-8063-46522A075556.jpeg 6D21D5C4-4BFE-4493-8FA1-13827232C338.jpeg
 

D

Dale5403

1000 Post Club
#969
Messages
1,976
Reactions
1,991
Points
262
Location
Mondovi, WI, USA
#969
UNBROKEN said:
Ok…so I always liked the idea of the wiper delete but I never liked the 40mm wide aluminum delete plug I used. I tried to work with companys in the U.K. And also Germany to have these made…one ghosted me, the other took my money, sent a part that wasn’t even close to what I ordered and then ghosted me…luckily PayPal made me whole again. So…I ordered up some black acrylic circles from my friend with a waterjet and made my own. I had to sand one down from 5.1mm thick to 4.4mm to match the glass thickness then CA glue it to the backer and after that it popped right in. All the delete plug companies use black rtv so I did the same. I like I much better than the giant aluminum plug. View attachment 17407 View attachment 17408
Click to expand...
That looks great!
 

XGHOSTX

XGHOSTX

Member
#970
Messages
50
Reactions
54
Points
17
Location
Albany, NY, USA
Vehicle
2022 Explorer ST
#970
UNBROKEN said:
Ok…so I always liked the idea of the wiper delete but I never liked the 40mm wide aluminum delete plug I used. I tried to work with companys in the U.K. And also Germany to have these made…one ghosted me, the other took my money, sent a part that wasn’t even close to what I ordered and then ghosted me…luckily PayPal made me whole again. So…I ordered up some black acrylic circles from my friend with a waterjet and made my own. I had to sand one down from 5.1mm thick to 4.4mm to match the glass thickness then CA glue it to the backer and after that it popped right in. All the delete plug companies use black rtv so I did the same. I like I much better than the giant aluminum plug. View attachment 17407 View attachment 17408
Click to expand...
Yeah looks wayyy better than other plugs out there. Nice write up per usual.
 

2020FordRaptor

2020FordRaptor

1000 Post Club
#971
Messages
1,485
Reactions
715
Points
162
Location
Nevada
Vehicle
'20 Raptor, '22 Explorer ST, '14 GT500, '03 F150
#971
Dang looks clean!
 

STJIM

STJIM

Member
#972
Messages
308
Reactions
201
Points
37
Location
Punta Gorda, FL, USA
#972
I don’t mind my aluminum plug but that sure looks a hell of a lot better! By the way, what size tubing did you use on your exhaust tips. They also look great Jim
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #973
Messages
4,588
Reactions
5,364
Points
352
Location
Houston, TX, USA
Thread Starter #973
STJIM said:
I don’t mind my aluminum plug but that sure looks a hell of a lot better! By the way, what size tubing did you use on your exhaust tips. They also look great Jim
Click to expand...
They’re 4”.
 

LSU Tigers

LSU Tigers

New Member
#974
Messages
15
Reactions
3
Points
2
Location
Shreveport LA
Vehicle
2021 Explorer ST
#974
This is just perfection.!
Couple of questions, what does "then CA glue it to the backer " mean exactly??
What is the final size of your acrylic plug? thickness = 4.4mm OD=?
Are your plugs tapered? They appear to have a taper in the pics.
looks like an extremely tight fit, how did you seal it exactly? Around the OD?
Sorry to bombard you with all the questions, but I am obviously trying to do this, and I want it perfect just as yours is!!

Thank you in advance!
 

Last edited:
OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #975
Messages
4,588
Reactions
5,364
Points
352
Location
Houston, TX, USA
Thread Starter #975
LSU Tigers said:
This is just perfection.!
Couple of questions, what does "then CA glue it to the backer " mean exactly??
What is the final size of your acrylic plug? thickness = 4.4mm OD=?
Are your plugs tapered? They appear to have a taper in the pics.
looks like an extremely tight fit, how did you seal it exactly? Around the OD?
Sorry to bombard you with all the questions, but I am obviously trying to do this, and I want it perfect just as yours is!!

Thank you in advance!
Click to expand...
The part that passes through the glass is 23.8mm wide and I sanded it down to 4.4mm thick to match the glass. No taper.
The larger pieces in the pic are the backers…the smaller piece is glued to that. CA glue is just super glue…the stuff I keep is the consistency of water to keep tolerances close on other stuff I tinker with. It’s held in the glass with black silicone sealant…which is also a glue in this case. Take a look at the install videos from Kill All Wipers…it’ll show how to glue it in place and finish the outside.
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #976
Messages
4,588
Reactions
5,364
Points
352
Location
Houston, TX, USA
Thread Starter #976
This should be finished up and in hand I’d guess by the end of next week. Hot side turbo piping from FenFab designed to work with the AFe CAI’s. C4C1040B-B483-454A-89D5-B0C2E39850D6.jpeg
 

V

viking

Member
#977
Messages
202
Reactions
78
Points
27
Location
Columbus, MT, USA
Vehicle
2022 Explorer ST
#977
UNBROKEN said:
This should be finished up and in hand I’d guess by the end of next week. Hot side turbo piping from FenFab designed to work with the AFe CAI’s. View attachment 17422
Click to expand...
SWEET. I have one in black on order. Can't wait to get mine so I can throw in my charge pipe and IC that I've had on the shop floor for months!
 

LSU Tigers

LSU Tigers

New Member
#978
Messages
15
Reactions
3
Points
2
Location
Shreveport LA
Vehicle
2021 Explorer ST
#978
UNBROKEN said:
The part that passes through the glass is 23.8mm wide and I sanded it down to 4.4mm thick to match the glass. No taper.
The larger pieces in the pic are the backers…the smaller piece is glued to that. CA glue is just super glue…the stuff I keep is the consistency of water to keep tolerances close on other stuff I tinker with. It’s held in the glass with black silicone sealant…which is also a glue in this case. Take a look at the install videos from Kill All Wipers…it’ll show how to glue it in place and finish the outside.
Click to expand...
UNBROKEN said:
The part that passes through the glass is 23.8mm wide and I sanded it down to 4.4mm thick to match the glass. No taper.
The larger pieces in the pic are the backers…the smaller piece is glued to that. CA glue is just super glue…the stuff I keep is the consistency of water to keep tolerances close on other stuff I tinker with. It’s held in the glass with black silicone sealant…which is also a glue in this case. Take a look at the install videos from Kill All Wipers…it’ll show how to glue it in place and finish the outside.
Click to expand...
 

LSU Tigers

LSU Tigers

New Member
#979
Messages
15
Reactions
3
Points
2
Location
Shreveport LA
Vehicle
2021 Explorer ST
#979
Thank you so much!!
 

T

tjmath13

Member
#980
Messages
53
Reactions
21
Points
7
Location
Gilbert AZ
Vehicle
22 Explorer ST
#980
UNBROKEN said:
This should be finished up and in hand I’d guess by the end of next week. Hot side turbo piping from FenFab designed to work with the AFe CAI’s. View attachment 17422
Click to expand...
I assume that it will still work with the stock intake as well as with the aFe?
 

You must log in or register to reply here.

Explorer ST Posts



Top