Installed a really slick LED strip - hope you enjoy!

Toadster · Jul 13, 2023

You may want to try the 15A in #26 - you need key-on power, I’d think the transmission control module would only be powered when the ignition is on

Daamus · Jul 14, 2023

Toadster said:

I actually got it to work last night by using another 10a fuse in the #134 spot for 'Family Entertainment System'. Only thing is now it doesn't come on with remote start, only when started from inside the vehicle, I assume this is because the radio needs to be on now for it to work.

I'm so confused as to why I dont have a fuse in #21 but my headlamps are functioning just fine?

http://imgur.com/0oNLdDx

Toadster · Jul 14, 2023

glad it's working, #21 is for adaptive headlamps so maybe not an option on your car - assume when you start the car (when in the vehicle) is when they work?

would have to understand the vehicle wiring schematics a bit more, maybe tie into a marker/parking light fuse? those I believe come on during remote start

MikeHTally · Jul 14, 2023

22 is the Electric Power Steering. That should be valid.

MikeHTally · Jul 14, 2023

Toadster said:

The DRL and parking lamps are in the panel under the dash. Unless the lead for the parking lamps can be positively identified, getting to that panel may be the only way. Does anyone know a good path through the firewall?

Daamus · Jul 24, 2023

went to show my buddy the light installed and found that part of it is not functioning

only lighting up over the driver side headlight now. Has to be a bad light right? Did the TX heat kill it?

Toadster · Jul 24, 2023

very odd - send feedback to the seller, they may replace it - we've had 108-109F days here in NorCal - our strip is working fine

MikeHTally · Jul 26, 2023

Daamus said:

Does the chase not light either, or does it settle with one side out?

ARKY · Aug 13, 2023

Toadster said:

I really appreciate all the information you provided on this hood LED strip. I'm going to get one myself now and install it, all of the information you provided will make it so much easier. I noticed the blue strut brace, can you tell a difference with a new one instead of the factory installed? If so, if you don't mind me asking which one did you purchase?

Copper2020 · Aug 14, 2023

NGL that looks dope af and really looks like it belongs. Not garish or gaudy.

Toadster · Oct 16, 2023

ARKY said:

it's the steeda strut tower brace, you call them and they'll powder coat it Steeda Blue for an extra $25 - I love it! can't really tell much of a difference, the chassis already feels pretty tight from factory - I'm sure it helps if you're pretty radical with your driving though

NYPigskin · Dec 14, 2023

As per the SilverHolder website,
Can these be cut down?
You can reduce the length, but you need to use waterproof glue to cover the cut port to make the light bar waterproof.
This makes these even more attractive.
Buy them from Amazon.com: SilverHolder Car Hood Light Strip White 70 Inches Exterior Flexible Daytime LED Running Light for Cars, SUVs, Trucks : Automotive and return them if they get screwed up. Just say they didn't work. Free return shipping.

sburg1616 · Jan 19, 2024

@Toadster I recently bought the same light strip, I love it and get compliments all the time. Thank you for the write up and pictures it made my decision easy. Got a question you might be able to help out with. The strip I purchased has a blinker function, but I was unable or just too lazy to figure out how to wire the blinkers up. Any idea where I can tap into the blinker on the main wiring harness on the headlights?

https://www.amazon.com/gp/product/B0BYP3QPZX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Ljn21 · Jan 21, 2024

Has anyone got this to work and was able to leave the OEM seal in place?

Toadster · Jan 21, 2024

Ljn21 said:

I’m sure it can stay in place - just have to place the strip in front of the seal - honestly I was just doing a quick setup and ripped the seal out

Toadster · Jan 21, 2024

sburg1616 said:

@Toadster I recently bought the same light strip, I love it and get compliments all the time. Thank you for the write up and pictures it made my decision easy. Got a question you might be able to help out with. The strip I purchased has a blinker function, but I was unable or just too lazy to figure out how to wire the blinkers up. Any idea where I can tap into the blinker on the main wiring harness on the headlights?

https://www.amazon.com/gp/product/B0BYP3QPZX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Unsure of the blinker tie in - would want to tie into the turn signal flashers though

Fade2black · Jan 30, 2024

Hi,
just installed this and figured out if you undo the hood lock bracket on the hood and place a washer between the hood and the bracket I was able to latch the hood without removing the weatherstripping.

2020FordRaptor · Jan 30, 2024

Fade2black said:

Is there any noticeable abnormal spacing between body panels like a Tesla though?

Fade2black · Jan 30, 2024

2020FordRaptor said:

It looks e the same to me, didn’t notice any difference

Fade2black · Jan 31, 2024

Pic of the light and how even the hood still looks

Sign Up! To view all forums and unlock additional cool features

Installed a really slick LED strip - hope you enjoy!

Member

New Member

Member

Member

Member

New Member

Member

Member

New Member

New Member

Member

Member

New Member

New Member

Member

Member

New Member

1000 Post Club

New Member

New Member

Attachments