• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


UNBROKEN’s Iconic Silver ST build

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #241
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #241
STJIM said:
Unbroken, since you are the Guru on wheels and tires, am I going to have issues with off the rack 22x10.5 35 offsets? I’m thinking I will be in quarter or less than your beautiful wheels! Thanks. Jim
Click to expand...
Nah...they’ll be inset just shy of 1/4”. If you wanna push them out just throw some 1/4” slip on spacers behind them. I always recommend billet aluminum spacers...not the cheap cast versions.
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #242
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #242
Nbk4t5e said:
Was the stat messy?

My catch can and t stat came in and looking to do next week.
Click to expand...
Two 8mm bolts on the t-stat housing and it dropped about a quart of coolant out. I expected a lot more...gotta say it wasn’t bad at all.
 

Nbk4t5e

Nbk4t5e

Active Member
#243
Messages
852
Reactions
555
Points
232
Location
San Antonio, TX, USA
#243
UNBROKEN said:
Two 8mm bolts on the t-stat housing and it dropped about a quart of coolant out. I expected a lot more...gotta say it wasn’t bad at all.
Click to expand...
Thanks for the heads up


2020 Explorer ST - Storm Trooper Build

Borla S-Type Exhaust | SPD Downpipes | Vossen HF-5 | Michelin PSS Tires | Speeda Rear Sway | Turbosmart BOV | Rear Wiper Delete | Clear Bra | Tinted Headlights | H&R Springs | Custom Carbon Fiber Steering Wheel | Custom Front and Rear Emblems | UPR Catch Can | SPD thermostat
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #244
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #244
Misfire on cylinder 4 after the plug swap.
So I followed normal protocol...swap coils 4 and 5...misfire stayed with 4. Pulled plug...insulator is good, plug is wet...definitely not firing.
Now get THIS shit. The sensor plugged into the hose for the PCV is the EXACT SAME PLUG and they’re right next to each other. I had them all undone to make room to work and got them flipped. Learn from my mistake if you’re swapping plugs.
603FD144-E28D-4D8D-851B-CC9B3F9CBDE9.jpeg
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #245
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #245
Cleaning day means pictures must be taken. 5ADCD6F6-D25C-442B-AB80-C4C1696E1D63.jpeg
 

schaggatron

schaggatron

Member
#246
Messages
168
Reactions
64
Points
27
Location
Iowa
#246
awesome, looks smooth.

Question, did you t-stat come with a gasket? I ordered the SPD 180 t-stat and it arrived today, sans gasket. Also, how do you remove the airbox without breaking anything? ;)
 

Attachments

Last edited:
OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #247
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #247
There’s an o-ring that goes on front of it inside the housing. So basically...the guy that posted on how to do a cheap version didn’t know all the details. lol
It’s simple...you can’t miss it when you take it apart.
As for the airbox, remove the tubes, filter and top obviously. I removed the wiring harness that’s clipped to it just for more space. Then remove the 10mm stud on the back side and yank it straight up. The snorkel inlet pops out easily once you get it loose.
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #248
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #248
Yay me! Roof rail delete parts shipped today.
 

schaggatron

schaggatron

Member
#249
Messages
168
Reactions
64
Points
27
Location
Iowa
#249
UNBROKEN said:
There’s an o-ring that goes on front of it inside the housing. So basically...the guy that posted on how to do a cheap version didn’t know all the details. lol
It’s simple...you can’t miss it when you take it apart.
As for the airbox, remove the tubes, filter and top obviously. I removed the wiring harness that’s clipped to it just for more space. Then remove the 10mm stud on the back side and yank it straight up. The snorkel inlet pops out easily once you get it loose.
Click to expand...
Awesome, thank you. that 10mm nut is on super freakin' tight so I started to wonder if it was supposed to come off or not.

I'm excited to see your rail updates. :)
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #250
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #250
Bored at work...building new gauges as close to the Sport Mode gauges as I can in the OBDLink app.
63E765F9-0BD5-4950-9559-5A73D5B021BE.png
 

Last edited:
OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #251
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #251
Put together a digital page as well. Looking forward to actually connecting it to the minivan this weekend to open up the mfg specific PID’s to see if I can catch an oil pressure reading somewhere. 031785CB-DBBC-4035-9C42-BDB62597EC3C.png
 

Nbk4t5e

Nbk4t5e

Active Member
#252
Messages
852
Reactions
555
Points
232
Location
San Antonio, TX, USA
#252
Is that just on your phone?


2020 Explorer ST - Storm Trooper Build

Borla S-Type Exhaust | SPD Downpipes | Vossen HF-5 | Michelin PSS Tires | Speeda Rear Sway | Turbosmart BOV | Rear Wiper Delete | Clear Bra | Tinted Headlights | H&R Springs | Custom Carbon Fiber Steering Wheel | Custom Front and Rear Emblems | UPR Catch Can | SPD T-Stat
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #253
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #253
Yea...I decided to try this app out since I already have the OBD adapter they recommend for Forscan crap.
I tried the AutoMeter DashLink 2.0....it’s a raging piece of shit. I got it to connect maybe 5 times.
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #254
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #254
Slick top ST. 4 hours start to finish and not for the faint of heart. There’s 3 holes left on each side...I used butyl rope to smash in and seal them. And I guess this puts to bed that they will definitely work with a sunroof.
17E17752-5553-41C9-B438-7A9D3D2327CA.jpeg 9D67D40F-2117-48D6-B576-C13144A9CE44.jpeg 056FB416-09A8-405C-A1B9-A357B49B6C88.jpeg A360929D-729C-4F3C-A4BD-BF89E8A403CD.jpeg A08BE790-08A3-40FB-A28D-35098159EA1A.jpeg
 

Jshaffer3819

Jshaffer3819

Member
U.S. Army Veteran
#255
Messages
471
Reactions
261
Points
37
Location
Kaiserslautern, Germany
#255
STJIM

STJIM

Member
#256
Messages
308
Reactions
201
Points
37
Location
Punta Gorda, FL, USA
#256
UNBROKEN said:
Slick top ST. 4 hours start to finish and not for the faint of heart. There’s 3 holes left on each side...I used butyl rope to smash in and seal them. And I guess this puts to bed that they will definitely work with a sunroof.
View attachment 1929 View attachment 1930 View attachment 1931 View attachment 1932 View attachment 1933
Click to expand...
Looks great! I really want to do this but wow when I saw your headliner hanging down it scared the crap out of me. Especially since my dealer just replaced my entire headliner. Nonetheless it’s a great improvement in my eyes! Jim
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #257
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #257
Random pic. 4A43AF64-7A63-4330-8843-1466988DA7C8.jpeg
 

B

boiler662

Member
#258
Messages
166
Reactions
73
Points
27
Location
Houston, TX, USA
#258
Nice build, where in Houston are you? We picked up ours last Saturday at Tomball Ford.
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #259
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #259
boiler662 said:
Nice build, where in Houston are you? We picked up ours last Saturday at Tomball Ford.
Click to expand...
NE side...I picked this one up at Tomball Ford too.
 

OP
UNBROKEN

UNBROKEN

4000 Post Club
Thread Starter #260
Messages
4,590
Reactions
5,367
Points
352
Location
Houston, TX, USA
Thread Starter #260
Gonna do some experimenting. CC861C0E-B079-4C36-88D8-D513D309F80F.jpeg
 

You must log in or register to reply here.

Explorer ST Posts



Top