• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Starting in on the wife's ST...need some help planning a "mild" build.

Messages
4
Reactions
3
Points
2
Location
Douglassville, PA, USA
Vehicle
2020 Explorer ST, 2022 Ranger XLT
#1
After working on my 2022 Ranger for a bit, I'm about to dive into my wife's 2020 ST. There's probably a dirty joke in there somewhere...shut up, it's my wife ;). So far, the only thing I've done to it is install an AEM DryFlow filter (you have to start somewhere, right?) Since it's "hers", not "his", here's the rules I have to follow:

- Everything must be reversible (in case she decides to trade it in at some point)
- It can't void the warranty (within reason, I know some dealers nit pick)
- It has to appear stock from the outside

Essentially, she drives it around in Eco mode ALL the time (such a waste, I know). I want to give it a bit more zip and maybe have some Friday night fun at the strip. A tune is the obvious choice (I'd go for Palm Beach Dyno or ZFG), but see rule #2. I know I'm not going to get much more out of it right now given the above three rules. Instead, I'm focusing mainly on reliability and endurance. I've been poking around the 'net, and so far I have:

- Steeda rear diff support
- Steeda rear sway bar
- Steeda 160 thermostat
- Steeda intercooler
- J+L catch can
- CVF cold side charge pipe

Is there anything I'm missing here? Yes, I know FP has their warrantied "tune", but honestly, I don't think it's worth the money. It's about to roll over 36k anyways, so once it hits the 50k mark, then maybe I'll put a tune on it.

Long term, we may end up getting rid of my Ranger and get a second ST. The back of the Ranger is cramped (even with the crew cab) and as the kids get bigger, we're going to need two "family" vehicles to run around to all the places kids have to go. No mini vans...I refuse. What I really want is a Lotus Evora (ya know, the perfect family vehicle)...good luck with that, eh?
 

F=MA

Active Member
Messages
947
Reactions
625
Points
232
Location
Wichita, KS, USA
#2
Don't waste your money. Wait for the second ST that you can actually work with.
 

OP
L
Messages
4
Reactions
3
Points
2
Location
Douglassville, PA, USA
Vehicle
2020 Explorer ST, 2022 Ranger XLT
Thread Starter #3
Don't waste your money. Wait for the second ST that you can actually work with.
That's not a given at this point. If it does happen, I would take the current one and she'd get the new one. Anything done to it now would just be prep for later.
 

Cdubya

1000 Post Club
Messages
1,697
Reactions
847
Points
262
Location
NE Ohio
Vehicle
2020 Explorer ST
#4
You don't need a rear diff support kit for MY2020. I'd get the Steeda subframe bushing insert set instead though.
 

J368

Member
Messages
49
Reactions
20
Points
2
Location
Tulsa, OK
Vehicle
2023 Explorer ST
#5
After working on my 2022 Ranger for a bit, I'm about to dive into my wife's 2020 ST. There's probably a dirty joke in there somewhere...shut up, it's my wife ;). So far, the only thing I've done to it is install an AEM DryFlow filter (you have to start somewhere, right?) Since it's "hers", not "his", here's the rules I have to follow:

- Everything must be reversible (in case she decides to trade it in at some point)
- It can't void the warranty (within reason, I know some dealers nit pick)
- It has to appear stock from the outside

Essentially, she drives it around in Eco mode ALL the time (such a waste, I know). I want to give it a bit more zip and maybe have some Friday night fun at the strip. A tune is the obvious choice (I'd go for Palm Beach Dyno or ZFG), but see rule #2. I know I'm not going to get much more out of it right now given the above three rules. Instead, I'm focusing mainly on reliability and endurance. I've been poking around the 'net, and so far I have:

- Steeda rear diff support
- Steeda rear sway bar
- Steeda 160 thermostat
- Steeda intercooler
- J+L catch can
- CVF cold side charge pipe

Is there anything I'm missing here? Yes, I know FP has their warrantied "tune", but honestly, I don't think it's worth the money. It's about to roll over 36k anyways, so once it hits the 50k mark, then maybe I'll put a tune on it.

Long term, we may end up getting rid of my Ranger and get a second ST. The back of the Ranger is cramped (even with the crew cab) and as the kids get bigger, we're going to need two "family" vehicles to run around to all the places kids have to go. No mini vans...I refuse. What I really want is a Lotus Evora (ya know, the perfect family vehicle)...good luck with that, eh?

I was talking to the head parts guy at my dealership, it's a great dealership. He has a 2020 and put the FP tune on his. I had a 2020, and now a 2023. We had a long conversation about the FP tune, I was thinking about getting it. You see YouTube videos showing it does make a difference. He said he could barely notice it, and wouldn't do it again. He said it was intended for other models to bring it up to the stock performance of the ST. After that conversation I decided to pass. Take it for what it's worth.
 

2020FordRaptor

1000 Post Club
Messages
1,501
Reactions
723
Points
162
Location
Nevada
Vehicle
'20 Raptor, '22 Explorer ST, '14 GT500, '03 F150
#6
After working on my 2022 Ranger for a bit, I'm about to dive into my wife's 2020 ST. There's probably a dirty joke in there somewhere...shut up, it's my wife ;). So far, the only thing I've done to it is install an AEM DryFlow filter (you have to start somewhere, right?) Since it's "hers", not "his", here's the rules I have to follow:

- Everything must be reversible (in case she decides to trade it in at some point)
- It can't void the warranty (within reason, I know some dealers nit pick)
- It has to appear stock from the outside

Essentially, she drives it around in Eco mode ALL the time (such a waste, I know). I want to give it a bit more zip and maybe have some Friday night fun at the strip. A tune is the obvious choice (I'd go for Palm Beach Dyno or ZFG), but see rule #2. I know I'm not going to get much more out of it right now given the above three rules. Instead, I'm focusing mainly on reliability and endurance. I've been poking around the 'net, and so far I have:

- Steeda rear diff support
- Steeda rear sway bar
- Steeda 160 thermostat
- Steeda intercooler
- J+L catch can
- CVF cold side charge pipe

Is there anything I'm missing here? Yes, I know FP has their warrantied "tune", but honestly, I don't think it's worth the money. It's about to roll over 36k anyways, so once it hits the 50k mark, then maybe I'll put a tune on it.

Long term, we may end up getting rid of my Ranger and get a second ST. The back of the Ranger is cramped (even with the crew cab) and as the kids get bigger, we're going to need two "family" vehicles to run around to all the places kids have to go. No mini vans...I refuse. What I really want is a Lotus Evora (ya know, the perfect family vehicle)...good luck with that, eh?
That sounds like a great list. Only thing I would add are some nice all weather floor mats. I wouldn’t do the charge pipe though as it won’t have the power gains worth the price. The ZFG tune is the best all around tune. Since you have a 2020, you don’t really need a subframe brace since you have the subframe brace. If you are launching it a lot WITH the ZFG tune, a subframe lockout kit from FenFab and a Steeda rear brace is good for peace of mind.
 

UNBROKEN

4000 Post Club
Messages
4,592
Reactions
5,368
Points
352
Location
Houston, TX, USA
#7
I was talking to the head parts guy at my dealership, it's a great dealership. He has a 2020 and put the FP tune on his. I had a 2020, and now a 2023. We had a long conversation about the FP tune, I was thinking about getting it. You see YouTube videos showing it does make a difference. He said he could barely notice it, and wouldn't do it again. He said it was intended for other models to bring it up to the stock performance of the ST. After that conversation I decided to pass. Take it for what it's worth.
That parts guy is an idiot. Of course it adds something to an ST…it was made FOR the ST. Picking up .5-.75 in the 1/4 is common.
 

UNBROKEN

4000 Post Club
Messages
4,592
Reactions
5,368
Points
352
Location
Houston, TX, USA
#8
You don’t need the diff brace, charge pipe or the t-stat.
Do the IC and if it’s under 36k miles the Ford tune. If it’s over 36k miles the FP tune is past its warranty mileage anyway so in that case a ZFG tune would be what you want.
 

dynamix

New Member
Messages
7
Reactions
3
Points
2
Location
Weatherford, Tx
Vehicle
2020 Explorer ST
#9
You don’t need the diff brace, charge pipe or the t-stat.
Do the IC and if it’s under 36k miles the Ford tune. If it’s over 36k miles the FP tune is past its warranty mileage anyway so in that case a ZFG tune would be what you want.
Don't mean to hijack, but is there ever a time the thermostat would be recommended to do?
 



Top