• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Recall Rear Bolt Fracture?

M

MrBigglesworrth

Member
#81
Messages
102
Reactions
63
Points
27
Location
Jacksonville, FL, USA
#81
HotIce said:
It's scary you said that cause I swear my shifts feel funny to like sometimes it's hard or feels 'confused' about if it should shift or not... sometimes shifting up, down, back up all in a very short time. That's even when it's not under heavy load, just casually driving to town in eco mode or normal.
Click to expand...
Yep. Me too. 2-3 gets confused all the time. It’s annoying as ****. Something with the rear diff. I’m about to get to the bottom of it. I’ll report back when I do. I mean, them replacing the entire transmission didn’t fix it. So it has to be rear diff and it feels like it is happening in the rear.
 

S

StarWhite22

Member
U.S. Army Veteran
#82
Messages
67
Reactions
29
Points
17
Location
New York
Vehicle
2022 Ford Explorer ST
#82
Cdubya said:
What's your build date? Seems like after October 2022 they started putting in the revised bushing so no recall for those built after 10/2022
Click to expand...
My build date was February 2022. When it warms up I need to get under there and take a look at everything
 

M

Mekks082

Member
#83
Messages
85
Reactions
32
Points
17
Location
Colorado
Vehicle
2022 Explorer ST
#83
My build date is 9/21/22 and I have not been sent a recall.
 

K

Kevin_FG23

Member
#84
Messages
43
Reactions
24
Points
2
Location
Pearland, TX
Vehicle
2023 Explorer ST
#84
Mekks082 said:
My build date is 9/21/22 and I have not been sent a recall.
Click to expand...
Just look at the bushing and see if the center section appears to be "solid metal" under the washer, or if you see some "void areas". If solid, you're good to go.
 

Pyro

Pyro

New Member
U.S. Marine Veteran
Firefighter
#85
Messages
8
Reactions
5
Points
2
Location
Ontario california
Vehicle
2022 Ford Explorer ST
#85
MrBigglesworrth said:
Yep. Me too. 2-3 gets confused all the time. It’s annoying as ****. Something with the rear diff. I’m about to get to the bottom of it. I’ll report back when I do. I mean, them replacing the entire transmission didn’t fix it. So it has to be rear diff and it feels like it is happening in the rear.
Click to expand...
Mine does that weird hard shift to 3rd gear to were there is a hard delay on the shift feels like it won't shift I notice it during the initial start of the car after that it's a bit less aggressive. Even after warming up the car first too
 

powerboatr

powerboatr

Active Member
U.S. Navy Veteran
#86
Messages
547
Reactions
328
Points
82
Location
Texas
Vehicle
2023 Explorer ST
#86
so the 250 million dollar question
can we buy the 4th bolt and bushing and use the factory mounts to add the extra bolt?
 

C

Cruising68

1000 Post Club
#87
Messages
1,620
Reactions
1,181
Points
262
Location
Chicago, IL, USA
#87
powerboatr said:
so the 250 million dollar question
can we buy the 4th bolt and bushing and use the factory mounts to add the extra bolt?
Click to expand...
You can definitely replace the whole crossmember with a 4 bolt so long as you have the second hole on the diff cover. I did this a couple years ago.

As far as adding the 2nd bushing yourself, should not be a problem so long as you can get the 2nd bushing and have the 2 bolt diff cover or get one and have some mechanical skills.


Sent from my iPhone using Tapatalk
 

powerboatr

powerboatr

Active Member
U.S. Navy Veteran
#88
Messages
547
Reactions
328
Points
82
Location
Texas
Vehicle
2023 Explorer ST
#88
Cruising68 said:
You can definitely replace the whole crossmember with a 4 bolt so long as you have the second hole on the diff cover. I did this a couple years ago.

As far as adding the 2nd bushing yourself, should not be a problem so long as you can get the 2nd bushing and have the 2 bolt diff cover or get one and have some mechanical skills.


Sent from my iPhone using Tapatalk
Click to expand...
Thank you
She goes in for adaptive cruise issue 23rd.
I will get it up on a rack and eyeball it
 

D

DaveW012

Member
#89
Messages
202
Reactions
45
Points
27
Location
Derry, NH
Vehicle
2020 Explorer ST
#89
powerboatr said:
so the 250 million dollar question
can we buy the 4th bolt and bushing and use the factory mounts to add the extra bolt?
Click to expand...
You would need to cut out a hole in the subframe and weld in a sleeve that houses the bushing. Definitely not going to be a simple job.
 

C

CoHPhasor

Member
#90
Messages
297
Reactions
176
Points
37
Location
San Francisco
Vehicle
2022 ST
#90
As mentioned above - that is no-can-do.
What is missing?
- A HOLE in the subframe where the bushing sleeve goes
- a tapered bushing sleeve
- the bushing itself

For you to cut both sides of the hole and weld on both sides, you have to drop the crossmember and remove everything, which is all of the work.
If you're going to do all that work, just buy the 4 bolt Aviator crossmember and be done with it. Why screw around?
 

FORZDA3

FORZDA3

Member
U.S. Air Force Veteran
#92
Messages
489
Reactions
326
Points
67
Location
Gloucester, VA, USA
Vehicle
2021 Explorer ST
#92
powerboatr said:
I think the hole is there
Click to expand...
Bless your heart. There is simply no way to “add” another bushing/mount to a 3-bolt rear subframe. If you spend a bit of time reading the several threads on it, there is much information.
 

powerboatr

powerboatr

Active Member
U.S. Navy Veteran
#93
Messages
547
Reactions
328
Points
82
Location
Texas
Vehicle
2023 Explorer ST
#93
Guess tye aviator cross member is in the list
Has to be perfect. It's wifes car.
I get to drive it . Some
 

C

CoHPhasor

Member
#94
Messages
297
Reactions
176
Points
37
Location
San Francisco
Vehicle
2022 ST
#94
powerboatr said:
I think the hole is there
Click to expand...
You are looking in the wrong place.
Look at your first image, at the top is a black subframe (You see the bottom half of the diff).
If you look, you'll see a big circle with a bolt on the left, then the subframe is "whole" in the circular impression to the right.
(The bushing is like 2" round)
 

C

Cruising68

1000 Post Club
#95
Messages
1,620
Reactions
1,181
Points
262
Location
Chicago, IL, USA
#95
Agree you would have to pull the crossmember to fab the new bushing in. For somebody with fab skills it does not look too hard to do but like mentioned, at that point the aviator crossmember is easier albeit more expensive.


Sent from my iPhone using Tapatalk
 

You must log in or register to reply here.

Explorer ST Posts



Top