• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


ANYONE running SBfilter hot & cold side piping??

MacandCheeseST

MacandCheeseST

Member
#41
Messages
250
Reactions
127
Points
37
Location
CONNECTICUT
Vehicle
2020 EXPLORER ST
#41
UNBROKEN said:
Yea mine I can hear now but before I cut the hood I’d have to roll the window down to make sure the Turbosmart valve was even working.
Click to expand...
your ST is the hardest I’ve seen, period. That raw finish under the hood to mimic the silver paint puts you in GOAT status
 

BrooseDaMoose

BrooseDaMoose

1000 Post Club
#42
Messages
1,036
Reactions
589
Points
162
Location
East Freetown, MA
Vehicle
2020 Explorer ST, Silver Spruce Metalic
#42
Looks like I’m going to go with FenFeb hot side and cold side with the TurboSmart BOV. It’s a bit more expensive but from everything I’ve read it’s worth it. How difficult is it to install this? I know it doesn’t come with any instructions.


Sent from my iPhone using Tapatalk
 

MacandCheeseST

MacandCheeseST

Member
#43
Messages
250
Reactions
127
Points
37
Location
CONNECTICUT
Vehicle
2020 EXPLORER ST
#43
Super simple, should be able to find some YouTube videos out there
 

LuxST

LuxST

Member
#44
Messages
76
Reactions
16
Points
7
Location
South Carolina
Vehicle
2022 Explorer ST
#44
MacandCheeseST said:
Super simple, should be able to find some YouTube videos out there
Click to expand...
If you find a video, please share cause I’ve never found one for the hot side. I struggled like hell to get the piping on passenger side pipe to turbo lol Cold side was a 5 min install
 

MacandCheeseST

MacandCheeseST

Member
#45
Messages
250
Reactions
127
Points
37
Location
CONNECTICUT
Vehicle
2020 EXPLORER ST
#45
Ahhh yes the driver side turbo, that’s the first piece that needs to go on then the cai. You need to find T handle 7mm/8mm/9mm/10mm tool. Mine is from my Armma RC car.. allows you to loosen the clamps and they are very compact. I pulled off the coupling that came on turbo and secured it to charge pipe the attached to turbo.
 

LuxST

LuxST

Member
#46
Messages
76
Reactions
16
Points
7
Location
South Carolina
Vehicle
2022 Explorer ST
#46
Yeah
MacandCheeseST said:
Ahhh yes the driver side turbo, that’s the first piece that needs to go on then the cai. You need to find T handle 7mm/8mm/9mm/10mm tool. Mine is from my Armma RC car.. allows you to loosen the clamps and they are very compact. I pulled off the coupling that came on turbo and secured it to charge pipe the attached to turbo.
Click to expand...
Driver side was cake, it’s the passenger side that I didn’t get along with lol

Mac, did you get an extra clamp piece that was smaller than the rest? What did you use it for?
 

MacandCheeseST

MacandCheeseST

Member
#47
Messages
250
Reactions
127
Points
37
Location
CONNECTICUT
Vehicle
2020 EXPLORER ST
#47
Let me go look, as I’m confused now lol!! I may have got the sides mixed up
 

You must log in or register to reply here.

Explorer ST Posts



Top