• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Do I have to jack up the car to swap out the lug nuts?

Z

Ziggy

New Member
#1
Messages
22
Reactions
16
Points
2
Location
New Mexico
Vehicle
2023 Iconic Silver Ford Explorer ST
#1
Probably a stupid question, but I’ve never owned a car with lug nuts. I got the ford black lug nuts and want to swap out from the silver. Do I have to jack the car up or can I just do one at a time in a star pattern?
 

D

DaveW012

Member
#2
Messages
202
Reactions
45
Points
27
Location
Derry, NH
Vehicle
2020 Explorer ST
#2
You can do one at a time. Just make sure to torque to factory spec.
 

C

CoHPhasor

Member
#3
Messages
297
Reactions
176
Points
37
Location
San Francisco
Vehicle
2022 ST
#3
Yes, you must remove the weight of the vehicle from the lugnut holes.
The factory torque spec is 150ft-lbs.

As noted, you can do one wheel at a time.
 

FORZDA3

FORZDA3

Member
U.S. Air Force Veteran
#4
Messages
489
Reactions
326
Points
67
Location
Gloucester, VA, USA
Vehicle
2021 Explorer ST
#4
NO, you are not required to lift the weight off the wheel to change lug nuts ONE-AT-A-TIME. Even 2 or 3 wouldn’t be a real problem unless there were other damage/problems with the wheel or studs.

The ExpST and most all contemporary vehicles have hub-centric wheels where the wheel is centered on the spindle/hub via the center bore fitment. Aftermarket wheels can be a crapshoot if it isn’t listed in the fitment data for your vehicle. The nuts/studs hold the wheel laterally to the hub, but not axially.

This fact is why/how sometimes the wheel will stay stuck on the hub with all the nuts removed, especially on a vehicle allowed to sit out in the weather for a long time.

The aluminum/alloy wheels flex and expand/contract quite a bit differently than steel wheels which is also why you should retorque them after some miles of driving with full heat cycles.

Bottom line, just swap the nuts individually and all will be fine, if torqued properly.
 

OP
Z

Ziggy

New Member
Thread Starter #5
Messages
22
Reactions
16
Points
2
Location
New Mexico
Vehicle
2023 Iconic Silver Ford Explorer ST
Thread Starter #5
FORZDA3 said:
NO, you are not required to lift the weight off the wheel to change lug nuts ONE-AT-A-TIME. Even 2 or 3 wouldn’t be a real problem unless there were other damage/problems with the wheel or studs.

The ExpST and most all contemporary vehicles have hub-centric wheels where the wheel is centered on the spindle/hub via the center bore fitment. Aftermarket wheels can be a crapshoot if it isn’t listed in the fitment data for your vehicle. The nuts/studs hold the wheel laterally to the hub, but not axially.

This fact is why/how sometimes the wheel will stay stuck on the hub with all the nuts removed, especially on a vehicle allowed to sit out in the weather for a long time.

The aluminum/alloy wheels flex and expand/contract quite a bit differently than steel wheels which is also why you should retorque them after some miles of driving with full heat cycles.

Bottom line, just swap the nuts individually and all will be fine, if torqued properly.
Click to expand...
Ok. So much conflicting info. I’ll go with this. Don’t really feel like jacking the car up today. Thanks for the detailed response.
 

You must log in or register to reply here.

Explorer ST Posts



Top