• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Updated FORScan sheet for 2020+ Ford Explorer (All Trims)

BrooseDaMoose

BrooseDaMoose

1000 Post Club
#43
Messages
1,038
Reactions
591
Points
162
Location
East Freetown, MA
Vehicle
2020 Explorer ST, Silver Spruce Metalic
#43
Nightshade said:
Start up chime? Should be available in the IPC easy way module, but can double check this week for you and get in touch!
Click to expand...
I've been looking to get rid of the Start Up and Alarm On Exit, Do-do-Do, chimes but have been unsuccessful. I looked in the IPC and found several chimes but those are not there. I thought I read somewhere that they are located in the APIM so I looked there and found some chimes at 7D0-08-01 but I'm not sure if this is it. Right now the second digit is 0 which indicates all chimes are off but obviously they are not. Do you think you can look into this? I'm sure there are other who would like to turn off these chimes. Thank you!
 

FLnative

FLnative

New Member
#44
Messages
17
Reactions
32
Points
12
Location
FL
Vehicle
2024 Explorer ST
#44
BrooseDaMoose said:
I've been looking to get rid of the Start Up and Alarm On Exit, Do-do-Do, chimes but have been unsuccessful. I looked in the IPC and found several chimes but those are not there. I thought I read somewhere that they are located in the APIM so I looked there and found some chimes at 7D0-08-01 but I'm not sure if this is it. Right now the second digit is 0 which indicates all chimes are off but obviously they are not. Do you think you can look into this? I'm sure there are other who would like to turn off these chimes. Thank you!
Click to expand...
I did both of those earlier this week on my 2024 using the instructions in these two posts.
Double Horn Honk on Leaving Cabin
https://www.explorerst.org/threads/r2d2s-2022-st-kiss-build.5210/post-72450
Disable three start-up chimes
https://www.explorerst.org/threads/r2d2s-2022-st-kiss-build.5210/post-72956
 

BrooseDaMoose

BrooseDaMoose

1000 Post Club
#45
Messages
1,038
Reactions
591
Points
162
Location
East Freetown, MA
Vehicle
2020 Explorer ST, Silver Spruce Metalic
#45
FLnative said:
I did both of those earlier this week on my 2024 using the instructions in these two posts.
Double Horn Honk on Leaving Cabin
https://www.explorerst.org/threads/r2d2s-2022-st-kiss-build.5210/post-72450
Disable three start-up chimes
https://www.explorerst.org/threads/r2d2s-2022-st-kiss-build.5210/post-72956
Click to expand...
First off, thank you for posting this! However, two things: one is that the Double Honk On Leaving Cabin and the Do-do-Do chimes when you open the door with the vehicle running are different. I've already disabled the Double Honk. The second thing is in the second post. Where it says "Method" it shows only the second digit changed to a two but down below in the green and red boxes the fourth digit is changed from a three to a five. Which is correct?
 

powerboatr

powerboatr

Active Member
U.S. Navy Veteran
#46
Messages
646
Reactions
400
Points
82
Location
Texas
Vehicle
2023 Explorer ST
#46
BrooseDaMoose said:
I've been looking to get rid of the Start Up and Alarm On Exit, Do-do-Do, chimes but have been unsuccessful. I looked in the IPC and found several chimes but those are not there. I thought I read somewhere that they are located in the APIM so I looked there and found some chimes at 7D0-08-01 but I'm not sure if this is it. Right now the second digit is 0 which indicates all chimes are off but obviously they are not. Do you think you can look into this? I'm sure there are other who would like to turn off these chimes. Thank you!
Click to expand...
I can look
Yours is what year
yes the 7DO-08-01 X0 xx is correct
you did the bcm change as well 726-63-02 xxx0
however i looked at my asbuilts and they dont reflect my vehicle
my first 4 digits are 4007
which indicates power mirrors Off, , 0 which turns off the chimes on door if engine is on,
and the next line moon light mode off? ad TPMS off, which is wrong as my TPMS is ON
i need to go look or listen to what my explorer does
 

Last edited:
FLnative

FLnative

New Member
#47
Messages
17
Reactions
32
Points
12
Location
FL
Vehicle
2024 Explorer ST
#47
BrooseDaMoose said:
First off, thank you for posting this! However, two things: one is that the Double Honk On Leaving Cabin and the Do-do-Do chimes when you open the door with the vehicle running are different. I've already disabled the Double Honk. The second thing is in the second post. Where it says "Method" it shows only the second digit changed to a two but down below in the green and red boxes the fourth digit is changed from a three to a five. Which is correct?
Click to expand...
I only changed the second digit to a 2 and it updated the fourth digit after writing it. I think the fourth digit is a checksum.
 

powerboatr

powerboatr

Active Member
U.S. Navy Veteran
#48
Messages
646
Reactions
400
Points
82
Location
Texas
Vehicle
2023 Explorer ST
#48
The 3 do do do start up disabled
Shoukd also kill the door open do do do
Good catch
 

BrooseDaMoose

BrooseDaMoose

1000 Post Club
#49
Messages
1,038
Reactions
591
Points
162
Location
East Freetown, MA
Vehicle
2020 Explorer ST, Silver Spruce Metalic
#49
FLnative said:
I only changed the second digit to a 2 and it updated the fourth digit after writing it. I think the fourth digit is a checksum.
Click to expand...
Awesome! Thank you! I will give this a go today.


Sent from my iPhone using Tapatalk
 

F

fireboy2669

New Member
Firefighter
#50
Messages
13
Reactions
2
Points
2
Location
West Virginia
Vehicle
2023 Explorer ST
#50
Nightshade said:
Below is the link to the updated FORScan changes that is currently available for our 2020+ Ford Explorer and applies to all trims for those who don't have an ST. This one is for us, which helps compile all into one.

Keep in mind that the sheet will be updated by @powerboatr and @Nightshade (myself). If you're interested in something that isn't on the sheet yet, just reach out to myself or @powerboatr or comment on this thread.

LINK: https://docs.google.com/spreadsheet...ukfkgBqYkDE2w8imywaNF8VJF8/edit#gid=671029316


--DISCLAIMER; for those asking me regarding the turn signals to change from 3-clicks to let's say 5-clicks, it won't be possible. I looked into this myself and the issue is that the signal stalk on the 2020+ Explorers are using a slightly older stalk so issue isn't just software, but also hardware. So in saying this, changing the turn signals in FORScan will not be possible for the 2020+ Explorers for the unforeseeable future.
Click to expand...
Hello, Is there anyway to increase the amount of times the turn signal blinks when you just bump the lever? I know some vehicles you can change it from 3 to 5 or 7!
 

BrooseDaMoose

BrooseDaMoose

1000 Post Club
#51
Messages
1,038
Reactions
591
Points
162
Location
East Freetown, MA
Vehicle
2020 Explorer ST, Silver Spruce Metalic
#51
fireboy2669 said:
Hello, Is there anyway to increase the amount of times the turn signal blinks when you just bump the lever? I know some vehicles you can change it from 3 to 5 or 7!
Click to expand...
From what I've read, there is not an option for it.
 

OP
Nightshade

Nightshade

Member
Firefighter
Thread Starter #52
Messages
31
Reactions
66
Points
12
Location
Alberta, Canada
Vehicle
2024 Ford Explorer ST
Thread Starter #52
fireboy2669 said:
Hello, Is there anyway to increase the amount of times the turn signal blinks when you just bump the lever? I know some vehicles you can change it from 3 to 5 or 7!
Click to expand...
@BrooseDaMoose is correct. You can change it on 2025+ Explorers but for 2020-2024, you can’t. This is because the stalk being used in these models is outdated and there’s no values to change for it.

2021+ F-150s you can change the number of turn signals because of the updated stalk.
 

F

fireboy2669

New Member
Firefighter
#53
Messages
13
Reactions
2
Points
2
Location
West Virginia
Vehicle
2023 Explorer ST
#53
BrooseDaMoose said:
From what I've read, there is not an option for it.
Click to expand...
Nightshade said:
@BrooseDaMoose is correct. You can change it on 2025+ Explorers but for 2020-2024, you can’t. This is because the stalk being used in these models is outdated and there’s no values to change for it.

2021+ F-150s you can change the number of turn signals because of the updated stalk.
Click to expand...
Thank You!
 

H

hfrog355

Member
#55
Messages
42
Reactions
36
Points
12
Location
Louisiana
Vehicle
2023 Explorer ST
#55
Can someone recommend a good primer or beginner video for getting into Forscan? I've never messed with car electronics before and it makes me a little nervous.
 

BrooseDaMoose

BrooseDaMoose

1000 Post Club
#56
Messages
1,038
Reactions
591
Points
162
Location
East Freetown, MA
Vehicle
2020 Explorer ST, Silver Spruce Metalic
#56
hfrog355 said:
Can someone recommend a good primer or beginner video for getting into Forscan? I've never messed with car electronics before and it makes me a little nervous.
Click to expand...
There's some helpful links in this thread. Also, run a search using "Forscan" and you will find lot's of good information
 

You must log in or register to reply here.

Explorer ST Posts



Top