Search results for query: rim offset

Mine is a +25 offset on a 10.5" wheel with 285 tires. I'm going to run 305's next time around and I think I'll be fine.

I already told you it would. Do you read the posts at all?

I found a set of rims I like and they come in a 10" width but have a +35mm offset. With this work?

Got some new wheels and tires put on for snow season. Went with a bit more aggressive style, looking forward to see how they'll perform. 20x9 Fuel Off-Road D538 Mavericks - Zero Offset LT275/55/R20 BFGoodrich All-Terrain T/A KO2 Was some slight rubbing on the inside when full cranked, but zip...

25 is a strong offset but it’ll work on a 10” wheel. I’d probably stay with a 295 on that offset. It’s too much for a 10.5 wheel.

I looked at those as well but they have a +25mm offset. I’m not sure they would work. +30-+35 is the norm. Sent from my iPhone using Tapatalk

I was looking at this this one, any thoughts what the best tire size would work on this with H&R springs or should I go with different offset?

You're right! I didn't think about that. I like these but they are only 8.5" wide with a 35mm offset so I could only go up to a 275/50. Not sure how close to flush they would be. They weigh 34 Lbs. so that's not bad. I may need to rethink what I like for a style.

This is just me, but I very much dislike wheels that show exposed bolt heads whether they be fake or real. Cleaning each of those out with a Q-Tip just isn't my idea of a good time and they always get dirty.

Niche does okay wheels. Most of their wheels are even heavier then stock stock wheels, ask that’s why I’m not a fan of them, but they do make some good looking wheels. I like the Mazzanti.

What about Niche? Are they a good rim? I found a rim I like. It's a 20x9" with a 35mm offset. It also comes in a 20x10" with a 40mm offset. The 10 would let me run a wider tire like a 305/45 but it's a 40mm offset. Probably too much. The 9" would let me run the 285/50's comfortably.

These are pretty nice also. I believe they are ASANTI® - ABL-12 most likely 10.5x22 with +30ish offset.

No, I wasn’t talking about Velgen wheels. I was saying usually TireRack only sells OE spec wheels, which those looked like in that photo you posted.

Huh? Not that I’m getting them from there, I said I was getting Velgen wheels, but why does it defeat the purpose? They don’t look like OE wheels. They are wider than OE wheels. And, some of the colors are not OE colors. I don’t understand. [emoji848] For instance, the example I used that was...

Will fit perfectly fine. I believe stock 20” offset is somewhere around 43-44 MM I think.

Mine are 20x9.5 +33. Your choice will fit ok.

Anything from +30 to +35 will work fine. Run a search on "Wheel Offset" and you'll get some good info.

I found some wheels that I like but I want to ensure fitment. the wheels are 20" X 9" with a +34 offset. Will these fit properly?? My stock Factory wheels are 20 X 8.5. but unsure of off set!

Tire height will be fine and less likely to rub with the +35 offset vs the normal +30. They will sit roughly 1/4” further in though. Personally…I’d find a wheel they doesn’t need hub rings. If you’re spending the money to go aftermarket buy properly fitting wheels.

Thanks! Do you have an any pics of your set up? How flush did it get?