Search results

New car or new-to-you? Telling you, an OBD2 scanner is an indispensable tool for all modern cars. For Ford, I'd recommend getting the OBDLink MX+ and Forscan Lite for Android or iOS.

Yup, make sure the service manual is followed, otherwise any level is meaningless.

This is the pic Mr. Fireman posted (of his own mount?). Interestingly, it shows the new mount but instead of the "upgraded" bolt, that there is the old "SPF 10.9" bolt! Now if Ford really thought the new bolt (W720988S439) was "upgraded" would they have put that old one in there? Old bolt...

That's a no-brainer. The dealer may even refuse to touch your aftermarket brace to do the recall.

new vs old: W720988-S439 on the left.

That's unusual. Pretty sure my cig lighter powers off.

You need a Dragy or that other gps-based device. Otherwise it's meaningless.

The bolt is NOT upgraded. It's the same grade bolt, just a different manufactured one. I personally think there is no difference between the new bolt and the old--just Ford showing the NHTSA that they came to a "solution". People were pulling the old bolt out of the single rear mount and it...

Not sure what traits you are looking for. Mine is in the same vicinity as where you want it. It's a Pro-Fit mount that i installed a ball joint to and put on a magsafe charger for my iphone. It's nice for the portrait screen because it's right next to it and i can rest my hand on top of the...

I see what your saying. The hollow. metal center portion has been filled in now. Interesting...

This pic is from the first reported failure in this forum by blaster9, July 2021: Looks identical to me but to be clear, this is what they put in after the failure, which back then was probably not a revised part for the 3 bolt. Plenty of people with early MY2022's have posted pics of their...

Anyone have a picture of the revised bushing? The one Kevin posted looks like the original for the 3bolt subframe.

Install video on a 2.3L:

Yup. plenty of time. Since you have a 2020ST, you are going to want to update all the modules that have updates... maybe 14 of them? Make sure you have the time off and start early in the day. It seems to me the 2 day isn't 48hrs but 2 calendar days.

that IS the correct part. It is no longer an actuator--just an "intermediate shaft" that is connected always. This is the latest version--the previous replacement for the FADA kind of looked like the FADA but with the connector port taped over. Note that with this newest version, the old left...

This is what I used (2 sets of 2): NETAMI 2.25 inch Inlet to 4 inch... https://www.amazon.com/dp/B09Y2CDJ78?ref=ppx_pop_mob_ap_share There is the brand name etched on it but just applied some high heat black spray and it's been fine since. You'll need a short 2-to-2.25" transition pipe. I...

Yup. That video shows the second version of the "intermediate shaft" The first one just looked like the axle hub actuator or FADA but without the plug. That happened sometime in MY2021 i believe.This latest version uses a different drivers side axle, FYI.

Well, if the car was running before and now it doesn't, you would think that any missing fuses are not needed. Was the car parked awhile and you just couldn't start it because it was acting completely dead, or did it die on you and act dead thereafter?

Sounds like the previous owner did some nice things. Hopefully they took care of the front axles and catalytic converter pipe(s) and got rid of the stock flex pipes. Take some pics of underneath the car for us. And congrats!

I've ordered a mid pipe from them and there was no problem. This time I ordered a set of Eibach springs. After a few weeks with no delivery confirmation, I contact Lethal and they tell me they called Eibach and there will be stock in a week and a half. 2 weeks later... nothing. I contacted...