Search results for query: forscan

...a couple people have had thier engines blow and found them low or without oil and never got a warning. When I was making some changes with Forscan in the IPC module I noticed a setting for "Engine Oil Level Low" and it is disabled! Is this because there is another setting elsewhere that...

Maybe I posted this in the wrong place or nobody knows? There must be a solution! I'll try the Forscan thread.

All i am asking for a few with 2025s ST to do a little forscan test and evaluation it is in the area of (fake engine noise and Active noise cancellation) but in the 2025s its named propulsion noise?? anyway, if you can read this and then post back your AS built codes under the respective ACM and...

Congrats and welcome.

...run scans every so often and bring my OBDLink MX+ on trips. Sometimes I run service procedures like reseting trans adaptive tables or resetting modules that might be acting up. Not talking making config changes. No way am I flashing back to stock everytime I want to use Forscan or Forscan...

I've run into that issue, I just load the stock tune, do what I need to in forscan then put my tune back in, it's not that hard to do. It's not like I'm using forscan on a daily basis.

I have used Forscan and Forscan Lite with my ST for years and never had a problem. I recently tried connecting using Forscan Lite and encountered the following error which can occur with full version of Forscan as well if you are tuned. If you don't want to flash back to stock and then...

Look On the forscsn sheet .I update a note for 21 t 23 s with 14 speaker b. O Compare it to your as built files, for the 25 in the DSP and ACM areas I just have not had time to work the 25s yet Plus.. my dog is a 23...

I've tried Forscan to disable it on my 25' and it does not show up as an option. Neither does Driver and Passenger seat belt chimes. I also want to remove the fake exhaust noise, so I'm looking to see if that can be done as well. I was able to disable double honk leaving cabin and use front...

A new harness is under developement currently. No one has been able to get their hands on a 25 yet to re-engineer the needed harness is what I was told when spoke to company.

Right now forscan can't turn it off. But I imagine the brains will solve it, if possible Also big brother made changes in some vehicles you cannot change settings to account for larger tires to correct speedo

FYI - The OBDLink EX FORScan OBD Adapter is 20% off for a limited time on Amazon at $47.96. https://www.amazon.com/dp/B081VQVD3F

Not on a '25!

I just used Forscan to disable the auto/start stop , no dongle needed.

I've never done it, but my understanding is that if you load factory As-Built data for the AWD module in Forscan, and then write it to your new module, that should work.

myself and nightshade are managing the explorer forscan spreadsheets, i found some issues that may or may not concern many ST drivers The ST i have, has the 14 speaker B and O stereo upgrade in the technology package. i suspect most STs are equipped with the tech package. below is what i found...

...and I needed to replace the AWD module under the drivers seat. Now I need to do the PMI calibration as required by the service manual. It says basically take it to the dealership to have this done. My question is, can I do this required update/calibration using FORScan? Thank you for any help !

Alright, awesome. I had no idea. I'm going to try to play around with it this weekend. I have both but I have never used the EX. Thanks!

It’s not recommended by them but it does work. Myself and many others use it to make changes. I bought it to play with the OBDLink gauges then figured out it works with Forscan and kept it. The wired EX is probably more stable though.

And you use it via Bluetooth. Interesting so the app just connects to ForScan and you can make the changes there?