Search results for query: rim offset

Tire height will be fine and less likely to rub with the +35 offset vs the normal +30. They will sit roughly 1/4” further in though. Personally…I’d find a wheel they doesn’t need hub rings. If you’re spending the money to go aftermarket buy properly fitting wheels.

Thanks! Do you have an any pics of your set up? How flush did it get?

Yes, those wheels will fit fine. I just bought 20x10.5 TSW wheels with a +30 offset and 76.1 hub bore and no issues. Grab a set of polycarbonate hubcentric rings and you will be all set. I went with a 295/45/20 tire which keeps the diameter very close to the stock 21” tire.

Hey guys! After some research I was able to find a rim and tire setup that I like. I'm hoping that I'm right regarding the specs for my 2020 explorer ST with street pack. Will be downsizing to a 20" and then moving to a 10.5" wide rim. Hoping this setup will get me more flush than stock. The...

Looks good! What size are the tires? Have you done a before/after with dragy runs or anything? Is the ride softer now?

Lots have done this. Mine are 20x9.5 RTR Tech 5, +33 offset. Not perfectly flush but a very good fit. 9 lbs lighter than the stock 20s, so even lighter than your stock 21s.

What size wheel are you running and what offset? Which springs did you go with? Thanks.

Alright cool thank you

That should work.. The 20x9.5 RTR Tech 5 are +33 offset for comparison

I was thinking of doing this haha

Usually 285/50/20 are the norm for 20x9.5. I went bold and tried 295/45/20 and they work just make sure you have more than +20mm offset wheels or you may rub the fender if lowered. FTL on my part.. lol I am running 275/50/20 on my 20x9 Voxx Wheels

Im not sure about the wheel offset on the aviators but im curious if these would work.

I am still torn on which direction I want to go. I know I won't be lowering but I don't know if I'm going with all terrain and smaller wheels or sticking close to stock with street wheels and tires. I still trying to understand offset and how much or little I need.

Not sure if you are looking for off road or street look. I am running 275/50/20 and lowered Eibach Springs. Second picture (Front Shot) was 295/45/20 I had to remove because they rubbed due to my wheel offset was +20

Anything from +30 to +35 is ideal. Could go a little bit further out but those are what will look best.

That's right, back space! You're 100% correct! He is going to look when he goes to take pics of them. If I remember right, I need a +30 offset. The rims are 22x9.5. He's only asking $1,000 for a set of four.

What you described is called back space, the distance from the mounting surface to the inner edge of the wheel. Offset is how far the mounting surface is away from the centerline of the wheel.

Most rims have the offset and specs imprinted on the back of the head of the rim.

I'm talking to someone about buying these Asanti rims. The only problem is he doesn't know what the offset is. To get the offset, don't you place a straight edge across the back of the rim and then measure from there down to the center? This is a stock picture of what the rims look like. He is...

Thanks! I bought them through a shop out east in Canada. Surprisingly they were on sale. I was having a hard time finding the specs I wanted on a set of wheels available in Canada. Everything was either discontinued or unavailable so I bit the bullet and ordered these. Ordered them beginning...