Search results

Thanks, guess I'll try for the next batch.

I searched Etsy and could not find it.

Sorry I read the scale backwards, so I would have adjusted to a level that I was comfortable with, If it still hard shifted, I would have questioned the fluid.

According to the Service manual you are on the low side of the correct fluid level, I would recheck it exactly following the service manual instructions using Forscan or similar scan tool to check the temperature, if still low then top it off following the service manual instructions, using the...

If you have not done it already, check your tire pressures, they ship them at 40 psi. Congratulations!

Try checking the rear corners under the bumper, my parking sensor connectors were rattling, and the class 4 hitch connector. Driver side rear parking sensor under the bumper Class 4 Hitch connector under the bumper.

Have you tried using a scanner to check for trouble codes? https://forscan.org/home.html

What size tires/rims do you have?

The Steeda springs fit all trim levels https://www.steeda.com/steeda-555-8203-explorer-lowering-springs

I would like to hear it also.

Yes try to reposition it to face to same direction and at the approximate distance from the fitting, hopefully it will clear the trouble code.

Was that sensor originally closer to the 90° fitting as in this picture? Your code is a Crankcase Ventilation System Disconnected warning, I've read the sensor also has a hall effect pickup that detects when the Vent hose is moved.

This connector appears to be unseated.

Ebay? https://www.ebay.com/itm/196130289385 Remove the clips that you need then resell it?

https://parts.ford.com/shop/en/us/multi-purpose-fuse-%28fuses%29-p-lu5z14526ald?pdp=y#/sectionId:151205636

Same setup with the 3.0, step #2 only, not sure about the other steps. https://www.foexplorer.com/ford_explorer_removal_and_installation_battery_cables_2_3l_ecoboost_201kw_273ps_-1002.html

Have you tried Clocking your suspension bushings? https://www.mustang6g.com/forums/th...hose-bushings-after-lowering-your-s550.44129/

AWE 3" Exhaust just arrived, box was beat up, but the lollipop and all other parts were intact. I was worried about the tips, but they were packed in a separate foam inserted box.(y)

Anything in Forscan that could help reset the memory positions?

Maybe this will help: