Search results

The sway bar is excellent with the stock springs. I would double check with Steeda first to make sure their revised design is compatible with the stock springs. I had the rear sway bar (original design) on for a couple of weeks before I had the Steeda springs. They were on the stiffest...

It's a straight up spring swap. That said, i think maybe a couple bolts are one time use but look stout enough to reuse which is what we all do. Maybe ask them specifically what they are talking about.

Motorcraft FL 2062 off Amazon (choose option shipped and sold by Amazon.com) https://www.amazon.com/gp/product/B010QU0SPU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I am not even talking about differences in different tuners. I'm talking about differences in ZFG tunes for bone stock cars. Is there a difference? I'm not so sure. The process, like I've mentioned, implies that it's custom but there is no evidence.

Not necessarily. It is all conjecture. How much variation is there between stock vehicles nowadays? Just because the process seems more custom, doesn't mean it is. He could be running the same tune in all stock STs that he "custom" tunes and only tweak for shifting preference. No one knows...

OK thanks. Yeah, I have a few of those on the inside pieces. I do not think they are cracks either but scratches from manufacturing. One of the scratches in particular is in the exact same spot on both sides. I'm not too worried about it and certainly wouldn't pursue replacement--especially...

From the pics, I'm not even sure what crack you are talking about? I looked at my headlights and don't see anything out of the ordinary.

I personally would not be pleased with a tune that has no trans tuning or does a bad job of it. That's half the fun!

So my dealer recalibrated mine. No change. Edit: no change. they suggested it may be the lowered suspension?

It's something like an inch and a quarter lower or so. Hardly slammed.

I think that one half of the hockey puck may be too wide to clear the plastic edge by the pinch welds. You might have to shave off the outer edges but only as test fit can tell for sure. Those are certainly better the slotted pads I bought off ebay which are too soft. NICE JOB!

6/2019 build with 25k miles. gps position incorrect about 5% of the time. Otherwise no issues and very reliable. I will not be getting any extended warranty because it's been so problem free.

There is some friction but it goes in/out relatively easily. I was never in fear of it getting stuck. The MityVac appears to be top notch. Maybe send their customer service an email about your concern. Maybe they have specs on the Ford dipstick opening or have a smaller tube available...

No... slightly too small. My original extractor (different brand though) is 6L and I had to empty it and extract again, leading to some mess. I'm with you on fears of damage from the dealership. That's probably my 2nd biggest concern next to taking more time waiting at the dealer compared to DIY.

EDIT: I actually have two extractors, a German one that had too small a capacity for the ST, and the OEM Tools one I referenced above. Both have 0.25" OD dipstick tubes that fit easily.

Most auto parts stores and oil change facilities will accept used oil. I go to the Autozone near me. I've also gone to Walmart to do it too if that's where I'm going anyways, in their auto dept.

Fully synthetic oil and filter cost me about $40. It takes about 20 minutes of my time and minimal hassle doing it from above. At the dealer, I would be spending 2 hrs, including travel time. Not worth it for me. The tire rotation I do myself when I switch to and from my winter set. I've...

1.25" front, 1.5" rear. Stock 21" wheels, Steeda springs and sway bar. By handling improvement, I am talking the spacers alone.

I still have no idea why SYNC turns on if I merely open the door for 5 sec to get something in the car. Waste of power...

I have this extractor: https://www.amazon.com/gp/product/B07N7X4TP9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Had no problem doing the oil change. I put down some paper towels around the filter to catch some dribbles but otherwise it was straight forward and fast. Love that the filter...