Search results for query: forscan

My understanding is that this has not been figured out yet. Something interfering with the noise cancellation in the center speaker on one build and in another build the changes that were thought to work made no difference.

Looking to turn off the fake engine noises over speakers on the 2025 Ford Explorer St. Has anyone tested Forscan on the 2025 Explorer St yet? If yes, what adapter did you use for the connection? Thanks!

So I used the Forscan brake bleed procedure and double checked fluid levels and "believe" the lines are all free of air. Got the truck down and back on the ground with no lights on. I pulled down the street and first stop at 10 mph Check Brake System popped up followed by the BRAKE light...

...a month. Just wondering if anyone has enabled the global close for the windows on a 25? I did it on my 21 using the instructions from the forscan spreadsheet and it worked perfectly, I really loved that feature, I feel like it’s a little silly that we can only open them with the remote but...

Could air have gotten into the abs cylinder? If so I would try the forscan brake bleed procedure. There's a good video of it on YouTube.

I have the integrated as well and used the factory unit to mount to the Superforged. I reset all the dtcs which forscan is showing a bunch for abs and then ran the initial setup for the rear brakes which was an option in forscan but I'm still getting a lot of sounds coming from what I assume is...

Try to scan and clear all codes before exiting using the pedal procedure.

...hear them both screwing in and out and when I pull the brake button they engage and the rear brakes lock up correctly. I was able to use the pedal procedure to get it in to brake maintenance mode but no matter how many times I tried it would not work to exit it so that's why I used forscan.

You either aren’t actually out of brake maintenance mode, the parking brake did it reinitialize to find its new start and stop positions? otherwise check for leaks of brake fluid maybe air is getting in the lines? I used the pedal procedure to enter and exit service mode.

Well I got everything mounted yesterday and after many tries could not get the vehicle out of Brake Maintenance mode. Had to update Forscan and through the service section I was able to find and tell it to exit the maintenance mode. Now if I depress the brake pedal with the engine off I can...

...a delay of about 10 seconds, but all of a sudden the blowers for both cooled seats came on. So one of the connectors must have come loose. Forscan sees the SCME also. Don't know if I should delete this or if you want to leave it here mods, but for anyone who loses both climate controlled...

At some point my front heated/cooled Seats decided to stop working. We took a long trip and I periodically check how things are running with Forscan, and I noticed when I read the DTC's the SCME failed to read. This was new. I also got an error about the rear seat climate control, I don't recall...

...OCD Plug Infotainment Matte Screen Protector 35% Transparency Ceramic Window Tint - All windows except windshield TW3DCreations 10" screen sleeve with 20mm ball mounts FORScan: Bambi Fog Light Mode Disabled fake engine noise Powerpoint time out set to 360s Parking lamps enabled with DRL

Just curious why you went with that screen, isn't it also 8" like the OEM Explorer one?

I did a forscan change to 726-43-01, instead of x1x1 set it to x4x4, this was for testing only. This gives you full time ambers as DRL, position and turn. Only issue that I noted before changing it back was: 1. With any setting other than DRL you will not have functional turn signals on the...

Does anyone know how to reset the sun load sensor in forscan? I’m noticing my auto headlights keeps turning on and off in broad daylight. My windshield is tinted 70%.

Mine was at 95 brand new when I took delivery That was 1st thing I went to change. So it would match my truck bms strategy And it was already at 95...yes i thought at time..they must have updated the bms strategy already 7.5 volts starting is tooo low

Beg to differ. It's 80%. Easy to verify with Forscan. When set to 95%, voltage will be 14+V most of the time when running.

...Also, did they reset the BMS when you swapped batteries? Since your battery is quite new still, i would dry that. You can do it with Forscan or look up the BMS reset procedure (it's been posted here in the forum somewhere). Looking at your second post, are you saying it was on a battery...

...when it shuts down I get the Ford graphic...weird. I might have to go have it reprogrammed by Ford, since I have tried different settings in FORScan and nothing works. Thanks for your post which became the basis for my build. I also kept the vertical screen AC bezel because it actually...