Search results

Sway bar end links making noise is very common. I've had front sway bar end link issues on every Ford I've owned in the last 20 years. So replacing them won't hurt. But if the noise is happening when not moving and while turning, it's obviously the strut hats. They are the only part of the...

Looks good. Loving your tune on mine! Wish I was closer to an E85 pump to really take advantage of this motor; our whack CA 91 octane isn't letting this motor live to its full potential! Oh well, still more than enough to embarrass the 392 Snack Packs that seem to be littering my area lately.

I'm sure it was a typo. It's Caliperfexion. I knew exactly what he was talking about. Unless you want to add a weave to your brake and make them look fAbUlOuS! Ford uses a 1-time use E-head bolt for the GT350/GT500 calipers. I knew I didn't want to deal with that so got a reusable bolt...

Trans Mount Insert: I haven't heard any reviews of the Steeda one, but Travis at HSF had good things to say about the Fenfab one (same idea, not sure on durometer differences) Rear Pinion Diff Bushing: I'd skip these. There are some horror stories about these. The diff can have some movement...

I have MMR reusable socket-head cap screws instead of the factory Ford GT350 caliper bolts. I helped put a the OPRacing caliper studs on my buddy's GT350. Might got hat route in the near future!

The GT350 and GT500 calipers are 1-piece with a solid bridge so those have to come off to change the pads. It takes me 30 minutes to swap the front pads. It's not hard.

Again, that is down to the spoke design. My 20x9.5, +33 wheels clear just fine. But my RTR wheels were designed with big brake caliper clearance in mind.

I have RTR Tech 5 wheels. These are technically S550/S650 Mustang wheels with caliper clearance in mind for the design. Spokes are quite convex. Keep in mind GT350 calipers are very wide, wider than any of the other BBK's for these Explorers IIRC. So you'll definitely have to check the spoke...

Very true. I was giving a simplistic answer that 20" diameter can fit some pretty larger diameter brakes. When going with fat multi-piston calipers you have to do your research to make sure they fit with your spoke design.

You're fine with the Street Pack brakes. Even Police Interceptor rims fit over those. I have aftermarket 20s and plenty of clearance around my GT350 brakes.

I have Steeda Adjustable Rear Toe Links, Steeda Vertical Link inserts (figured try the cheap easy upgrade first, vs the available full-billet links, as I'm only running 91 so limited power), JXB Diff Bushing Inserts, Steeda Subframe Bushing Inserts. 2020 so 2-bolt, and no need for a diff brace.

Exactly what 2020FordRaptor said. The way the IDSpeed brace always the diff to still move, like it would with a 2-bolt, is the best setup on the market.

Get a CVFab intercooler, AFE Rear swap bar, ID.Speed rear diff brace, JXB Diff Bushing Inserts, upgraded diff bolt, and Steeda or Fenfab Subframe Bushing inserts. Do these mods from these brands, then see where you want to go from there. The intercooler is a bit of work so you can do that any...

Installed the Turbosmart Dual Port BOV. Compared to the same part on my 23 Raptor, it's much different. On the truck, it's snorting and sneezing all the time no matter how gentle I drive. On this Explorer I have to aggressively try to get it to make noise. Also replaced my front brake pads...

Does this mean Cobb's transbrake is available to use?

JXB Diff Bushing Inserts and Steeda/Fenfab Subframe Bushing Inserts and call it a day.

Did anyone else catch in @Franz01234 post above he used Tein dampers? I searched the PN he gave, and they aren't listed at all on Tein USA but I saw them pop up on a Japanese parts store from England, equal to $760. Tein EnduraPro Plus Shock Absorber Kit For Ford EXPLORER U625 VSALC-B1DS2 I...

Yes I know he submitted the paperwork some time ago, I didn't know if he received approval yet and could ship direct to a CA address. Hopefully we see one of Trump's EOs being to ban CARB. :mad:

I gained no additional noise with the JXB inserts (4-bolt, no diff brace). None at all. But I did notice more immediate response in the diff. I think they are a great idea for any Explorer.

ZFG or Goosetuned will get good power using 91. Obviously not E50 power but still worth it. I'm not sure if ZFG got CARB approval yet, but you can always get a COBB AP as their OTS Stage 1 tune is 50 state legal, get Goose to write you a custom 91 tune, then swap back to the 50-state Stage 1...