• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


2025 Headliner Exposed at Drivers Door

Messages
98
Reactions
108
Points
27
Location
JAX, FL
Vehicle
25 Explorer ST & 21 F150 PB
#1
Recently noticed the headliner at the driver's door showing below the door gasket. Adjusted the gasket down to cover, but it slides back up to its natural position. Dealer thinks the headliner needs to be replaced but doesn't know if it will get resolved until they replace it. Replacing the headliner doesn't seem to be a trivial process.

Has any one seen this issue before ?



1734641084252.png
 

UNBROKEN

4000 Post Club
Messages
4,637
Reactions
5,542
Points
352
Location
Houston, TX, USA
#2
It just slipped out from under the rubber. Stick your finger in there and fix it and find a real issue to worry about.
 

OP
UGADawg96
Messages
98
Reactions
108
Points
27
Location
JAX, FL
Vehicle
25 Explorer ST & 21 F150 PB
Thread Starter #3
What do you mean stick my finger in there and fix it ? It won't stay under like it is supposed to. I've messed with it, the service tech, and the shop manager at the dealer have all tried.
 

UNBROKEN

4000 Post Club
Messages
4,637
Reactions
5,542
Points
352
Location
Houston, TX, USA
#4
Smack the weather stripping. Sometimes it’s not seated all the way on the pinch weld.
 

SoySauceSoakedSaltine

Member
U.S. Air Force Veteran
Law Enforcement
Messages
42
Reactions
19
Points
2
Location
South Carolina
Vehicle
2025 Explorer ST, 2022 Charger Hellcat
#5
What do you mean stick my finger in there and fix it ? It won't stay under like it is supposed to. I've messed with it, the service tech, and the shop manager at the dealer have all tried.

Super glue/Gorilla Glue? Sucks to have a 60K car and have so much QA issues. But that's what I would do.
 

OP
UGADawg96
Messages
98
Reactions
108
Points
27
Location
JAX, FL
Vehicle
25 Explorer ST & 21 F150 PB
Thread Starter #6
Smack the weather stripping. Sometimes it’s not seated all the way on the pinch weld.
It's been removed and reseated, no change. The higher it goes, more headliner appears. Setting it lower hides it, but then it is barely on the pinchweld.
 

OP
UGADawg96
Messages
98
Reactions
108
Points
27
Location
JAX, FL
Vehicle
25 Explorer ST & 21 F150 PB
Thread Starter #7
Fully seated weather gasket exposes headliner:

1734644818616.png

Gasket has to be pulled this far down to cover the headliner:

1734644842536.png

It seems like the headliner is cut wrong or doesn't conform up to fit under gasket.
 

Messages
299
Reactions
296
Points
67
Location
Michigan
#8
It just slipped out from under the rubber. Stick your finger in there and fix it and find a real issue to worry about.
$60K + and brand new but not a real issue.. WTF. Yeah, its a F'ing issue not many, if any, would just let go.
 

UNBROKEN

4000 Post Club
Messages
4,637
Reactions
5,542
Points
352
Location
Houston, TX, USA
#9
$60K + and brand new but not a real issue.. WTF. Yeah, its a F'ing issue not many, if any, would just let go.
Blah blah blah…90% of the time it’s just a misalignment and no…not an issue. Take 30 seconds and fix it yourself and go on with your life. Looks like he might be the 10%
 

Messages
80
Reactions
34
Points
17
Location
California
Vehicle
2025 Ford Explorer ST
#10
Get some of your wife's mascara and paint it black then ya won't notice it.:p
 

Messages
1,093
Reactions
1,255
Points
262
Location
Ohio
#11
Fully seated weather gasket exposes headliner:

View attachment 27011

Gasket has to be pulled this far down to cover the headliner:

View attachment 27012

It seems like the headliner is cut wrong or doesn't conform up to fit under gasket.
Should have been pulled offline and fixed at Chicago Assembly. Another example of the lack of quality control there.
 

OP
UGADawg96
Messages
98
Reactions
108
Points
27
Location
JAX, FL
Vehicle
25 Explorer ST & 21 F150 PB
Thread Starter #12
Should have been pulled offline and fixed at Chicago Assembly. Another example of the lack of quality control there.
The dealer has already fixed misaligned body panels and other loose trim pieces. This is the last item and they've ordered a new headliner. Sucks that we didn't notice these items during test drive and/or delivery inspection. Also sucks that this was in Chicago for two plus months on QA hold and they didn't address any of these issues then. The whole QA hold thing was a joke.
 



Top