• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


23 license plate bulbs

jobsi50

New Member
Messages
2
Reactions
0
Points
1
Location
New Jersey
Vehicle
23 st
#1
So the 23 lenses are different not just release the tab on the right and they drop down like the older ones.
In the pic I release the tab on the right and that only released that side everything else is still attached and will not release any more pressure I put and feels like it’s gonna snap. Does anyone know the trick for these ?
 

Attachments

Cajun Heat

1000 Post Club
Messages
1,202
Reactions
600
Points
262
Location
Katy, TX, USA
Vehicle
2022 Explorer ST
#2
Congrats and welcome to the forum.

1709073432606.png
 

OP
J

jobsi50

New Member
Messages
2
Reactions
0
Points
1
Location
New Jersey
Vehicle
23 st
Thread Starter #3
Thank you

so when I push the clip in on the right side and it releases I than try to pull down the rest of the lens and it will not come down I put enough pressure on it where it felt like the lens was going to snap. There is something else holding the lens up but I do not see any other clips. I tried on both lenses and it’s the same. I know the older models it was just the clip on the right and it came down.
 

Cajun Heat

1000 Post Club
Messages
1,202
Reactions
600
Points
262
Location
Katy, TX, USA
Vehicle
2022 Explorer ST
#4
I can't find anything else out there on the removal, sorry. Maybe someone else with a '23 or newer will chime in.
 

Messages
2
Reactions
0
Points
1
Location
85364
Vehicle
2024 Ford Explorer
#5
Did anyone find out how to get these off?? Ran into that same problem, don't want to apply to much pressure, feel that plastic is going to crack or something.
 

BrooseDaMoose

1000 Post Club
Messages
1,117
Reactions
697
Points
162
Location
East Freetown, MA
Vehicle
2020 Explorer ST, Silver Spruce Metalic
#6
Did anyone find out how to get these off?? Ran into that same problem, don't want to apply to much pressure, feel that plastic is going to crack or something.
Welcome to the forum. If you look at the pic in post #2, you will see there is a bulge on the opposite side of the release. Once you push in the tab and release it, you have to pull that side all the way out and the other side is free.
 

Messages
2
Reactions
0
Points
1
Location
85364
Vehicle
2024 Ford Explorer
#7
Welcome to the forum. If you look at the pic in post #2, you will see there is a bulge on the opposite side of the release. Once you push in the tab and release it, you have to pull that side all the way out and the other side is free.

Thank you, appreciate it, got it done, here's a few pictures i took. For anyone looking to do this, i just used a flat head screwdriver. Ill leave a link to the ones I purchased. They light up so nice .

Generic Leesoot 2 Pcs Error Free Xenon White LED License Plate Light Compatible with 2009-2018 Ford Explorer Fiesta Fusion Escape Focus Mondeo Lincoln MKC Rear License Tag Lights Lamp BB5Z-13550-A https://a.co/d/7wZo65a
 

Attachments



Top