Bora Spacer Questions

[singingwhodat]

Hi Everyone, I’m looking to order the 1.25” Bora Spacers for my 21’ ST with the OEM 21’ wheels and tires. Has anyone went this route to prevent from having to cut the front studs? Or do I need to go with the 1” fronts and 1.25” rears? Any experiences would be greatly appreciated.


Sent from my iPhone using Tapatalk Pro

 

[Cdubya]

1.25" all around is a good choice. Plenty have done so. A little bit of wheel poke in front, but that's OK. If you want the rears to then match the front, you could do 1.25" front, 1.5" rear. This is what I have and is also what plenty of people have done. They stick out a little with OEM 21" rims but not bad. Handling improvement is noticeable.

 

[Blaster7Romeo]

1.25" all around is a good choice. Plenty have done so. A little bit of wheel poke in front, but that's OK. If you want the rears to then match the front, you could do 1.25" front, 1.5" rear. This is what I have and is also what plenty of people have done. They stick out a little with OEM 21" rims but not bad. Handling improvement is noticeable.

Any pics of your set up?

 

[Ford Guy]

Yeah do you have pics by chance? Im curious to see what 1.25 in the front and 1.5 in the back looks like. Tks.

 

[Cdubya]

F:1.25" R:1.5", stock 21" rims

Front looking down


Rear looking down.


View from rear


Front


Rears

 

[Ford Guy]

F:1.25" R:1.5", stock 21" rims

Front looking down
View attachment 10203

Rear looking down.
View attachment 10204

View from rear
View attachment 10205

Front
View attachment 10206

Rears
View attachment 10207

Thanks a bunch. That setup looks really good. Not too much on the front and just enough on rear.

 

[singingwhodat]

Anyone have the installation instructions?


Sent from my iPhone using Tapatalk Pro

 

[Ford Guy]

Just to confirm, if you put 1.25" Bora wheel spacers on the rear you dont have to cut anything correct?
What if you do 1.5" on the rear? Does this require and shaving?
Tks.

 

[Ford Guy]

1.25" all around is a good choice. Plenty have done so. A little bit of wheel poke in front, but that's OK. If you want the rears to then match the front, you could do 1.25" front, 1.5" rear. This is what I have and is also what plenty of people have done. They stick out a little with OEM 21" rims but not bad. Handling improvement is noticeable.

Do you get any wheel rub with this setup?
I want to purchase them but just want to be sure first.
I'm thinking to do stock front and 1.5" rear spacers.
Anyone do this setup yet?
These are $63.25 per spacer online
Anyone find them cheaper?

 

[Cdubya]

Do you get any wheel rub with this setup?
I want to purchase them but just want to be sure first.
I'm thinking to do stock front and 1.5" rear spacers.
Anyone do this setup yet?
These are $63.25 per spacer online
Anyone find them cheaper?

No rub. I'm on Steeda springs. The Bora's aren't cheap. You can certainly find a bunch of Ford-spec generic spacers from China for much cheaper, but I didn't want to risk it!