Did the Lincoln screen swap

[ConspicuousConsumption]

Correct, the bezel is beefy as hell. BUT, the screen seems much bigger to me.

 

[HoneyBadgerST]

For anyone withany problems with android auto after the swap, I was able to fix my initilazation problem tonight by clearing the data and cache of the android auto app on my phone. Seems it was causing a problem for the sync system with the new layout.

 

[Mikes 22St]

That black is the bezel around the screen. It's physically the same screen as the 10" vertical, so has the same amount of wasted screen around it.

OK, thanks so that 1 inch or so that is black on the screen is black on all of them ??

 

[ConspicuousConsumption]

OK, thanks so that 1 inch or so that is black on the screen is black on all of them ??

yup, such is life. But I fully think this upgrade is worth it.

 

[ConspicuousConsumption]

I made the mount for mine out of 1/2" aluminum stock, swapped in the 8" vent trim and cut the original shroud to fit. One of the guys who does 3D printing is working on trim for the bottom, it will look pretty good when done. Saved me from ordering a 25 just for the infotainment system that I hated so much. It's a night and day difference. I did get the screen and 8" trim from eBay.

any chance you can tell me the length of the top mount that you cut?

 

[UNBROKEN]

I haven't seen anyone mention the Lincoln color theme on some of the numbers along the top. I suppose there's no way to have those the white instead of tan?

 

[Mikes 22St]

I haven't seen anyone mention the Lincoln color theme on some of the numbers along the top. I suppose there's no way to have those the white instead of tan?

View attachment 28520

Unbroken, Is this befor you put the 2 screens together ? I'm guessin yes!I see it shows the temp settings on the top ,any idea if it will show it when u have the part down by the adjustments that doesnt have the temps on it ? It looks like you just keep the vents that were there. Is it a pain to get to the wheels or room behind. Did you look into changing the vents and what the cost was ??

 

[UNBROKEN]

That’s the finished install with both housings blended together. I went to the 8” vent bezel and there’s no issues accessing anything at all. Cost I don’t remember.

 

[Mikes 22St]

That’s the finished install with both housings blended together. I went to the 8” vent bezel and there’s no issues accessing anything at all. Cost I don’t remember.

Thanks, I got a new aviator screen and the mounting and trim pieces. So now trying to figure out what else I would need? Other then the 8inch vents do you know of anything else I would need ?? I have the back piece on the screen so dont need that either .. TIA for any help !

 

[UNBROKEN]

Thanks, I got a new aviator screen and the mounting and trim pieces. So now trying to figure out what else I would need? Other then the 8inch vents do you know of anything else I would need ?? I have the back piece on the screen so dont need that either .. TIA for any help !

I’d read through these threads. There’s plenty of posts about parts needed but you’ll need the tray and insert to go with the 8” bezel.