Display Gear Number in D mode?

[SDFlyer1]

Hello from new ST owner.

Question?

On my F-150"s I could display the number while in Drive mode, kinda liked to see the number.

Wondering if I can see with ST, it does display for a couple seconds if I touch the paddles but disappears on next shift.

S.

 

[StayinStock]

I believe with a tune from either PBD or ZFG this becomes available. Not sure if its something you can turn on through ForSCAN or not but if it is I haven't found it yet.

 

[SDFlyer1]

I believe with a tune from either PBD or ZFG this becomes available. Not sure if its something you can turn on through ForSCAN or not but if it is I haven't found it yet.

Thanks, it was easy on the F150, not so much with the ST.

 

[BillBeau]

Thats the one thing I miss is the gear display. I do know if you hit the up paddle it will show you what gear your in. It blinks the number at the bottom center of your dash display.

 

[SDFlyer1]

Thats the one thing I miss is the gear display. I do know if you hit the up paddle it will show you what gear your in. It blinks the number at the bottom center of your dash display.

Ya, it does but sadly only for a few moments, I wish it would display like my 150"s, oh well.

 

[I Bleed Ford Blue]

5 Star also enables the gear display with their tunes.

 

[F=MA]

I have the gear number displayed all the time with the ZFG tune.

 

[KegsBdry]

I believe with a tune from either PBD or ZFG this becomes available. Not sure if its something you can turn on through ForSCAN or not but if it is I haven't found it yet.

Too bad that's not something that can be turned on with ForSCAN. If anyone ever finds it, please share.

 

[BabsST38]

Too bad that's not something that can be turned on with ForSCAN. If anyone ever finds it, please share.

If someone could read the “AS BUILT format” after tuning we may be able to figure out.

 

[JRV1631]

I know this can’t be done through FORScan. I’ve heard tuners using an HP tuner can do it. I work with a tuner who tuned my other Ford. He’s willing to give it a shot if I can get more info. Anybody know what/where the setting is that needs to be changed?

 

[UNBROKEN]

If your tuner doesn’t know that…perhaps it’s time for a new tuner that actually understands this car.

 

[JRV1631]

If your tuner doesn’t know that…perhaps it’s time for a new tuner that actually understands this car.

He’s a Mustang tuner. He’s just trying to help a customer.

 

[UNBROKEN]

He’s a Mustang tuner. He’s just trying to help a customer.

I would advise using someone well versed in the ST.

 

[JRV1631]

I would advise using someone well versed in the ST.

Thank you for that very “helpful” response…..db

 

[UNBROKEN]

Good luck then…if you can’t take some friendly advice without resorting to childish bullshit enjoy whatever trash tuning you wind up with. If you think you’re the first that thought “my buddy” can do it better you’re sorely mistaken. There’s several idiosyncrasies with this car that the top tuners have spent years refining…your guy isn’t one of them.

 

[JRV1631]

LOL

 

[WFO-TSi]

Have your tuner go to the "General" tab under Transmision. Open the "Gear Display Active" table and make it look like the attached picture. Then find a new tuner.