Help with PCV Hose

[rad_rob]

So I am putting the stock intake back on, and I need to replace the PCV hose that runs to the crankcase.

According to all the parts websites, the part number is coming up as L1MZ-6758-D, and when I find the part, it appears to have a sensor on the hose. The stock hose I removed does not have a sensor on it. Can anyone confirm the correct part number or point me in the right direction?

I installed a Fenfab intake and when removing my stock hose I had the one time use clips so I had to break them to remove them. I purchased the reusable clip and installed it when I did the intake but now that I’m trying to put the stock intake back on, I’m just looking to replace that hose.

Any help would be greatly appreciated, thanks!

 

[rad_rob]

Found part number L1ME-6758-JA on the hose after going through some pics but I can’t seem to find any info on it. The one that comes up whenever I search parts website it’s L1ME-6758-D but that’s the one that appears to have the sensor.

Hopefully someone who knows can help or I may just try swinging by my dealer and see what they can find.

 

[DuncanS]

Very late to the thread, but had to replace this recently. For anyone in the future, the number above is the engineering number, the part number to order is (L1MZ-6758-G).

Although long-term I'm looking to replace it with something with an actual release or quick connect.

 

[GearHead_1]

I ran into this on a 22' Edge. I caught myself before pulling it off. I'm told these fittings are showing up on many vehicles. These run about $15.

 

[DuncanS]

If anyone has any replacements with a quick release or an actual removable connection, let me know.

 

[LuxST]

If anyone has any replacements with a quick release or an actual removable connection, let me know.

im looking for one with a quick connect too. The hose fitting that came with AFE intake did not fit so had to rig it up lol