I need ForScan help.

[Cheford1]

Hey y'all,

SO...ive started dabbling in Forscan. Getting pretty good at it. But i have a few things i can't figure out and hopefully someone can help.

1) I got the Amber signals up front to turn on for a DRL BUT i can't get the white strip to shut off.....I go into as built and change 726-42-01 to 0404 the strip goes away but comes back.....can't figure out how to make it stay off though i thought changing that parameter did that (as per R2D2s info). Would ford have hard coded something to prevent just the ambers on to avoid "police impersonation"???

2) How do i make the amber lights stay on while parked??

 

[st8]

Pretty sure you can’t have only amber. It’s either just the stock white drls or that added to the amber color.

 

[Cheford1]

No you can have just ambers on as a drl (daytime only and while in drive)

 

[Cdubya]

Not sure why yours is temporary. The two line changes worked for me. Did you happen to change something else in BCM related to the headlights?

 

[Cheford1]

Put my ambers as drl, Bambi mode, fogs with drl and that’s it. Going to rescan this weekend or tonight and go with the settings a member provided me with.

 

[Cheford1]

Not sure why yours is temporary. The two line changes worked for me. Did you happen to change something else in BCM related to the headlights?

Which two line changes?? I only changed 1. As that’s what I was going off.

 

[Cdubya]

As-Built Lines 726-42-01 and 726-43-01 in BCM. I don't have the other things you have which may affect the functionality.

Here's i8iridium's original post:

https://www.explorerst.org/threads/interceptor-amber-drls-on-explorer-st.1559/page-3#post-69157