is the Ford Thinkware dash cam setup plug and play?

[Toadster]

https://accessories.ford.com/products/dashcam-with-rear-facing-camera-bundle-1

Details:
Dash Cams allow you to film the action while driving.

• Full HD 1080p (Forward Facing and Rear)
• 140 Degree Viewing Angle (Forward Facing) 160 Degree Viewing Angle (Rear)
• Super Night Vision 1.0
• Motion detection and impact sensor trigger the camera to record when in Parking Surveillance Mode
• Rear Camera w/ Connection Cable from Front-to-Rear Camera – 24.5ft
• OBD II Plug-n-Play Harness
• 32GB Micro SD Memory Card with Adapter
• Seamlessly install the dash cam and rear facing camera into your vehicle with this complete bundle
• Configure dashcam settings with easy-to-use software via built-in Wi-Fi

or is it just the camera you'd get from Thinkware and you setup manually?

 

[mycbtech]

it looks like it is meant for the Ford Transit vehicles.

Edit - looks like it has additional hookups to allow you to use your OBD to power the device so is compatible with all fords probably?

 

[jrgoffin]

It is plug-and-play. The harness is a jumper off the OBD port - very easy install and works great. The front camera took about 20 minutes, and I’ll run the rear whenever the weather warms up in my state.

 

[bmidd]

You can get those for any camera on Amazon, they run about $12.

 

[Jeppo]

It really isn’t a big deal to hardwire Thinkware cams to the fuse panel. I’m glad I did it. If you search around the forum, you’ll find discussions of that.