• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Lethal Spring

OP
R
Messages
291
Reactions
146
Points
37
Location
Roseville
Vehicle
2021 Explorer ST
Thread Starter #61
There really is a variance in spring height. I'm waiting for some replacement rear springs now from Lethal.
That will be interesting to see what difference you get.
 

Messages
308
Reactions
201
Points
37
Location
Punta Gorda, FL, USA
#62
Just went out in garage and fronts are hanging at 17” I did drive the car about 25 miles and filled the gas tank and I’m at 17 3/4 on rear. I think I’m happy with it. Someday somebody might sit in the back seat. Lol. Plus if I really want to get in something lower our C8 fits the bill. 0DB38F1D-9248-43D6-B944-11F187D471CE.jpeg
 

Cajun Heat

1000 Post Club
Messages
1,198
Reactions
597
Points
262
Location
Katy, TX, USA
Vehicle
2022 Explorer ST
#63
I measured the heights again today and I'm at 17" in the front and 17 3/4" in the rear. So they do look like there are settling some. I just had another alignment done this morning.
 

thenewguy

New Member
Messages
20
Reactions
6
Points
2
Location
Ottawa, ON, Canada
#64
but how different are these vs the H&Rs? Maybe someone with those can give similar measurements?
 

UNBROKEN

4000 Post Club
Messages
4,592
Reactions
5,368
Points
352
Location
Houston, TX, USA
#65
but how different are these vs the H&Rs? Maybe someone with those can give similar measurements?
Mine with H&R’s is 17” f/r but the rear of mine doesn’t really count with the extra audio weight. That won’t effect the front though and these Lethal springs were advertised as a lower option than H&R…which they pretty clearly aren’t.
 

thenewguy

New Member
Messages
20
Reactions
6
Points
2
Location
Ottawa, ON, Canada
#66
Mine with H&R’s is 17” f/r but the rear of mine doesn’t really count with the extra audio weight. That won’t effect the front though and these Lethal springs were advertised as a lower option than H&R…which they pretty clearly aren’t.
This is exactly what I've been asking them, put one side by side and lets see visually how different they are, if measurements are coming out to be the same, the hecks the difference lol
 

Messages
308
Reactions
201
Points
37
Location
Punta Gorda, FL, USA
#67
Mine with H&R’s is 17” f/r but the rear of mine doesn’t really count with the extra audio weight. That won’t affect the front though and these Lethal springs were advertised as a lower option than H&R…which they pretty clearly aren’t.
Mine with H&R’s is 17” f/r but the rear of mine doesn’t really count with the extra audio weight. That won’t effect the front though and these Lethal springs were advertised as a lower option than H&R…which they pretty clearly aren’t.
This is exactly what I've been asking them, put one side by side and lets see visually how different they are, if measurements are coming out to be the same, the hecks the difference lol

No rear coil binding with a bit smoother ride.
 

OP
R
Messages
291
Reactions
146
Points
37
Location
Roseville
Vehicle
2021 Explorer ST
Thread Starter #68
This is exactly what I've been asking them, put one side by side and lets see visually how different they are, if measurements are coming out to be the same, the hecks the difference lol
I cant remember where but there is a comparison and Lethals looked lower. Might even be on their website. (sorry bad memory)
If you read thru the posts it seems none of the springs are consistent. It could be measuring errors the different years or just the way it is? But seems 17" in front is the lowest posted so far (HR and Lethal springs both) Lethal 17.5 in back seems to be the lowest from whats posted. there was even a poster with steedas that were as low as Lethals.
 

F=MA

Active Member
Messages
947
Reactions
625
Points
232
Location
Wichita, KS, USA
#69
H&R 's - 17 3/8 " front and 17 3/4" rear.
 

Messages
391
Reactions
360
Points
67
Location
Rancho Santa Margarita, CA, USA
Vehicle
2020 Explorer ST
#70
Steeda: 17 3/8" front, 18 3/8" rear, installed just over a month.
 

Last edited:

Cdubya

1000 Post Club
Messages
1,697
Reactions
847
Points
262
Location
NE Ohio
Vehicle
2020 Explorer ST
#71
Can those listing measurements also include how long you've had the springs on your car? i have a feeling settling continues past the first few weeks, although less.
 

UNBROKEN

4000 Post Club
Messages
4,592
Reactions
5,368
Points
352
Location
Houston, TX, USA
#72
I have the very first run of H&R’s…possibly one of the first sets installed. I’m the one that had to figure out the rear alignment. lol
 

Cdubya

1000 Post Club
Messages
1,697
Reactions
847
Points
262
Location
NE Ohio
Vehicle
2020 Explorer ST
#73
No rear coil binding with a bit smoother ride.
2-3 coils touching is nothing abnormal with many progressive springs, especially H&R. They maybe inactive at resting position but when the wheels drops down on the road, they will soften the return to compression. I've had the same on H&Rs with two previous setups.
 

EdMan63

New Member
Messages
15
Reactions
16
Points
2
Location
Farmington Hills MI
Vehicle
2023 Explorer ST
#74
Installed Steeda springs on 2/9/23. Measured today and front is 17 3/4 and rear is 18 3/8's. So pretty consistent with many measurements seen here and pretty much what they advertise. I measured a stock unit here at work and front is 19 1/4 and rear is 19 1/2.
 



Top