-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!
MBRP Exhaust
- Thread starter ST PETE
- Start date
Lots of good ones out there. You need to know what you want. Are you looking for loud? Looking for a larger diameter? Looking for black tips? Looking for better flex joints? Looking for 304 stainless steel. Any of these things may be a consideration.
I bought the Thermal R&D from @ron@whooshmotorsports. It's exactly everything that I wanted.
Actually, it was the only system that checked all of my boxes. Couldn't be more pleased. While it may not be the cheapest you can buy the Mid Pipes with a better flex joint than the ones Ford uses. You may want to look at this setup.
I bought the Thermal R&D from @ron@whooshmotorsports. It's exactly everything that I wanted.
Actually, it was the only system that checked all of my boxes. Couldn't be more pleased. While it may not be the cheapest you can buy the Mid Pipes with a better flex joint than the ones Ford uses. You may want to look at this setup.
Last edited:
-
2
- Show All
I picked out the Corsa from Lethal Performance. At the time, I only saw the Borla and the Magnaflow. I was comparing sound clips on youtube when I thought to look up Corsa I loved the sound. Maybe I would have chosen something else if I had done more research on here But I am still very happy with my purchase. And more importantly...so is the wife and kids who are in the vehicle more than I
I just did the MBRP axle back with carbon tips and I couldn't be happier. I was gonna do more but with it being a daily driver I think this is all I really need. Still fairly quiet at idle/cruise, really opens up under load. I have noticed a little drone here and there at certain rpms but its not overbearing.
Fantastic sound and a great bang for the buck, just a few posts down:
https://www.explorerst.org/threads/new-gibson-axle-back-kit-in-the-works.2885/
https://www.explorerst.org/threads/new-gibson-axle-back-kit-in-the-works.2885/
I have the mbrp installer series, which is aluminum. Not a true catback as it goes from the flex pipes back. True dual 2.5in after that. The kit was 809.00 all in. Sounds great at cold start, and Idle. Can be a bit loud wide open. The tips are 304 stainless and are 4 inch. I'm happy with the kit, just wish it would have came with downpipes back
I went with the Gibson Axle back and had it installed yesterday, it looks good and give a nice sporty tone. I did have mine welded on. The installer did have to make a few adjustments to the passenger side. The hanger bar on the muffler was a little off causing it to be off center and slightly downward. But he did a little heating with a torch and bending and was able to get everything spot on. Took them about 75 min to install and adjust.
