Out of sheer boredom and a little curiosity because I forgot some things I went through my whole car and made a list of everything I've done to date or have on deck to install.
This is where it's at.
Post up yours...I'm always curious what everyone else is doing.
Interior:
P3 Cars vent gauge
Blendmount
Escort Redline 360C radar detector
Escort M2 dash cam
Newer piano black dash bezel
Smooth dash trim wrapped piano black
Stainless door panel trim
Stainless pedal covers
Stitching Cover steering wheel recovered with red sight line added
Aviator full size rear console with oem ambient lighting
Dash Design DashTex dash mat with interior matching stitching added
Short 2nd row headrests
Ceramic window tint all around including pano roof and windshield
Steering wheel emblem overlay
Red kevlar start button with light modded to change from green to blue
K&N washable cabin filter
Exterior:
Imported Euro headlights
Waido front splitter
Waido side skirts
Waido rear mid-wing
OEM Timberline black grille emblem
ST-Line grille
Shaved rear Explorer panel above license plate
Shaved driver door key hole
Shaved license plate holes in front bumper
Zeus 3D smooth painted hitch cover
Rear OEM belly pan added
Diode Dynamics LED turn and reverse bulbs
Roof rail delete
License plate LED's added then flipped the right side to aim correctly
Houston Speed Freaks rear wiper delete - my prototype design
Tinted rear bumper reflectors
Lamin-X tint on turn/reverse area on tail lights
OCD Plug vinyl covers on A, B and D pillars
UPR piano black lower door inserts
Custom vented hood with Jeep Rubicon vents
Houston Speed Freaks skidplate
Engine:
SPD catted downpipes
Thermal R&D 3" exhaust
Vibrant Ultra Quiet resonators X2
FenFab raw coolant tank
FenFab raw hot side piping
FenFab raw cold side pipe w/Turbosmart BOV
Custom raw aluminum ECM cover
Custom raw aluminum strut tower brace
Whipple intercooler
PPE aluminum trans pan
S&B air intake with custom no-logo lid
SPD 170 degree thermostat
NGK colder spark plugs
Verus Engineering raw billet caps
UPR oil catch can with drain valve
Continental style ethanol sensor
ZFG tuned with 91, 93 and E50 tunes
HP Tuners MPVi2
Redline Tuning pneumatic hood struts
Suspension:
BC Forged EH181 22X10.5 +30
Atturo AZ850 305/35/22
McGard spline drive lug nuts
Rotora brake kit 16" front w/8 pot calipers 15" rear w/4 pot calipers
PIU shocks and struts
Afe front swaybar with adjustable end links
Steeda rear swaybar with adjustable end links
H&R drop springs
FenFab billet vertical links
Steeda adjustable toe links
Dual JXB bushing inserts
Steeda subframe bushing inserts
ID Motorsports prototype rear diff brace
Audio:
Lincoln Aviator screen swap with custom acrylic bottom trim
Screen mount from Dariusz Kedzior
Dash converted to 8" trim and storage tray
Nav TV Zen A2B interface
Helix Ultra DSP
Helix Director controller
Mosconi Pro 5/30 X2 - One amp per side of car
Focal TBM tweeter
Focal 3.5WM midrange
Focal 8WM midbass
Blam FRS3N50 wideband
Acoustic Elegance IB15AU subs X2
X2 Power 96R AGM battery
Stinger wiring, fusing, distribution and optical
RSD Custom Cables silver core RCA's
Custom IB kick panel pods venting into the firewall
Custom a-pillars
Custom dash pods venting into the dash
Custom Baltic Birch IB sub enclosure venting through the spare tire well
Extensive sound treatments including CCF, CLD Armaflex, Tesa tape, butyl rope, lead shot, 3M Thinsulate, etc
This is where it's at.
Post up yours...I'm always curious what everyone else is doing.
Interior:
P3 Cars vent gauge
Blendmount
Escort Redline 360C radar detector
Escort M2 dash cam
Newer piano black dash bezel
Smooth dash trim wrapped piano black
Stainless door panel trim
Stainless pedal covers
Stitching Cover steering wheel recovered with red sight line added
Aviator full size rear console with oem ambient lighting
Dash Design DashTex dash mat with interior matching stitching added
Short 2nd row headrests
Ceramic window tint all around including pano roof and windshield
Steering wheel emblem overlay
Red kevlar start button with light modded to change from green to blue
K&N washable cabin filter
Exterior:
Imported Euro headlights
Waido front splitter
Waido side skirts
Waido rear mid-wing
OEM Timberline black grille emblem
ST-Line grille
Shaved rear Explorer panel above license plate
Shaved driver door key hole
Shaved license plate holes in front bumper
Zeus 3D smooth painted hitch cover
Rear OEM belly pan added
Diode Dynamics LED turn and reverse bulbs
Roof rail delete
License plate LED's added then flipped the right side to aim correctly
Houston Speed Freaks rear wiper delete - my prototype design
Tinted rear bumper reflectors
Lamin-X tint on turn/reverse area on tail lights
OCD Plug vinyl covers on A, B and D pillars
UPR piano black lower door inserts
Custom vented hood with Jeep Rubicon vents
Houston Speed Freaks skidplate
Engine:
SPD catted downpipes
Thermal R&D 3" exhaust
Vibrant Ultra Quiet resonators X2
FenFab raw coolant tank
FenFab raw hot side piping
FenFab raw cold side pipe w/Turbosmart BOV
Custom raw aluminum ECM cover
Custom raw aluminum strut tower brace
Whipple intercooler
PPE aluminum trans pan
S&B air intake with custom no-logo lid
SPD 170 degree thermostat
NGK colder spark plugs
Verus Engineering raw billet caps
UPR oil catch can with drain valve
Continental style ethanol sensor
ZFG tuned with 91, 93 and E50 tunes
HP Tuners MPVi2
Redline Tuning pneumatic hood struts
Suspension:
BC Forged EH181 22X10.5 +30
Atturo AZ850 305/35/22
McGard spline drive lug nuts
Rotora brake kit 16" front w/8 pot calipers 15" rear w/4 pot calipers
PIU shocks and struts
Afe front swaybar with adjustable end links
Steeda rear swaybar with adjustable end links
H&R drop springs
FenFab billet vertical links
Steeda adjustable toe links
Dual JXB bushing inserts
Steeda subframe bushing inserts
ID Motorsports prototype rear diff brace
Audio:
Lincoln Aviator screen swap with custom acrylic bottom trim
Screen mount from Dariusz Kedzior
Dash converted to 8" trim and storage tray
Nav TV Zen A2B interface
Helix Ultra DSP
Helix Director controller
Mosconi Pro 5/30 X2 - One amp per side of car
Focal TBM tweeter
Focal 3.5WM midrange
Focal 8WM midbass
Blam FRS3N50 wideband
Acoustic Elegance IB15AU subs X2
X2 Power 96R AGM battery
Stinger wiring, fusing, distribution and optical
RSD Custom Cables silver core RCA's
Custom IB kick panel pods venting into the firewall
Custom a-pillars
Custom dash pods venting into the dash
Custom Baltic Birch IB sub enclosure venting through the spare tire well
Extensive sound treatments including CCF, CLD Armaflex, Tesa tape, butyl rope, lead shot, 3M Thinsulate, etc
-
6
- Show All
