Rear wiper delete now available.

[UNBROKEN]

I did the homework and initial design on these then Travis at Houston Speed Freaks took on putting them into production. If you’re looking for the cleanest delete available here you go.

https://houstonspeedfreaks.com/products/20-23-explorer-rear-wiper-delete

 

[Mackdaddy]

Nice!

 

[mycbtech]

hows the process of taking off the whiper?

 

[MikeyP]

hows the process of taking off the whiper?

Super easy. Unbolt the wiper arm from the outside. Pull off the hatch interior panel, unscrew the wiper motor, put the plug in place. Was a 30 minute job.

 

[mycbtech]

Super easy. Unbolt the wiper arm from the outside. Pull off the hatch interior panel, unscrew the wiper motor, put the plug in place. Was a 30 minute job.

any problems pulling the plastics off the hatch? last time I tried to do that with my last explorer I ended up tearing a post on the panel cause it wouldnt come off.

 

[LSU Tigers]

I did the homework and initial design on these then Travis at Houston Speed Freaks took on putting them into production. If you’re looking for the cleanest delete available here you go.

https://houstonspeedfreaks.com/products/20-23-explorer-rear-wiper-delete

View attachment 17726 View attachment 17727 View attachment 17728

Ahh! I didn’t know that was your work. I’ll have to get this. Thanks!

 

[2020FordRaptor]

I did the homework and initial design on these then Travis at Houston Speed Freaks took on putting them into production. If you’re looking for the cleanest delete available here you go.

https://houstonspeedfreaks.com/products/20-23-explorer-rear-wiper-delete

View attachment 17726 View attachment 17727 View attachment 17728

What plug? I dont see a plug? You guys actually need to show what product your selling.

Dang that is very very clean.

 

[ARC]

So much for an easy job.
I couldn't get the wiper arm off the shaft of the motor.
My only option was to cut the shaft off.
I hope these motors aren't that expensive if I ever want to replace it.
Sometimes my anger gets the best of me!

 

[bhunted1]

So much for an easy job.
I couldn't get the wiper arm off the shaft of the motor.
My only option was to cut the shaft off.
I hope these motors aren't that expensive if I ever want to replace it.
Sometimes my anger gets the best of me!

Coulda been worse and used a hammer. Never good.


Sent from my iPhone using Tapatalk

 

[STJIM]

Bought this at Auto zone a few yrs ago. Had to nip off the end of threaded part to make it fit but it works great!

 

[Daamus]

I did the homework and initial design on these then Travis at Houston Speed Freaks took on putting them into production. If you’re looking for the cleanest delete available here you go.

https://houstonspeedfreaks.com/products/20-23-explorer-rear-wiper-delete

View attachment 17726 View attachment 17727 View attachment 17728

I cam across a video on youtube of them installing this wiper delete, looks good but im wondering how good the seal is. have you run into any leakage problems?

 

[ARC]

I cam across a video on youtube of them installing this wiper delete, looks good but im wondering how good the seal is. have you run into any leakage problems?

I added rtv sealant around the outside, so far no problems and I wash my car 2 to 3 times per week.

 

[Daamus]

I added rtv sealant around the outside, so far no problems and I wash my car 2 to 3 times per week.

Nice, thanks!

 

[Trathferd]

I had to cut off the wiper too.

 

[ARC]

I had to cut off the wiper too.

Yeah but it looks so much better.