Review: Steeda front and rear sway bars, Steeda tower brace and Eibach lowering springs installed

[FlatSpot]

I live in the foothills of the Blue Ridge Mountains where I have tons of great windy roads with fast switch backs. After driving my 25' ST stock for a couple of months, I figured it was time to work on the suspension. Reason: The SUV felt tall and top heavy when trying to take the turns at an accelerated speed. I never really felt confident taking them at the suggested speed limit. So, I installed the Eibach lowering springs, Steeda's front and rear sway bars along with the Steeda links, and the Steeda tower brace and here is my review.

Knowing what I know now, would I do it again?

Steeda Tower Brace: This is a no brainer. The stamped steel Ford put on this car is a joke (in my opinion). Its thin, it bends easily, and I think they put it on for aesthetics only. On the other hand, the Steeda tower brace is no joke. High quality, easy to install and looks great. The car feels better in the turns for sure. Would I buy it again? Yes

Steeda Front Sway Bar and Links: After seeing the stock (OEM) sway bar in person during the install, I'm not sure I really gained much with the Steeda sway bar. Both are very thick and heavy. The car does feel a bit tighter in the steering, but probably not enough to justify the price of the links and sway bar and labor (if paying someone else). Would I buy it again? Probably not. I would save the money and put it towards something else.

Steeda Rear Sway Bar: Yes, Yes, Yes! No comparison between stock sway bar and Steeda's. It was a night and day difference. The rear of the car felt planted and firm. I used the middle settings to start off with and I don't think I need to be more aggressive as it gives me all the confidence for the rear in the corners. Would I do it again? Hell, Yes!

Eibach Lowering Springs: Wow, this SUV turned into a station wagon after installing these. It lowered the car at least 1.5" and changed the looks drastically. The car feels amazing in the turns, well planted, and looks sharp. However, I sort of miss the SUV feel of sitting just a little higher. The ride is OEM quality as it goes over bumps with grace. I haven't towed anything yet, so I can't comment about that. Would I do it again? Yes and No. I think I would go with a different brand that lowers it maybe only .75 - 1". Shortly after install, I saw Steeda announce they have a lowering spring kit that I think would be ideal. Lower the car perhaps 1" to get the benefits of feeling planted while cornering, but without losing the SUV feel. If I could do it over without spending another fortune, I would go with the Steeda springs instead.

 

[UNBROKEN]

I agree with most of your assessment. I’ve been saying a front bar isn’t needed ever since I installed one of the very early Afe front bars. Anyone that does should set it at its softest setting…IRS cars just don’t need a lot of front bar.
As for the rear bar…set in on the firmest setting. IRS cars like a lot of rear bar.
None of the adjustable links are necessary. I’ve broken multiple adjustable front links now and one adjustable rear link. OEM is fine.
The strut bar I disagree with you. If you look at how the car is built and then under the cowl where you’ll find the large, tubular bars that triangulate the strut towers and cowl you’ll see where the real work is done and why the oem bar, and all the aftermarket bars, are cosmetic only. I’ve ran my favorite roads at max effort with and without a strut tower bar installed, there’s no discernible difference either way. It’s been discussed ad nauseam here if you get bored and feel like searching out some good reading on the subject.
Your next mod that’ll give you immediately noticeable results are the FenFab rear subframe bushing brace kit followed by their stiffer toe links.

 

[FlatSpot]

@UNBROKEN, I wish I had read your reviews about the front sway bar before hand and saved myself hundreds of dollars. As far as the strut brace, I feel that the $200 plus easy installation made a difference in the way the front-end handles. It's a relatively cheap upgrade, easy installation, esthetically pleasing to look at under the hood and noticeable better handling, so that's why I recommend it.