• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Software

Bruck

New Member
Messages
14
Reactions
3
Points
2
Location
Vernon, CT, USA
Vehicle
2022 Explorer ST
#1
When you are starting up the vehicle, do you find that the software is really slow to boot up or is it just me? It makes me want to plug a RAM chip in there somewhere!!!
 

Messages
122
Reactions
81
Points
27
Location
Bowie, MD, USA
Vehicle
2021 Explorer ST
#2
It's not just you mine slow too.
 

OP
B

Bruck

New Member
Messages
14
Reactions
3
Points
2
Location
Vernon, CT, USA
Vehicle
2022 Explorer ST
Thread Starter #3
Any solutions?
 

OP
B

Bruck

New Member
Messages
14
Reactions
3
Points
2
Location
Vernon, CT, USA
Vehicle
2022 Explorer ST
Thread Starter #5

Rick

Member
U.S. Army Veteran
Law Enforcement
Messages
251
Reactions
166
Points
37
Location
Fort Hood, TX, USA
Vehicle
Rapid Red
#6
I don’t possess that skill
when you can snatch the pebble from his hand it will be time for your software to boot up

 

Last edited:

Sgt1411

Member
Law Enforcement
Messages
239
Reactions
151
Points
37
Location
BC&AZ
Vehicle
2021 ST
#7
When you are starting up the vehicle, do you find that the software is really slow to boot up or is it just me? It makes me want to plug a RAM chip in there somewhere!!!
Welcome to SYNC3 and its performance, that's one of the reasons SYNC is the lowest ranked multimedia software of the big 3. SYNC4 isn't much better, Mach E boot up is just as slow. Very poorly executed. If you get a chance use U-Connect and see how it performs.....right now its the benchmark.
 

st8

1000 Post Club
Messages
1,074
Reactions
479
Points
212
Location
Bel Air, MD, USA
#8
Welcome to SYNC3 and its performance, that's one of the reasons SYNC is the lowest ranked multimedia software of the big 3. SYNC4 isn't much better, Mach E boot up is just as slow. Very poorly executed. If you get a chance use U-Connect and see how it performs.....right now its the benchmark.
Maybe don’t try it actually lol would then really make the sync system look bad.
 

Messages
31
Reactions
17
Points
2
Location
littlestown, Pennsylvania
Vehicle
2022 explorer ST
#9
having used both uconnect and sync, i have to disagree. uconnect might be faster but i think it kinda sucks tbh
 

UNBROKEN

4000 Post Club
Messages
4,587
Reactions
5,362
Points
352
Location
Houston, TX, USA
#10
So I’m not the only one that hears the old AOL tone when I start the car?
 

Messages
120
Reactions
34
Points
27
Location
Woodstock, GA, USA
#11
I tried to update mine using the USB downloaded from Ford and it's been saying Updating Software while I'm driving down the road for a couple months now. I called Ford and they said I'd have to leave the car with them for a day or two for them to diagnose the problem and that their software guy is only there twice a week. Pain in the ass. I've heard from other Ford owners in the neighborhood that it's pretty common. Can't say I'm happy about it but I guess I'll have to leave it with them soon.
 

Dale5403

1000 Post Club
Messages
1,976
Reactions
1,990
Points
262
Location
Mondovi, WI, USA
#12
I tried to update mine using the USB downloaded from Ford and it's been saying Updating Software while I'm driving down the road for a couple months now. I called Ford and they said I'd have to leave the car with them for a day or two for them to diagnose the problem and that their software guy is only there twice a week. Pain in the ass. I've heard from other Ford owners in the neighborhood that it's pretty common. Can't say I'm happy about it but I guess I'll have to leave it with them soon.
Have you tried to unplug the flash drive and start the install over? Not sure if if would help but might be worth a try. Good luck.
 

Messages
120
Reactions
34
Points
27
Location
Woodstock, GA, USA
#13
Have you tried to unplug the flash drive and start the install over? Not sure if if would help but might be worth a try. Good luck.
Yeah I tried that as well as rebooting the whole thing and starting over. Nothing worked.
 

Dale5403

1000 Post Club
Messages
1,976
Reactions
1,990
Points
262
Location
Mondovi, WI, USA
#15
Yeah I tried that as well as rebooting the whole thing and starting over. Nothing worked.
Are you able to connect your Explorer to wifi? If so you could try to do the update over the air. Was your flash formated to exFAT ?
 

Messages
120
Reactions
34
Points
27
Location
Woodstock, GA, USA
#16
Are you able to connect your Explorer to wifi? If so you could try to do the update over the air. Was your flash formated to exFAT ?
It stopped connecting to WiFi when it said it needed the update. The Ford Connect is working so I don't think the modem is down but it won't connect to my home network. It'll find it but it won't connect.
 

Dale5403

1000 Post Club
Messages
1,976
Reactions
1,990
Points
262
Location
Mondovi, WI, USA
#17
Well darn the luck. About the only other thing I can think of is to try to use a different flash drive. Make sure its empty and then format it to exFat. Then download again and see if that works.
 

Jeppo

Active Member
Messages
502
Reactions
280
Points
82
Location
Davidson County, NC
Vehicle
2021 ST
#18
It stopped connecting to WiFi when it said it needed the update. The Ford Connect is working so I don't think the modem is down but it won't connect to my home network. It'll find it but it won't connect.
I have a Mesh Network and found my ST would only connect if I disabled the Mesh setting for it.
 

GearHead_1

1000 Post Club
Messages
1,557
Reactions
1,301
Points
262
Location
Utah
Vehicle
Exploder
#19
@Love Tractor When installing an update on my truck my result was much the same as yours. The drive was new and formatted correctly the files were nested as they should be but no soap. I bought a little more high-end Samsung thumb drive and started over, it loaded just as it should in short order.

Others on the F150Ecoboost forum had the same issue. I sent that same drive to several more members and it worked for them in each case. They were all great members. I was just giving any of them the drive. They all sent it back to me and a couple of them threw $5 in to cover my shipping costs (totally unnecessary). I was just glad it helped them out. Do make sure that the files reside where they are supposed to on the drive according to Ford's instructions.
 

Last edited:

Dale5403

1000 Post Club
Messages
1,976
Reactions
1,990
Points
262
Location
Mondovi, WI, USA
#20
@Dale5403 When installing an update on my truck my result was much the same as yours. The drive was new and formatted correctly the files were nested as they should be but no soap. I bought a little more high-end Samsung thumb drive and started over, it loaded just as it should in short order.

Others on the F150Ecoboost forum had the same issue. I sent that same drive to several more members and it worked for them in each case. They were all great members. I was just giving any of them the drive. They all sent it back to me and a couple of them threw $5 in to cover my shipping costs (totally unnecessary). I was just glad it helped them out. Do make sure that the files reside where they are supposed to on the drive according to Ford's instructions.
Thanks for sharing that. First I've heard it but will file that idea away for the next update. If and when one comes out.
 



Top