• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Sun Roof Fabric Issue

Iggles

New Member
Messages
2
Reactions
0
Points
1
Location
New jersey
Vehicle
Explorer st
#21
Hey gang. My first post here. Just got my st 2 weeks ago. Certified used car. Anyways, the fabric is hanging.
I'm bringing it in next week. I'll update with any info on the repair. It is covered by warranty. I don't see a reason for moonroof to be removed
 

Messages
25
Reactions
4
Points
2
Location
San Jose, CA
Vehicle
2020 Ford Explorer ST
#22
Hey gang. My first post here. Just got my st 2 weeks ago. Certified used car. Anyways, the fabric is hanging.
I'm bringing it in next week. I'll update with any info on the repair. It is covered by warranty. I don't see a reason for moonroof to be removed
Hey Iggles,
Did they end up repairing your sunshade? Was it repaired under warranty and how long did it take them?

I found the clip that popped off. It seems like the clip pops off on one side making the fabric get stuck in the rail. This then binds pulling the other side still clipped out of the rail so it sags. Also, the roller mechanism doesn't roll it up for some reason could be because the front is binding putting tension on the roller. If I could figure out how to get the back to roll it up, I'd just get the roof tinted and would not need to deal with the sunshade.
 

Attachments

Last edited:
Messages
88
Reactions
35
Points
17
Location
Chicago
Vehicle
2020 Explorer St
#23
Anyone ever tackle this themselves?
 

Messages
220
Reactions
108
Points
27
Location
Sumner County TN
Vehicle
2025 Ford Explorer ST 400a
#24
Hey Iggles,
Did they end up repairing your sunshade? Was it repaired under warranty and how long did it take them?

I found the clip that popped off. It seems like the clip pops off on one side making the fabric get stuck in the rail. This then binds pulling the other side still clipped out of the rail so it sags. Also, the roller mechanism doesn't roll it up for some reason could be because the front is binding putting tension on the roller. If I could figure out how to get the back to roll it up, I'd just get the roof tinted and would not need to deal with the sunshade.
According to what I’ve heard. They recommend not tinting moon roof further than factory. Supposedly, the heat in the layered glass will cause it explode/crack.


Sent from my iPhone using Tapatalk
 



Top