-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!
Timberline Skid plate
- Thread starter Greywolf
- Start date
Mine is due in. 31 July
Last week I sat down with my parts guy at the dealer and found a weird parts issue
If you use ford accessories it shows a few available
If you search in ford parts..it conflicts and won't show you it for ST..
So it orders then was being kicked back
So he re orderd in ford accessories
2 of them , one for his explorer one for mine
Last week I sat down with my parts guy at the dealer and found a weird parts issue
If you use ford accessories it shows a few available
If you search in ford parts..it conflicts and won't show you it for ST..
So it orders then was being kicked back
So he re orderd in ford accessories
2 of them , one for his explorer one for mine
yes two 3 inch strips to see if it will reduce the TING noise from driving and stuff bouncing off it
we have horribly ROCKY road surfaces the pea gravel in the asphalt the last few years here is beating the crap out of the bottom of our cars
It's actually made by canopus
It's very less costly than dynamat
So it's sacrificial
I was going to put it on the other side of the plate, but space is a premium and I wanted to make sure it didn't melt or have any unforseen issues
It may be un needed .only a few drives will tell
My hearing is shot at certain frequencies
Except those high pitched tings or rattles
So I try to mitigate as much as possible
I will say the explorer is a whole lot quieter than the edge , but my f150 is really quiet
Been playing with the anc and fake engine noise settings to take advantage of the tech..but anc and fake engine are tied together, but I have stumbled on a possible best of both works scenario
Will put it in forscan sheet after more testing
we have horribly ROCKY road surfaces the pea gravel in the asphalt the last few years here is beating the crap out of the bottom of our cars
It's actually made by canopus
It's very less costly than dynamat
So it's sacrificial
I was going to put it on the other side of the plate, but space is a premium and I wanted to make sure it didn't melt or have any unforseen issues
It may be un needed .only a few drives will tell
My hearing is shot at certain frequencies
Except those high pitched tings or rattles
So I try to mitigate as much as possible
I will say the explorer is a whole lot quieter than the edge , but my f150 is really quiet
Been playing with the anc and fake engine noise settings to take advantage of the tech..but anc and fake engine are tied together, but I have stumbled on a possible best of both works scenario
Will put it in forscan sheet after more testing
Last edited:
- Messages
- 40
- Reactions
- 20
- Points
- 2
- Location
- New Hampshire
- Vehicle
- (2) 2021 Explorer ST (White & Carbonized Grey)
Price increase proves they are a popular deal
I don't understand why it's not a standard item. And they are not making 2025 timberline, so there has to be some 3xcess parts around
The timberline fird accessories off road lights that fit in grill are very good
May have to think a grill change
I don't understand why it's not a standard item. And they are not making 2025 timberline, so there has to be some 3xcess parts around
The timberline fird accessories off road lights that fit in grill are very good
May have to think a grill change
-
1
- Show All
