UNBROKEN’s Iconic Silver ST build

[flhx06]

So I really dig the 4.5” tips AWE uses…and eBay is full of exhaust tips so…dual 4.5”s on the way.

They do look good....even on a filthy car

 

[UNBROKEN]

They do look good....even on a filthy car

View attachment 28089

Yea they look really good.

 

[UNBROKEN]

I didn’t like the tiny oem hardware holding the skid plate on…and I do like overkill…so I added 5 riv-nuts for M8-1.25 socket head bolts and it’s definitely solid now.

 

[UNBROKEN]

Modified Aviator screen almost complete.

 

[ConspicuousConsumption]

I was figuring you’d do that. Also it’s super unchill if you don’t give us the how to or a way to buy your lower part

 

[UNBROKEN]

I was figuring you’d do that. Also it’s super unchill if you don’t give us the how to or a way to buy your lower part

I started a thread to show everything that’s being done in case anyone wants to mimic the process. As far as buying…I highly doubt anyone would be nutty enough to spend what this costs. lol
Labor alone is more than what both screens cost.

 

[TheHypnoToad]

Modified Aviator screen almost complete.
View attachment 28122

Given your attention to detail, it will be interesting to see how the final installation looks.

 

[UNBROKEN]

Big boys showed up. They may be a little short which is an easy fix…I’ll find out tonight. View attachment IMG_5961.jpeg

 

[UNBROKEN]

Ok…do the China dual 4.5’s fit? Yes and no. Yes they fit the bumper just fine and the length is long enough to slip onto the muffler outlet but the tip inlet is substantially larger than the muffler outlet. I had to cut a sleeve from 3” tubing then cut that in half to take up the slack. Once I drive it a bit and let the exhaust settle and readjust it I’ll have throw a tack weld on to be safe.

 

[Love Tractor]

Yo @UNBROKEN finally decided to hook up your original wheel setup because the spacers I was running with stock wheels were destroying the front tread. I appreciate the testing you did.

 

[UNBROKEN]

I need a few more things to show up but soon this will be the vent in the spare tire well for the subs.

 

[UNBROKEN]

Everything is back from paint and better than I hoped. Reassembly tomorrow.

 

[UNBROKEN]

It came out as well as I could have hoped. Pretty much spot on to my “render”. Still needs a lot of cleaning and paint correction on the rest of the car and I can’t wait to get the new wheels on. View attachment IMG_6015.jpeg

 

[viking]

Looking Good as Always!!

 

[23 Explorer ST]

It came out as well as I could have hoped. Pretty much spot on to my “render”. Still needs a lot of cleaning and paint correction on the rest of the car and I can’t wait to get the new wheels on. View attachment 28221 View attachment 28222 View attachment 28223 View attachment 28224

Outstanding!!


Sent from my iPhone using Tapatalk

 

[GearHead_1]

@UNBROKEN , do you have any pictures of the underside of the hood as it sits now?

 

[njtta150]

Gonna be a long week waiting on paint work. These Euro heads with lightly tinted PPF are ridiculously awesome


View attachment 28010 View attachment 28011

What is different with the euro headlights compared to U.S.?

Sent from my SM-T307U using Tapatalk

 

[UNBROKEN]

What is different with the euro headlights compared to U.S.?

Sent from my SM-T307U using Tapatalk

They have a clear va orange reflector on the side. I haven’t had them on at night yet so don’t know if they’re the same brightness or what. They do have a height adjuster for both beams unlike the US lights.

 

[UNBROKEN]

I can’t wait for the new wheels…it’s gonna be sick.

 

[Flyman]

Dayum.
Fit and finish look really tight.