• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!


Warning chime tone change

M

mitchellyST

Member
#1
Messages
34
Reactions
5
Points
2
Location
Rochester, NY, USA
#1
Recently I’ve experienced changes in the way the warning chimes sound. I noticed it right away while backing up and it also does it with the initial startup beeps. It sounds like it’s coming through a crappy speaker behind the dash. Usually it comes through the main speakers.
 

F

Ford Guy

Member
#2
Messages
409
Reactions
113
Points
37
Location
Toronto, ON, Canada
#2
I have experienced this as well.
Who knows lol..
 

OP
M

mitchellyST

Member
Thread Starter #3
Messages
34
Reactions
5
Points
2
Location
Rochester, NY, USA
Thread Starter #3
Ford Guy said:
I have experienced this as well.
Who knows lol..
Click to expand...
My car is going in probably week for something else and they’re going to look at it. Found another thread online about this issue and it could be related to the BCM connection. I have some other electrical gremlins and this could be the fix . I will update!
 

F

Ford Guy

Member
#4
Messages
409
Reactions
113
Points
37
Location
Toronto, ON, Canada
#4
Y
mitchellyST said:
My car is going in probably week for something else and they’re going to look at it. Found another thread online about this issue and it could be related to the BCM connection. I have some other electrical gremlins and this could be the fix . I will update!
Click to expand...
Please do keep us informed, tks.
 

S

sadeen

Member
#5
Messages
358
Reactions
194
Points
37
Location
Ashburn, VA
Vehicle
2020 Explorer ST
#5
Do you have the current Sync version? I've had the tones change during / after an update and then it reverts to the normal tones after a bit.
 

F

Ford Guy

Member
#6
Messages
409
Reactions
113
Points
37
Location
Toronto, ON, Canada
#6
sadeen said:
Do you have the current Sync version? I've had the tones change during / after an update and then it reverts to the normal tones after a bit.
Click to expand...
I haven`t updated yet..Worried to change anything lol. I don`t mind the chime changes.. I just get use to the sounds the car makes :)
 

Z

zdubyadubya

Active Member
#7
Messages
813
Reactions
636
Points
232
Location
Utah
Vehicle
2020 ST
#7
sadeen said:
Do you have the current Sync version? I've had the tones change during / after an update and then it reverts to the normal tones after a bit.
Click to expand...
here's the winner. it will change to a less refined beep right after an update of some kind. drive for a little while or do a few key cycles and it will revert back to normal.
 

OP
M

mitchellyST

Member
Thread Starter #8
Messages
34
Reactions
5
Points
2
Location
Rochester, NY, USA
Thread Starter #8
I’ve tried to update the sync system but it will not update in the background like it’s supposed to. It also will not pick up where it left off either. I’m going to address this issue on my next service visit.
 

S

sadeen

Member
#9
Messages
358
Reactions
194
Points
37
Location
Ashburn, VA
Vehicle
2020 Explorer ST
#9
You can also create a USB thumb drive from Ford's Owner site to update. It is also faster :)
 

You must log in or register to reply here.

Explorer ST Posts



Top