What Have You Done To Your Explorer ST Today

[BrooseDaMoose]

4-Wheel alignment was done today from the small lift over the weekend.

Friday, I'm getting the front windshield and the front drivers and passengers windows ceramic tinted. I'm going as light as possible (I believe its 50%) because the side dirvers and passengers windows already have a light factory tint. Same with the windshield, I want to cut way down on the UV and heat but I want it to be as light as possible. I always put up a windshield shade in the summer months but this will help year round.

Looks great!


Sent from my iPhone using Tapatalk

 

[pgk1]

Its what I like. Some like lowering and some don't. The only off-roading I do with it is during deer season. I have lots of other toys for real off-roading. I hate the look of stock or lowered vehicles plus I like the added height for towing. I have AirLift air bags in the rear which help it to not squat when towing and keep it leveled. My tongue weight is near 400 lbs.

I built my truck to where the bed alone is higher than the garage door opening so I guess its my thing, going higher.

View attachment 27859 View attachment 27860

Beautiful looking F150!

 

[Caster]

Beautiful looking F150!

Thank you! Its a 2004. I ordered it brand new and built the hell out of it. It doesn't quite have 17,000 miles on it in 21 years.

 

[pgk1]

Is that a quick tach lower rear bumper?

 

[Caster]

Is that a quick tach lower rear bumper?

They are Kentrol, stainless bumpers. I added (2) 1 1/4" hitch receivers facing down on the front, and (2) at the rear of the truck. Then I made aluminum bracketry to attach to the bumpers, and to go up inside the hitch receivers on the truck to mount the bumpers. The bumpers are removeable by pulling stainless coupler pins. Of course I added anti-theft features to the pins so no one can just pull them and steal the bumpers.

 

[Ldstang50]

Vossen HF5 wheels. 22/10.5
Michelin Pilot PS4 SUV 315/35/22. I did the calculations and they’re less than 1” different from factory tire/wheel size
Steeda subframe supports
Steeda diff brace
Whoosh diff bolt
CV Fab FMIC
Thermal 3”
JXB drive shaft coupler
Eibach springs
Billet vertical links
HSF oil pan cover
Pennzoil ultra
OEM oil filter

Still waiting on:
FenFab Hot&cold piping
Tial BOV
JXB trans mount
Black badges

The plan is to be under the car once and take the bumper off once

The car has been outside as more and more parts arrived. Needless to say, the wife isn’t happy. I’m hopeing the trans mount arrives this week so I can install everything and get my garage back. I at least need the car lowered to ensure the tires fit

 

[Caster]

Vossen HF5 wheels. 22/10.5
Michelin Pilot PS4 SUV 315/35/22. I did the calculations and they’re less than 1” different from factory tire/wheel size
Steeda subframe supports
Steeda diff brace
Whoosh diff bolt
CV Fab FMIC
Thermal 3”
JXB drive shaft coupler
Eibach springs
Billet vertical links
HSF oil pan cover
Pennzoil ultra
OEM oil filter

Still waiting on:
FenFab Hot&cold piping
Tial BOV
JXB trans mount
Black badges

The plan is to be under the car once and take the bumper off once

The car has been outside as more and more parts arrived. Needless to say, the wife isn’t happy. I’m hopeing the trans mount arrives this week so I can install everything and get my garage back. I at least need the car lowered to ensure the tires fit View attachment 27901 View attachment 27902

Christmas in February!!!!

 

[Mikes 22St]

I am currently on day 4 of not having my ST, She went to the shop on Wednesday 1-29-25 for 2 TPMS sensors not working and Rear Defroster not working. First day I get a call around 4 pm that they cant do the TPMS sensors cause they cant find the lug nut socket {Spline drive lug nuts}. I drive to the dealership and with in 15 seconds I locate the socket right where I said it would be. Received calls on Thursday and Friday that the rear glass has not been completed yet. The glass had to be shipped to the dealer, ok fine they got the glass yesterday but they didn't have time, so possibly today I would get it back. Received a call today at 1pm saying well sorry we cant get it done today because the glass is glued in and they can only do the bolt in, so they have to have a Glass company do the work for them, and the earliest they can come is Monday possibly. That's contingent on the glass installer actually being available Monday! I am still under my Gold Certified Warranty and they did arrange a no cost rental for me but I don't like the car I was given. Its a BMW X5, I am sure some folks would like it but its just not something I prefer. its way smaller than my ST and not as fun to drive. Anyway just my little rant. Carry on and thanks for coming to my TED TALK!

So why dont you GO to the dealer and tgake ur ST back and tell them ur unhappy wikth the whole thing and ur taking the car and for them to call you when the glass company is ready , OR better yet tell the dealer to send the glass company to your house to do the work!!! This is typical dealer bullshit !!!!! Make sure you send in a comp;laiknt!!

 

[Mikes 22St]

Vossen HF5 wheels. 22/10.5
Michelin Pilot PS4 SUV 315/35/22. I did the calculations and they’re less than 1” different from factory tire/wheel size
Steeda subframe supports
Steeda diff brace
Whoosh diff bolt
CV Fab FMIC
Thermal 3”
JXB drive shaft coupler
Eibach springs
Billet vertical links
HSF oil pan cover
Pennzoil ultra
OEM oil filter

Still waiting on:
FenFab Hot&cold piping
Tial BOV
JXB trans mount
Black badges

The plan is to be under the car once and take the bumper off once

The car has been outside as more and more parts arrived. Needless to say, the wife isn’t happy. I’m hopeing the trans mount arrives this week so I can install everything and get my garage back. I at least need the car lowered to ensure the tires fit View attachment 27901 View attachment 27902

Man , those rims are sweet looking !!!!@Wow, def post a pic when ur done !!!!

 

[Mikes 22St]

They are Kentrol, stainless bumpers. I added (2) 1 1/4" hitch receivers facing down on the front, and (2) at the rear of the truck. Then I made aluminum bracketry to attach to the bumpers, and to go up inside the hitch receivers on the truck to mount the bumpers. The bumpers are removeable by pulling stainless coupler pins. Of course I added anti-theft features to the pins so no one can just pull them and steal the bumpers.

View attachment 27897

Wow, alot of work on that truck ! Do you take it to shows ??? that looks awesome. I had a 2000 dodge ram lifted and stuff done.I had an old blazer that was lifted and the engine completely redone. It seems like the phase of lifting trucks has died in New Jersey ?? , but everything seems to die here ! haha What do you get about 7mpg . Both mine got alittle more so im guessin jur a ligttle lower. But u dont build that to get miles per gallon ! So nice!!!

 

[Polizi212]

So why dont you GO to the dealer and tgake ur ST back and tell them ur unhappy wikth the whole thing and ur taking the car and for them to call you when the glass company is ready , OR better yet tell the dealer to send the glass company to your house to do the work!!! This is typical dealer bullshit !!!!! Make sure you send in a comp;laiknt!!

The Work was under Warranty, I was given a Loaner car under warranty, I was not advised of the Glass repair delay until the day I posted that. I have had the Vehicle back for some time and all is well. I was treated well and the work was completed! I just wanted to share my thoughts and experience! I have a good Relationship with this dealer one that I intend to keep as I upgrade my Explorer I know they will not give me issues. I have no need to poke that bear!